Giuseppe Cantore

发表

Numerical Investigation on the Effects of Water/Methanol Injection as Knock Suppressor to Increase the Fuel Efficiency of a Highly Downsized GDI Engine

Fabio Berni, Sebastiano Breda, Alessandro D'Adamo, 2015 .

Large-eddy simulation of cycle-resolved knock in a turbocharged SI engine

Sebastiano Breda, Alessandro D'Adamo, Giuseppe Cantore, 2015 .

L'impiego dei coefficienti di efflusso nelle simulazioni del ciclo dei motori alternativi a combustione interna (The use of discharge coefficients in thermo-fluid-dynamic numerical simulation of reciprocating internal combustion engines)

Alberto Boretti, Massimo Borghi, Enrico Mattarelli, 1997 .

Combustion System Development of an Opposed Piston 2-Stroke Diesel Engine

Carlo Alberto Rinaldini, Enrico Mattarelli, Tommaso Savioli, 2017 .

A new design concept for 2-Stroke aircraft Diesel engines

Carlo Alberto Rinaldini, Enrico Mattarelli, Giuseppe Cantore, 2014 .

A New Concept of Supercharging Applied to High Speed DI Diesel Engines

Stefano Fontanesi, Giuseppe Cantore, Enrico Mattarelli, 2001 .

Development of a Multi-component based Methodology for the Simulation of Reacting High Injection Pressure Diesel Sprays

Giuseppe Cantore, Simone Malaguti, Giuseppe Bagli, 2014 .

Optimization of injection law for direct injection diesel engine

Giuseppe Cantore, Paolo Casoli, P. Pelloni, 1992 .

Effects on knock intensity and specific fuel consumption of port water/methanol injection in a turbocharged GDI engine: Comparative analysis

Francesco Testa, Fabio Berni, Sebastiano Breda, 2015 .

Integrated Design and Testing Methodology for High - Performance Vehicle Thermal Systems

R. Fedeli, Giuseppe Cantore, G. Molinari, 1992 .

Analysis of hydraulic components using computational fluid dynamics models

Massimo Borghi, Massimo Milani, Giuseppe Cantore, 1998 .

Effects of Fuel-Induced Piston-Cooling and Fuel Formulation on the Formation of Fuel Deposits and Mixture Stratification in a GDI Engine

Alessandro D'Adamo, Giuseppe Cantore, Giuseppe Cicalese, 2015 .

Experimental Validation of a Gas Turbine Cycle Model Based on a Simultaneous Solution Method

R. Bettocchi, Pier Ruggero Spina, Giuseppe Cantore, 1994 .

Comparison of Four Stroke MotoGP Engines

Giuseppe Cantore, Enrico Mattarelli, 2004 .

Lumped Parameters Numerical Simulation of a Variable Displacement Vane Pump for High Speed ICE Lubrication

Fabrizio Paltrinieri, F. Tosetti, Massimo Milani, 2008 .

Knock Tendency Prediction in a High Performance Engine Using LES and Tabulated Chemistry

Christopher J. Rutland, Alessandro D'Adamo, Stefano Fontanesi, 2013 .

Comparison between 2 and 4-Stroke Engines for a 30 kW Range Extender

Carlo Alberto Rinaldini, Enrico Mattarelli, Giuseppe Cantore, 2014 .

Analysis of a 6 Cylinder Turbocharged HCCI Engine Using a Detailed Kinetic Mechanism

Fabian Mauss, Bengt Johansson, Thomas Morel, 2002 .

Enrico Mattarelli, Giuseppe Cantore, Enrico Mattarelli, 2004 .

A numerical characterization of new high-pressure multi-hole GDI injector

Stefano Fontanesi, Giuseppe Cantore, Simone Malaguti, 2010 .

CFD Investigation of Wall Wetting in a GDI Engine under Low Temperature Cranking Operations

Stefano Fontanesi, Giuseppe Cantore, Simone Malaguti, 2009 .

A New Concept for Ultra-Compact Automotive HSDI Diesel Engines

Giuseppe Cantore, Enrico Mattarelli, 2007 .

Effects of Fuel Composition on Charge Preparation, Combustion and Knock Tendency in a High Performance GDI Engine. Part I: RANS Analysis

Alessandro D'Adamo, Giuseppe Cantore, Nicola Giovannoni, 2015 .

A Numerical Investigation on the Potentials of Water Injection as a Fuel Efficiency Enhancer in Highly Downsized GDI Engines

Fabio Berni, Sebastiano Breda, Alessandro D'Adamo, 2015 .

An Analysis on Time Scale Separation for Engine Simulations with Detailed Chemistry

Federico Perini, Giuseppe Cantore, Rolf D. Reitz, 2011 .

Advances in The Design of Two-Stroke, High Speed, Compression Ignition Engines

Carlo Alberto Rinaldini, Enrico Mattarelli, Giuseppe Cantore, 2013 .

Comparison Between Steady and Unsteady CFD Simulations of Two Different Port Designs in a Four Valve HSDI Diesel Engine: Swirl Intensity and Engine Permeability

Stefano Fontanesi, Giuseppe Cantore, Luca Montorsi, 2004 .

Numerical Optimization of a Racing Engine with Variable Intake and Exhaust Geometry and Valve Actuation

Alberto Boretti, Massimo Borghi, Enrico Mattarelli, 1996 .

2-Stroke Externally Scavenged Engines for Range Extender Applications

Carlo Alberto Rinaldini, Enrico Mattarelli, Giuseppe Cantore, 2012 .

CFD optimization of a 2-stroke range extender engine

Carlo Alberto Rinaldini, Enrico Mattarelli, Giuseppe Cantore, 2015 .

Effects of relative port orientation on the in-cylinder flow patterns in a small unit displacement HSDI Diesel Engine

Stefano Fontanesi, Giuseppe Cantore, Vincenzo Gagliardi, 2005 .

COMBINED-CYCLE POWER PLANTS FROM GAS TURBINES AND GEOTHERMAL SOURCE INTEGRATION

Antonio Peretto, R. Bettocchi, Giuseppe Cantore, 1993 .

On Application of Nonlinear k-ε Models for Internal Combustion Engine Flows

Giuseppe Cantore, V. Michelassi, Gm Bianchi, 2002 .

Analysis of a HSDI diesel engine intake system by means of multi-dimensional numerical simulations: influence of non uniform EGR distribution

Carlo Alberto Rinaldini, Fabrizio Paltrinieri, Giuseppe Cantore, 2006 .

CFD Analysis of the Acoustic Behavior of a Centrifugal Compressor for High Performance Engine Application

Stefano Fontanesi, Giuseppe Cantore, Stefano Paltrinieri, 2014 .

Pressure balancing in external gear pumps and motors[Bilanciamento delle macchine oleodinamiche a ingranaggi esterni]

Massimo Borghi, Massimo Milani, Giuseppe Cantore, 1997 .

A Methodology to Improve Knock Tendency Prediction in High Performance Engines

Alessandro D'Adamo, Stefano Fontanesi, Giuseppe Cantore, 2014 .

A Numerical Investigation on the Potentials of Water Injection to Increase Knock Resistance and Reduce Fuel Consumption in Highly Downsized GDI Engines

Fabio Berni, Sebastiano Breda, Giuseppe Cantore, 2015 .

Assessment of the Potential of Proper Orthogonal Decomposition for the Analysis of Combustion CCV and Knock Tendency in a High Performance Engine

Christopher J. Rutland, Alessandro D'Adamo, Stefano Fontanesi, 2013 .

MODELLING OF PRIMARY BREAKUP PROCESS OF A GASOLINE DIRECT ENGINE MULTI-HOLE SPRAY

Luigi Allocca, Alessandro Montanaro, Stefano Fontanesi, 2013 .

Experimental and Computational Analysis of a High-Performance Motorcycle Engine

Alberto Boretti, Enrico Mattarelli, Giuseppe Cantore, 1996 .

LES Analysis of Cyclic Variability in a GDI Engine

Stefano Fontanesi, Giuseppe Cantore, Stefano Paltrinieri, 2014 .

Turbulence Modelling in CFD Simulation of ICE Intake Flows: The Discharge Coefficient Prediction

Gian Marco Bianchi, Stefano Fontanesi, Giuseppe Cantore, 2002 .

The Influence of Stroke-to-Bore Ratio and Combustion Chamber Design on Formula One Engines Performance

Gian Marco Bianchi, Enrico Mattarelli, Giuseppe Cantore, 1998 .

Experimental and Numerical Analysis of Forces on a Hydraulic Distributor

Massimo Borghi, Massimo Milani, Giuseppe Cantore, 1997 .

Optimum Performance Evaluation in Multistage Intercooled Compression Gas Turbines

R. Bettocchi, Giuseppe Cantore, G. Negri di Montenegro, 1991 .

Scavenge Ports Ooptimization of a 2-Stroke Opposed Piston Diesel Engine

Carlo Alberto Rinaldini, Alok Warey, Enrico Mattarelli, 2017 .

A 3D CFD Analysis of the High Speed Premixed Combustion Process

Gian Marco Bianchi, Giuseppe Cantore, T. Baritaud, 2003 .

Experimental and Theoretical Analysis of a Diesel Fuel Injection System

Alberto A. Boretti, Enrico Mattarelli, Giuseppe Cantore, 1999 .

A Lumped Parameter Approach for Simulation of ICE Cooling Systems

Carlo Alberto Rinaldini, Fabrizio Paltrinieri, Giuseppe Cantore, 2009 .

Gas Turbine Cycle Modeling Oriented to Component Performance Evaluation from Limited Design or test Data

R. Bettocchi, Pier Ruggero Spina, Giuseppe Cantore, 1993 .

SI2-3: Development and Application of Gasoline/EtOH Combustion Mechanism : Modeling of Direct Injection Ethanol Boosted Gasoline Engine(SI: Spark-Ignition Engine Combustion,General Session Papers)

Carlo Alberto Rinaldini, Valeri Golovitchev, Giuseppe Cantore, 2008 .

A RANS-Based CFD Model to Predict the Statistical Occurrence of Knock in Spark-Ignition Engines

Sebastiano Breda, Alessandro D'Adamo, Stefano Fontanesi, 2016 .

Thermodynamic and Economic Analysis on Geothermal Integrated Combined-Cycle Power Plants

R. Bettocchi, Giuseppe Cantore, G. Negri di Montenegro, 1992 .

Numerical analysis of the lateral forces acting on spools of hydraulic components.

Massimo Borghi, Massimo Milani, Giuseppe Cantore, 1998 .

Large-Scale CFD Approach for Spray Combustion Modelling in Compression-Ignited Engines

Valeri Golovitchev, Giuseppe Cantore, Jonas Gustavsson, 2005 .

Numerical Study of Volumetric Efficiencies in a High Speed, Four Valve, Four Cylinder, Spark Ignition Engine

Alberto Boretti, Massimo Borghi, Giuseppe Cantore, 1994 .

A Methodology for In-Cylinder Flow Field Evaluation in a Low Stroke-to-Bore SI Engine

Gian Marco Bianchi, Enrico Mattarelli, Stefano Fontanesi, 2002 .

Integrated In-Cylinder/CHT Analysis for the Prediction of Abnormal Combustion Occurrence in Gasoline Engines

Alessandro D'Adamo, Stefano Fontanesi, Giuseppe Cantore, 2014 .

Validation of a combined CFD/FEM methodology for the evaluation of thermal load acting on aluminum alloy pistons through hardness measurements in internal combustion engines

Gian Marco Bianchi, Claudio Forte, Matteo Giacopini, 2013 .

Numerical analysis of the influence of the stroke to bore ratio on tumble breakdown

Gian Marco Bianchi, Giuseppe Cantore, L. Sassi, 1999 .

LES Modelling of Spark-Ignition Cycle-to-Cycle Variability on a Highly Downsized DISI Engine

Sebastiano Breda, Alessandro D'Adamo, Stefano Fontanesi, 2015 .

CFD-3D Multi-Cycle Analysis on a New 2-Stroke HSDI Diesel Engine

Enrico Mattarelli, Stefano Fontanesi, Giuseppe Cantore, 2009 .

Validation of a Sparse Analytical Jacobian Chemistry Solver for Heavy-Duty Diesel Engine Simulations with Comprehensive Reaction Mechanisms

Rolf D. Reitz, Giuseppe Cantore, Emanuele Galligani, 2012 .