Frank M. Johannes

发表

Area Minimisation of IC Power/Ground Nets by Topology Optimisation

Karl-Heinz Erhard, Frank M. Johannes, 1991, VLSI.

Kraftwerk2—A Fast Force-Directed Quadratic Placement Approach Using an Accurate Net Model

Ulf Schlichtmann, Peter Spindler, Frank M. Johannes, 2008, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems.

PHIroute: A parallel hierarchical sea-of-gates router

Kurt Antreich, Frank M. Johannes, Henning Spruth, 1994, Proceedings of IEEE International Symposium on Circuits and Systems - ISCAS '94.

Combining technology mapping with post-placement resynthesis for performance optimization

Frank M. Johannes, Aiguo Lu, Hans Eisenmann, 1998, Proceedings International Conference on Computer Design. VLSI in Computers and Processors (Cat. No.98CB36273).

On the Relative Placement and the Transportation Problem for Standard-Cell Layout

Frank M. Johannes, Knut M. Just, Jürgen M. Kleinhans, 1986, 23rd ACM/IEEE Design Automation Conference.

Power/ground networks in VLSI: are general graphs better than trees?

Karl-Heinz Erhard, Frank M. Johannes, 1992, Integr..

Performance optimization by interacting netlist transformations andplacement

Frank M. Johannes, Bernhard M. Riess, Guenter Stenz, 2000, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

Analogue placement using guided enumeration

Frank M. Johannes, Tobias H. Abthoff, 1995, Int. J. Circuit Theory Appl..

Generic global placement and floorplanning

Frank M. Johannes, Hans Eisenmann, F. Johannes, 1998, Proceedings 1998 Design and Automation Conference. 35th DAC. (Cat. No.98CH36175).

Quadratic placement using an improved timing model

Frank M. Johannes, Bernd Obermeier, 2004, Proceedings. 41st Design Automation Conference, 2004..

Architectures for Parallel Slicing Enumeration in VLSI Layout

Frank M. Johannes, Henning Spruth, 1993, Parallel Computer Architectures.

Technology mapping for minimizing gate and routing area

Frank M. Johannes, Aiguo Lu, Guenter Stenz, 1998, Proceedings Design, Automation and Test in Europe.

Timing driven placement in interaction with netlist transformations

Frank M. Johannes, Bernhard M. Riess, Guenter Stenz, 1997, ISPD '97.

Abacus: fast legalization of standard cell circuits with minimal movement

Ulf Schlichtmann, Peter Spindler, Frank M. Johannes, 2008, ISPD '08.

Performance-directed retiming for FPGAs using post-placement delay information

Klaus Eckl, Frank M. Johannes, Ulrich Seidl, 2003, 2003 Design, Automation and Test in Europe Conference and Exhibition.

Partitioning Very Large Circuits Using Analytical Placement Techniques

Konrad Doll, Frank M. Johannes, Bernhard M. Riess, 1994, 31st Design Automation Conference.

Kraftwerk: A Fast and Robust Quadratic Placer Using an Exact Linear Net Model

Peter Spindler, Frank M. Johannes, 2007, Modern Circuit Placement.

Deterministic analog circuit placement using hierarchically bounded enumeration and enhanced shape functions

Ulf Schlichtmann, Helmut E. Graeb, Frank M. Johannes, 2008, 2008 IEEE/ACM International Conference on Computer-Aided Design.

Analytical placement: a linear or a quadratic objective function?

Konrad Doll, Georg Sigl, Frank M. Johannes, 1991, 28th ACM/IEEE Design Automation Conference.

GORDIAN: VLSI placement by quadratic programming and slicing optimization

Georg Sigl, Kurt Antreich, Frank M. Johannes, 1991, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

Kraftwerk: a versatile placement approach

Frank M. Johannes, Bernd Obermeier, Hans Ranke, 2005, ISPD '05.

Temperature-aware global placement

Frank M. Johannes, Bernd Obermeier, 2004, ASP-DAC 2004: Asia and South Pacific Design Automation Conference 2004 (IEEE Cat. No.04EX753).

GORDIAN: a new global optimization/rectangle dissection method for cell placement

Georg Sigl, Frank M. Johannes, Jürgen M. Kleinhans, 1988, [1988] IEEE International Conference on Computer-Aided Design (ICCAD-89) Digest of Technical Papers.

Iterative placement improvement by network flow methods

Konrad Doll, Kurt Antreich, Frank M. Johannes, 1994, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

Accurate net models for placement improvement by network flow methods

Konrad Doll, Georg Sigl, Frank M. Johannes, 1992, ICCAD.

Partitioning of VLSI circuits and systems

Frank M. Johannes, 1996, DAC '96.

Temperature-aware global placement

Frank M. Johannes, Bernd Obermeier, 2004 .

TINA: analog placement using enumerative techniques capable of optimizing both area and net length

Frank M. Johannes, Tobias H. Abthoff, F. Johannes, 1996, Proceedings EURO-DAC '96. European Design Automation Conference with EURO-VHDL '96 and Exhibition.

Parallel routing of VLSI circuits based on net independency

Frank M. Johannes, Henning Spruth, F. Johannes, 1994, Proceedings of 8th International Parallel Processing Symposium.

DOMINO: Deterministic Placement Improvement with Hill-Climbing Capabilities

Konrad Doll, Georg Sigl, Frank M. Johannes, 1991, Conference on Advanced Research in VLSI.

Fast and Accurate Routing Demand Estimation for Efficient Routability-driven Placement

Peter Spindler, Frank M. Johannes, F. Johannes, 2007, 2007 Design, Automation & Test in Europe Conference & Exhibition.