Cheng Shao

发表

MECHANISM ANALYSIS OF PITTING ATTACK DAMAGE FOR BLADES OF 300MW STEAM TURBINE AND PREVENTIVE MEASURES THEREOF

Cheng Shao, 2003 .

A study on the algorithm of helium speech enhancement

Cheng Shao, Cheng Shao, 2004 .

Pattern recognition of chatter gestation based on SVM — HMM method

Cheng Shao, Qiang Shao, Guan LiNa, 2009, 2009 IEEE International Conference on Automation and Logistics.

Application of multivariable technique in temperature control of reheating furnaces

Tianyou Chai, Cheng Shao, Zhongjie Wang, 1999, Proceedings of the 1999 IEEE International Conference on Control Applications (Cat. No.99CH36328).

An adaptive impedance controller for robot manipulators in task space

Tianyou Chai, Cheng Shao, Weimin Xu, 1996, Proceedings of 35th IEEE Conference on Decision and Control.

Multi-Objective Optimization for EGCS Using Improved PSO Algorithm

Cheng Shao, Zhenshan Yang, Guizhi Li, 2007, 2007 American Control Conference.

A strip thickness prediction method of hot rolling based on D_S information reconstruction

Li Zhang, Cheng Shao, Li-jie Sun, 2015 .

Force and contact transient control for robot manipulators with robustness enhancement

Tianyou Chai, Cheng Shao, Weimin Xu, 1997, Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).

Soft sensing modelling based on optimal selection of secondary variables and its application

Qi Li, Cheng Shao, 2009, Int. J. Autom. Comput..

Adaptive control of nonlinear non-minimum phase systems using neural networks

Tianyou Chai, Cheng Shao, Heng Yue, 1997, Proceedings of the 36th IEEE Conference on Decision and Control.

A synthetic approach for control of intermittent wind tunnel

Tianyou Chai, Cheng Shao, Guijun Zhang, 1997, Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).

Novel hybrid sliding-mode controller for direct torque control induction motor drives

Cheng Shao, Qinghui Wu, 2006, 2006 American Control Conference.

A Robust Iterative Learning Control with Neural Networks for Robot

Cheng Shao, Furong Gao, Juan Nie, 2004 .

Hybrid optimization setpoint strategy for slab reheating furnace temperature

Tianyou Chai, Cheng Shao, Zhongjie Wang, 1999, Proceedings of the 1999 American Control Conference (Cat. No. 99CH36251).

Secondary-wiring design characteristics of 35 kV integrated automation substation in AC operation system

Cheng Shao, 2004 .

A Torque Control Scheme of Induction Motor in Hybrid Electric Vehicle

Yan Liu, Cheng Shao, 2006, 2006 SICE-ICASE International Joint Conference.

Intelligent track guiding controller—the revolution of PID

Yang Yang, Cheng Shao, Shuanghe Yu, 2008, 2008 6th IEEE International Conference on Industrial Informatics.

Interleaving Converters Based on One-cycle Control Current Sharing Technique

Cheng Shao, 2002 .

Non-Intrusive Debugging Methods of TTCN-3

Cheng Shao, 2012 .

Evolving Neural Network Classifiers and Feature Subset Using Artificial Fish Swarm

Yong Gan, Cheng Shao, Junman Sun, 2006, 2006 International Conference on Mechatronics and Automation.

Three-phase high voltage power supply design for electrostatic precipitator based on phase sequence self-adaption and redundant spark detection

Cheng Shao, Xiaofang Wang, Zhuohan Li, 2011, 2011 3rd International Conference on Awareness Science and Technology (iCAST).

Energy efficiency evaluation based on DEA integrated factor analysis in ethylene production

Cheng Shao, Li Zhu, Shixin Gong, 2017 .

Neural network based adaptive predictive control algorithm of nonlinear non-minimum phase systems

Tianyou Chai, Cheng Shao, Jibril Jiya, 1999, Proceedings of the 1999 American Control Conference (Cat. No. 99CH36251).

Modeling and optimizing of elevator group control system with destination floor guidance

Cheng Shao, Suying Yang, Jianzhe Tai, 2008, 2008 Asia Simulation Conference - 7th International Conference on System Simulation and Scientific Computing.

Identification of nonstationary time series based on SVM-HMM method

Cheng Shao, Qiang Shao, Changjian Feng, 2008, 2008 IEEE International Conference on Service Operations and Logistics, and Informatics.

ITERATIVE LEARNING CONTROL SCHEME WITH GLOBAL CONVERGENCE FOR SAMPLED NONLINEAR SYSTEMS

Cheng Shao, Yu Han, Guangwei Xu, 2015 .

Robust Stability of a Modified Clarke-Gawthrop Self-Tuning Controller

Cheng Shao, Xing Yuan Gu, 1993 .

Sensorless torque control scheme of induction motor for hybrid electric vehicle

Cheng Shao, Yan Liu, 2007 .

The design of a hybrid output feedback controller for an uncertain delay system with actuator failures based on the switching method

Cheng Shao, Limin Wang, 2010 .

Multi-level and multi-granularity energy efficiency diagnosis scheme for ethylene production process

Cheng Shao, Li Zhu, Shixin Gong, 2019 .

Energy efficiency evaluation in ethylene production process with respect to operation classification

Cheng Shao, Li Zhu, Shixin Gong, 2017 .

Design of an Adaptive Bilinear Control Algorithm for a Class of Combustion Process

Cheng Shao, Tian You Chai, Jibril Jiya, 1998 .

Comparison of PID and PPI Design Techniques for a Process with Time Delay

Tianyou Chai, Cheng Shao, Jibril Jiya, 1999 .

Adaptive Single Neuron PID Control with Fuzzy and Self-Tuning in Networked Control Systems

Cheng Shao, Hai Chen Yu, De Sheng Zhou, 2012 .

An MRAS method for sensorless control of induction motor over a wide speed range

Cheng Shao, Zhanguo Xu, Dongju Feng, 2011 .

Robust PI based set-point learning control for batch processes subject to time-varying uncertainties and load disturbance

Tao Liu, Cheng Shao, Xue Z. Wang, 2014 .

MLNMF: multi-label learning based on non-negative matrix factorisation

Yu Han, Weiwei Deng, Cheng Shao, 2018 .

Robust iterative learning control with applications to injection molding process

Cheng Shao, Furong Gao, Yi Yang, 2001 .

Tracking Control of Autonomous Underwater Vehicles with Internal Moving Mass

Cheng Shao, Song Bao-wei, Li Jia-wang, 2008 .

Ethylene cracking furnace TOPSIS energy efficiency evaluation method based on dynamic energy efficiency baselines

Cheng Shao, Li Zhu, Di Meng, 2018 .

Estimation of Distillation Compositions Using Sensitivity Matrix Analysis and Kernel Ridge Regression

Cheng Shao, Qi Li, 2008 .

HSIC PID Controller and Its Application

Cheng Shao, Siyuan Wang, Feiyu Wang, 2006, 2006 6th World Congress on Intelligent Control and Automation.

Dynamic tracking prediction control of exit strip thickness based on improved fractal

Li Zhang, Cheng Shao, Li-jie Sun, 2017 .

A new method of flatness control in cold rolling process

Tianyou Chai, Cheng Shao, Junfei Qiao, 1998, Proceedings of the 1998 American Control Conference. ACC (IEEE Cat. No.98CH36207).

Research of compensation algorithm for network time-delay based on multi-model switch

Cheng Shao, Weiguo Shi, Cheng Shao, 2010, 2010 2nd International Conference on Advanced Computer Control.

A Local Pursuit Strategy for Bio-Inspired Optimal Control with Partially-Constrained Final State

Cheng Shao, Dimitrios Hristu-Varsakelis, 2005 .

Energy efficiency optimization of ethylene production process with respect to a novel FLPEM‐based material‐product nexus

Cheng Shao, Li Zhu, Shixin Gong, 2019, International Journal of Energy Research.

Heave Compensation Control for Ocean Vessel

Cheng Shao, Meng Wang, 2013 .

Batch reactor temperature control based on DMC-optimization PID

Cheng Shao, Li Zhu, Tong Song, 2015, 2015 IEEE International Conference on Cyber Technology in Automation, Control, and Intelligent Systems (CYBER).

Centrifugal compressor surge control using nonlinear model predictive control based on LS-SVM

Cheng Shao, Yu Han, Chuanxin Wang, 2010, 2010 3rd International Symposium on Systems and Control in Aeronautics and Astronautics.

Optimal iterative learning control with uncertain initializations and disturbances

Fuli Wang, Cheng Shao, Furong Gao, 2001 .

A new method for independently tuning PID parameters

Tianyou Chai, Cheng Shao, Guijun Zhang, 1996, Proceedings of 35th IEEE Conference on Decision and Control.

Mining Classification Rule with Artificial Fish Swarm

Cheng Shao, Meijuan Li, Junman Sun, 2006, 2006 6th World Congress on Intelligent Control and Automation.

Two-tier control structure design methodology applied to heat exchanger networks

Cheng Shao, Jian Du, Siwen Gu, 2021, Chinese Journal of Chemical Engineering.

Coordinated optimization control of shield machine based on dynamic fuzzy neural network direct inverse control

Cheng Shao, Xuanyu Liu, Qiumei Cong, 2020, Trans. Inst. Meas. Control.

Two-level comprehensive energy-efficiency quantitative diagnosis scheme for ethylene-cracking furnace with multi-working-condition of fault and exception operation

Cheng Shao, Di Meng, Li Zhu, 2021, Energy.

Centrifugal compressor surge control using nonlinear model predictive control based on LS-SVM

Cheng Shao, Chuanxin Wang, Yu Han, 2010, 2010 3rd International Symposium on Systems and Control in Aeronautics and Astronautics.

Indirect adaptive control for a class of unknown nonlinear systems based on LS-SVM

Cheng Shao, Chunli Xie, Juan Wang, 2010, The 2010 IEEE International Conference on Information and Automation.

MULTIPLE-INPUT MULTIPLE-OUTPUT SOFT SENSORS BASED ON KPCA AND MKLS-SVM FOR QUALITY PREDICTION IN ATMOSPHERIC DISTILLATION COLUMN

Cheng Shao, Qun Du, Wei Ba, 2012 .

Designing fuzzy inference system based on improved gradient descent method * * This project was supp

Cheng Shao, Cheng Shao, Li-Quan Zhang, 2006 .

A new method for detecting spark in electrostatic precipitation

Cheng Shao, Chongquan Zhong, Yi An, 2011, International Conference on Information Science and Technology.

Feature Extraction from 3D Point Cloud Data Based on Discrete Curves

Cheng Shao, Yi An, Zhuohan Li, 2013 .