Xaver Schuler

发表

Probabilistic Procedure to Evaluate Integrity of Degraded Pipes under Internal Pressure and Bending Moment (M118)

Frank Otremba, Eberhard Roos, Karl-Heinz Herter, 2003 .

Integrity assessment for safety relevant nuclear piping

H. S. Kushwaha, Eberhard Roos, Xaver Schuler, 2014 .

Fracture mechanics evaluation of small diameter piping considering the latest experimental results

Eberhard Roos, Karl-Heinz Herter, Xaver Schuler, 2000 .

Development of a damage mechanics based limit strain concept using an enhanced Rousselier model

Xaver Schuler, Florian Fehringer, Michael Seidenfuß, 2018 .

SHM and Lifetime Management of Industrial Piping Systems

Klaus Kerkhof, Helmut Wenzel, Xaver Schuler, 2009 .

Proposal for an Improved Engineering Fatigue Lifetime Assessment Concept

Jürgen Rudolph, Xaver Schuler, Karl-Heinz Herter, 2016 .

Proof of fatigue strength of nuclear components part II: Numerical fatigue analysis for transient stratification loading considering environmental effects

Eberhard Roos, Karl-Heinz Herter, Xaver Schuler, 2012 .

Experimental Verification of Different Parameters Influencing the Fatigue S/N-Curve

Karl Maile, Eberhard Roos, Karl-Heinz Herter, 2005 .

Assessment of mixed mode crack propagation of crane runway girders subjected to cyclic loading

Eberhard Roos, Xaver Schuler, Stefan Weihe, 2016 .

Guideline for the Assessment of Fatigue Loaded Components in Hydropower Plants

Klaus Schneider, Xaver Schuler, Wolfgang Kofler, 2015, WASSERWIRTSCHAFT.

Extension of fracture mechanics evaluation methods by consideration of multiaxiality of stress state for piping components

U. Eisele, Xaver Schuler, K.-H. Herter, 1995 .

Probabilistic safety assessment of components

Eberhard Roos, Xaver Schuler, G. Wackenhut, 2011 .

Environmental Influences on the Fatigue Assessment of Austenitic and Ferritic Steel Components Including Welds

Jürgen Rudolph, Xaver Schuler, Karl-Heinz Herter, 2014 .

Fatigue Behavior of Nuclear Materials Under Air and Environmental Conditions

Xaver Schuler, Karl-Heinz Herter, Thomas Weissenberg, 2013 .

Numerical Evaluation of Ratchetting Effects on the Deformation and Failure Behaviour of Components

Eberhard Roos, Xaver Schuler, Ludwig Stumpfrock, 2009 .

A CRITICAL PLANE BASED MODEL FOR FATIGUE ASSESSMENT UNDER FIXED AND ROTATING PRINCIPAL DIRECTION LOADING

K. K. Vaze, Xaver Schuler, Vivek Bhasin, 2011 .

Experimental and numerical investigations on limit strains in ductile fracture

Xaver Schuler, Florian Fehringer, Michael Seidenfuß, 2016 .

Fracture mechanics evaluation of cracked components with consideration of multiaxiality of stress state

U. Eisele, Xaver Schuler, D. Blind, 1994 .

Damage Modeling of the Load-Bearing Capacity of Damaged Steam Generator Tubes in Nuclear Power Plants

Xaver Schuler, Michael Seidenfuss, Sarah Gehrlicher, 2013 .

A new concept for steam generator tube integrity assessment

Anton Erhard, Xaver Schuler, F. Otremba, 2012 .

Bewertung von Druckprüfungen mit erhöhtem Prüfdruck bei Müllheizkraftwerken

Xaver Schuler, Karl-Heinz Herter, Ulrich Schirmer, 2010 .

Lifetime management for mechanical systems, structures and components in nuclear power plants

Eberhard Roos, Karl-Heinz Herter, Xaver Schuler, 2006 .

Fracture mechanics safety analysis of components based on fracture mechanics characteristics combined with multiaxiality of the stress state

U. Eisele, Eberhard Roos, Xaver Schuler, 2005 .

Application of Advanced Fatigue Damage Parameters in Comparison With Fatigue Analysis Included in Codes and Standards

Xaver Schuler, Karl-Heinz Herter, Philipp Rettenmeier, 2014 .

Further Development of the Nonlocal Damage Model of Rousselier for the Transition Regime of Fracture Toughness and Different Stress States

Xaver Schuler, Michael Seidenfuss, Sarah Gehrlicher, 2014 .