Takashi Harada

发表

The relationship between common-mode radiation from the ground plane and differential-mode radiation from signal traces on the ground plane

H. Sasaki, Takashi Harada, T. Kuriyama, 2002, 2002 IEEE International Symposium on Electromagnetic Compatibility.

Design and Control of a Parallel Robot for Mold Polishing

Takashi Harada, 2016 .

Durability Evaluation of Geomembrane Liners Using an Indoor Accelerated Exposure Experiment and an Outdoor Exposure Experiment for 10 years: Effects on Durability of the Protective Covering

Takashi Harada, Shigeyoshi Imaizumi, Itaru Nishizaki, 2006 .

Scanning Probe for Coordinate Measurement Using a Translational Parallel Mechanism (Prototyping of the Isotropic Mechanism and Calibration of the Mechanical Parameters)

Ke Dong, Takashi Harada, Kenta Kanamaru, 2012 .

A fast board-power-voltage fluctuation analysis system for chip-package-board Co-design

Shunji Satoh, Masatoshi Ogawa, Takashi Harada, 2005 .

Fast power integrity estimation method by use of LSI power-pin model

Masashi Ogawa, Takashi Harada, Manabu Kusumoto, 2010, 2010 IEEE CPMT Symposium Japan.

A new decoupling technique for suppressing radiated emissions arising from power bus resonance of multilayer PCBs

H. Sasaki, Takashi Harada, Toshihide Kuriyama, 1999, 1999 International Symposium on Electromagnetic Compatibility (IEEE Cat. No.99EX147).

Static and dynamic behavior of lens-type shear panel dampers for highway bridge bearing

Feng Chen, Takashi Harada, Tatsumasa Takaku, 2010 .

Method for controlling the power supply in a multi-process Operating Environment

Shigeki Mori, Kazuhiro Matsubayashi, Takashi Harada, 1995 .

EMI Mechanism and Modeling of Printed Circuit Board

Takashi Harada, 2003 .

Optical ISL transmitter design that uses a high-power LD amplifier

Masayuki Fujise, Takashi Harada, Mitsuo Nohara, 1991, Photonics West - Lasers and Applications in Science and Engineering.

Investigation on power distribution plane resonance in multilayer printed circuit boards using a transmission-line model

Yoshio Kami, Takashi Harada, H. Sasaki, 1999, 1999 International Symposium on Electromagnetic Compatibility (IEEE Cat. No.99EX147).

A new VLSI decoupling circuit for suppressing radiated emissions from multilayer printed circuit boards

H. Sasaki, Takashi Harada, Toshihide Kuriyama, 2000, IEEE International Symposium on Electromagnetic Compatibility. Symposium Record (Cat. No.00CH37016).

EVALUATION OF EXPANSION BEHAVIOR OF BARRIER SHEET BY USE OF FOIL STRAIN GAUGE

Takashi Harada, Shigeyoshi Imaizumi, Tetsuya Kashiwagi, 2005 .

An investigation of the effect of grounding pads on power bus resonance characteristics

Takashi Harada, Xinbo He, Naoki Kobayashi, 2009, 2009 IEEE International Symposium on Electromagnetic Compatibility.

Open stub electromagnetic bandgap structure for 2.4/5.2 GHz dual-band suppression of power plane noise

Takashi Harada, Yoshiaki Kasahara, Hiroshi Toyao, 2011, 2011 IEEE Electrical Design of Advanced Packaging and Systems Symposium (EDAPS).

Main Factors Affecting Wear Comfort on the Field Tests

Takashi Harada, 1983 .

Measurement of Fabric Hand by Sensory Method and Inspection on its Effectiveness for Worsted Woven Fabrics

Takashi Harada, Minoru Saito, Tatsuki Matsuo, 1995 .

Human Behavior in Machining Operation. Relation of Fatigue with Operational and Physiological Information.

Hideo Kato, Fan Wang, Takashi Harada, 2002 .

Trend of Fluid Analysis in a New CFD, Moving Particle Semi-implicit Method

Takashi Harada, Kazuo Muto, Takashi Natori, 2013 .

Analysis of Multilayered Power-Distribution Planes with Via Structures Using SPICE

Naoki Kobayashi, Takashi Harada, Takahiro Yaguchi, 2005 .

Development of EMI Rule Check Tool for Supporting Printed Circuit Board Layout Design

Takashi Harada, Manabu Kusumoto, Takahiro Yaguchi, 2011 .

MODEL TESTS ON THE TENSILE STRAIN AND THE TENSILE FORCE OF BARRIER SHEET CAUSED BY DIFFERENTIAL SETTLEMENT OF SUBGROUND

Takashi Harada, Shigeyoshi Imaizumi, Kazuhito Satsuka, 2010 .

1P1-F10 Development of Rehabilitation Robot for Legs using Linear Motor : Measurement of legs impedance

Takashi Harada, Takurou Mizuguchi, 2010 .

On-Machine Cutting Edge Profile Measurement for Micro Milling Tool (1st Report, Laser Diffraction Gauge Method and its Verifications)

Takashi Miyoshi, Yasuhiro Takaya, Takashi Harada, 2004 .

Trends in Development of Speciality Fiber & Textiles

Takashi Harada, 1998 .

Time‐domain magnetic field waveform measurement near printed circuit boards

Takashi Harada, Hideki Sasaki, Eiji Hankui, 1999 .

Development of On-Machine Measurement System for Axis Motion Behavior of Rotational Tools with Various Shapes (Consideration of Measurement Principle and Error Factors)

Takashi Harada, Shinji Shimizu, Haruhisa Sakamoto, 2013 .

Development of Electrode Structure for High Performance Fuel Cell Using CAE

Takashi Harada, Takaji Inamuro, Shi-aki Hyodo, 2010 .

On-Machine Cutting Edge Profile Measurement for Micro Milling Tool (2nd Report, Micro Endmill (.PHI.300.MU.m) Wear Measurement and Evaluation)

Takashi Miyoshi, Yasuhiro Takaya, Takashi Harada, 2006 .

Radiated emission arising from power distribution in multilayer printed circuit boards

Yoshio Kami, H. Sasaki, Takashi Harada, 1997, IEEE 1997, EMC, Austin Style. IEEE 1997 International Symposium on Electromagnetic Compatibility. Symposium Record (Cat. No.97CH36113).

Investigation on Radiated Emission Characteristics of Multilayer Printed Circuit Boards

Yoshio Kami, Takashi Harada, Takashi Harada, 1996 .

Time Domain Magnetic Field Waveform Measurement near Printed Circuit Boards

Takashi Harada, Hideki Sasaki, Eiji Hankui, 1997 .