Salima Bouvier

发表

TAB Bonded SSD Module for the STAR and ALICE Trackers

L. Arnold, J. Baudot, J. R. Lutz, 1999 .

Application of a dislocation based model for Interstitial Free (IF) steels to typical stamping simulations

Farid Abed-Meraim, Tudor Balan, Salima Bouvier, 2010 .

Electrical characterization of ALICE128C: A low-power CMOS ASIC for the readout of silicon strip detectors

Claude Colledani, Luc Hebrard, Yann Hu, 1998 .

Selection and iden- tification of elastoplastic models for the materials used in the benchmarks, 18-Months Progress Report of the Digital Die Design Systems (3DS) Project

Mihaela Banu, Cristian Teodosiu, Salima Bouvier, 2001 .

Analysis of Texture Evolution and hardening Behavior during Deep drawing with an improved mixed type FEM Element

Laurent Duchene, Anne Habraken, Salima Bouvier, 2005 .

Full-field measurement technique and its application to the analysis of materials behaviour under plane strain mode

J. L. Dournaux, Pierre Vacher, Salima Bouvier, 2009 .

Deep Drawing Simulations With Different Polycrystalline Models

Laurent Duchene, Anne Habraken, Salima Bouvier, 2004 .

Characterization of the microstructure evolution and subsurface hardness of graded stainless steel produced by different mechanical or thermochemical surface treatments

Salima Bouvier, S. Bouvier, J. Marteau, 2016 .

Simple shear tests: Experimental techniques and characterization of the plastic anisotropy of rolled sheets at large strains

Cristian Teodosiu, Salima Bouvier, S. Bouvier, 2006 .

Relation between roughness and processing conditions of AISI 316L stainless steel treated by ultrasonic shot peening

Maxence Bigerelle, Pierre-Emmanuel Mazeran, Salima Bouvier, 2015 .

Numerical investigation and experimental validation of a plasticity model for sheet steel forming

Farid Abed-Meraim, Tudor Balan, Salima Bouvier, 2012 .

Non-quadratic anisotropic potentials based on linear transformation of plastic strain rate

Frédéric Barlat, Kwansoo Chung, Tudor Balan, 2007 .