Ninshu Ma

发表

Numerical Analysis of the Straightening Process of Thin Plate Structures by Elastic FEM based on the Inherent Strain Method

Hisashi Serizawa, Juan Blandon, Adan Vega, 2012 .

Springback Simulation and Compensation for High Strength Parts Using JSTAMP

Ninshu Ma, Terumasa Shindo, Nobuhiko Sugitomo, 2011 .

New Challenge toward Digitalization and Virtual Manufacturing

Ninshu Ma, 2017 .

An accelerated explicit method with GPU parallel computing for thermal stress and welding deformation of large structure models

Ninshu Ma, N. Ma, 2016 .

Strategic Simulation Analyses for Manufacturing Problems Related to Welding

Yukio Ueda, Hidekazu Murakawa, Ninshu Ma, 2013 .

A dual-mesh method for efficient thermal stress analysis of large-scale welded structures

Hui Huang, Zhili Feng, Ninshu Ma, 2019, The International Journal of Advanced Manufacturing Technology.

Q&A for FEM Programs

Yukio Ueda, Hidekazu Murakawa, Ninshu Ma, 2013 .

Report on The 3rd International Conference on Advanced High Strength Steel and Press Hardening

Ninshu Ma, Yisheng Zhang, 2017 .

Optimal Simulation of Multi-Stage Tube Hydroforming

Ninshu Ma, Nobuhiko Sugitomo, Masahito Harada, 2001 .

Simulation Procedures for Welding Heat Conduction, Welding Deformation, and Residual Stresses Using the FEM Programs Provided on the Companion Website

Yukio Ueda, Ninshu Ma, Hidekazu Murakawa, 2013 .

Finite Element Analysis of Welding Distortion in a Large Thin-plate Panel Structure

Ninshu Ma, Hidekazu Murakawa, Dean Deng, 2011 .

Effect of jig constraint position and pitch on welding deformation

Hidekazu Murakawa, Hui Huang, Ninshu Ma, 2015 .

Numerical and experimental study on nugget formation in resistance spot welding for three pieces of high strength steel sheets

Hidekazu Murakawa, Ninshu Ma, H. Murakawa, 2010 .

Impact Analysis of Aluminum-Fiber Composite Lamina

Ninshu Ma, Hidekazu Murakawa, Yehia A. Abdel-Nasser, 2015 .

Nonlinear friction model for servo press simulation

Ninshu Ma, Nobuhiko Sugitomo, Tetsuo Naka, 2013 .

Fast Prediction of Welding Assembly Deformation using Inherent Strain Method and Optimal Design of Welding Sequence

Ninshu Ma, Sunao Tokura, Isaku Chimura, 2012 .

An Optimization Study of Hot Stamping Operation (Numisheet 2008 BM3)

Ninshu Ma, Ron Averill, Yuko Watanabe, 2010 .

SPRINGBACK PREDICTION BY YOSHIDA-UEMORI MODEL AND COMPENSATION OF TOOL SURFACE USING JSTAMP

Ninshu Ma, Yuko Watanabe, Yasuyoshi Umezu, 2008 .

Introduction to Measurement and Prediction of Residual Stresses with the Help of Inherent Strains

Yukio Ueda, Ninshu Ma, Hidekazu Murakawa, 2012 .

An Optimization Study of Hot Stamping Operation

Ninshu Ma, Ron Averill, Yuko Watanabe, 2010 .

Development of JSTAMP-Works/NV and HYSTAMP for Multipurpose Multistage Sheet Metal Forming Simulation

Ninshu Ma, Yuko Watanabe, Yasuyoshi Umezu, 2005 .

Advanced Mesh-Based and Particle-Based Numerical Methods for Engineering and Applied Mathematics Problems

Ninshu Ma, Leevan Ling, Marc Alexander Schweitzer, 2017 .

Computational stoning method for surface defect detection

Xinhai Zhu, Ninshu Ma, 2013 .

Press Forming Simulation of Tailor Welded Blanks

Ninshu Ma, Takahiko Hisamori, 2013 .

Isogeometric Analysis and Bayesian Optimization on Efficient Weld Geometry Design for Remarkable Stress Concentration Reduction

Ninshu Ma, Thein Lin Aung, 2021, Comput. Aided Des..

Development of FEA-ANN-Integrated Approach for Process Optimization of Coaxial One-Side Resistance Spot Welding of Al5052 and CFRP

Ninshu Ma, Sendong Ren, Yunwu Ma, 2021, Journal of Manufacturing Science and Engineering.

Advanced Structural Health Monitoring Method by Integrated Isogeometric Analysis and Distributed Fiber Optic Sensing

Ninshu Ma, Kinzo Kishida, Artur Guzik, 2021, Sensors.

Concept of inherent strain, inherent stress, inherent deformation and inherent force for prediction of welding distortion and residual stress

Ninshu Ma, Hidekazu Murakawa, Dean Deng, 2010 .

Measurement of welding residual stresses of reactor vessel by inherent strain method: measurement of residual stresses of pipe–plate penetration joint

Ninshu Ma, Keiji Nakacho, Naoki Ogawa, 2007 .

Dynamic Explicit FEM and Simulation on Sheet Metal Forming

Ninshu Ma, Nobuhiko Sugitomo, 2006 .

Residual Stress Measurement of Large-Bore Stainless Steel Pipe with Butt-Welded Joint by Inherent Strain Method

Akira Maekawa, Ninshu Ma, Keiji Nakacho, 2010 .

Shear strength of CMT brazed lap joints between aluminum and zinc-coated steel

Ninshu Ma, Hidekazu Murakawa, Yongping Lei, 2013 .

Measurement of residual stress in arc welded lap joints by cosα X-ray diffraction method

Ninshu Ma, Hidekazu Murakawa, Yongping Lei, 2017 .

Investigation of welding residual stress in flash-butt joint of U71Mn rail steel by numerical simulation and experiment

Jiluan Pan, Hui Huang, Ninshu Ma, 2015 .

Finite Element Analysis and In-Situ Measurement of Out-of-Plane Distortion in Thin Plate TIG Welding

Zhili Feng, Ninshu Ma, Zhili Feng, 2019, Materials.

Residual Stresses in Flash Butt Welded Rail

Ninshu Ma, Hidekazu Murakawa, Yuebo Qu, 2011 .

Analysis of influence of initial gap of laser-arc hybrid butt welds on inherent strain and welding deformation of a pipe structure

Hui Huang, Ninshu Ma, Hongbo Xia, 2016 .

Residual stress measurement in an extra thick multi-pass weld using initial stress integrated inherent strain method

Ninshu Ma, Jeong-Ung Park, Jaehyouk Choi, 2014 .

Residual stresses in laser-arc hybrid welded butt-joint with different energy ratios

Hui Huang, Ninshu Ma, Hidekazu Murakawa, 2015 .

Application of explicit FEM to welding deformation

Ninshu Ma, Yasuyoshi Umezu, Y. Umezu, 2009 .

Analysis and Prediction of Parallel Effect on Inherent Deformation during the Line Heating Process

Adan Vega, Ninshu Ma, Hidekazu Murakawa, 2013 .

Iterative substructure method employing concept of inherent strain for large-scale welding problems

Hui Huang, Ninshu Ma, Hidekazu Murakawa, 2014, Welding in the World.

Efficient Simulation of Welding Distortion in Large Structures and Its Reduction by Jig Constraints

Hui Huang, Ninshu Ma, N. Ma, 2017, Journal of Materials Engineering and Performance.

Recent research on welding distortion prediction in thin plate fabrication by means of elastic FE computation

Ninshu Ma, Hidekazu Murakawa, Jiangchao Wang, 2016 .

Applications of inherent strain and interface element to simulation of welding deformation in thin plate structures

Ninshu Ma, Hidekazu Murakawa, Jiangchao Wang, 2012 .

Prediction and measurement of welding distortion of a spherical structure assembled from multi thin plates

Ninshu Ma, Hidekazu Murakawa, Shijian Yuan, 2011 .