Daniel Rittel

发表

Experiments and modeling of ballistic penetration using an energy failure criterion

M. Dolinski, Daniel Rittel, D. Rittel, 2015 .

Scaling the response of circular plates subjected to large and close-range spherical explosions. Part II: Buried charges

Daniel Rittel, A. Neuberger, S. Peles, 2007 .

On testing of charpy specimens using the one-point bend impact technique

Daniel Rittel, André Pineau, J. Clisson, 2002 .

Impact Fracture of Screws for Disassembly

Daniel Rittel, Eyal Zussman, D. Studny, 1999 .

Springback of circular clamped armor steel plates subjected to spherical air-blast loading

Daniel Rittel, A. Neuberger, S. Peles, 2009 .

Flaw detection in metals by the ACPD technique: Theory and experiments

Daniel Rittel, H. Saguy, D. Rittel, 2007 .

INVESTIGATION OF ADIABATIC SHEAR BANDS IN THICK‐WALLED CYLINDERS COLLAPSED BY ELECTRO‐MAGNETIC DRIVING FORCES

Daniel Rittel, A. Rikanati, Z. Lovinger, 2009 .

A hybrid experimental–numerical investigation of dynamic shear fracture

Daniel Rittel, D. Rittel, 2005 .

Scaling the response of circular plates subjected to large and close-range spherical explosions. Part I: Air-blast loading

Daniel Rittel, A. Neuberger, S. Peles, 2007 .

Determination of the Johnson–Cook Material Parameters Using the SCS Specimen

Daniel Rittel, A. Dorogoy, D. Rittel, 2009 .

Fatigue of Dental Implants: Facts and Fallacies

Daniel Rittel, Keren Shemtov-Yona, D. Rittel, 2016, Dentistry journal.

Engineering Dental Implants

Daniel Rittel, Keren Shemtov-Yona, Raoof Korabi, 2017, Current Oral Health Reports.

A method for dynamic fracture toughness determination using short beams

Daniel Rittel, G. Weisbrod, D. Rittel, 2000 .

Experimental crack identification using electrical impedance tomography

Daniel Rittel, Izhak Bucher, R. Lazarovitch, 2002 .

Dynamic testing of materials: Selected topics

Daniel Rittel, D. Rittel, 2014 .

A new approach to the experimental determination of the dynamic stress intensity factor

Hubert Maigre, Daniel Rittel, H. D. Bui, 1992 .

Modeling the effect of osseointegration on dental implant pullout and torque removal tests.

Daniel Rittel, Keren Shemtov-Yona, D. Rittel, 2018, Clinical implant dentistry and related research.

On the conversion of plastic work to heat during high strain rate deformation of glassy polymers

Daniel Rittel, D. Rittel, 1999 .

Static and dynamic flexural strength of 99.5% alumina: Relation to porosity

Daniel Rittel, D. Rittel, A. Belenky, 2012 .

An investigation of dynamic crack initiation in PMMA

Hubert Maigre, Daniel Rittel, D. Rittel, 1996 .

A Note on the Dynamic Failure of PMMA

Daniel Rittel, D. Rittel, 2000 .

Alternating current flow in internally flawed conductors: A tomographic analysis

Daniel Rittel, H. Saguy, D. Rittel, 2006 .

Experimental investigation of transient thermoplastic effects in dynamic fracture

Daniel Rittel, D. Rittel, 1998 .

Theoretical and experimental analysis of longitudinal wave propagation in cylindrical viscoelastic rods

Daniel Rittel, A. Benatar, D. Rittel, 2003 .

Large strain mechanical behavior of 1018 cold-rolled steel over a wide range of strain rates

G. Ravichandran, Daniel Rittel, M. Vural, 2003 .

Modern topics and challenges in dynamic fracture

Huajian Gao, Brian N. Cox, Daniel Rittel, 2005 .

A shear-compression specimen for large strain testing

G. Ravichandran, Daniel Rittel, G. Ravichandran, 2002 .

A NEW METHOD FOR DYNAMIC FRACTURE TOUGHNESS TESTING

Hubert Maigre, Daniel Rittel, H. D. Bui, 1992 .

On the Testing of the Dynamic Mechanical Properties of Soft Gelatins

Daniel Rittel, D. Rittel, D. Richler, 2014 .

Mixed-mode quantification for dynamic fracture initiation: Application to the compact compression specimen

Hubert Maigre, Daniel Rittel, D. Rittel, 1993 .

Transverse impact of free-free square aluminum beams : An experimental-numerical investigation

Daniel Rittel, A. Dorogoy, D. Rittel, 2008 .

Large Deformation of Nitinol Under Shear Dominant Loading

G. Ravichandran, Kaushik Bhattacharya, Daniel Rittel, 2009 .

Multi-Scale Stereo-Photogrammetry System for Fractographic Analysis Using Scanning Electron Microscopy

Anath Fischer, Daniel Rittel, A. Fischer, 2012 .

Modeling adiabatic shear failure from energy considerations

M. Dolinski, Daniel Rittel, A. Dorogoy, 2010 .

Transient temperature measurement using embedded thermocouples

Daniel Rittel, D. Rittel, 1998 .

3D Reconstruction and Visualization of Microstructure Surfaces from 2D Images

Anath Fischer, Daniel Rittel, A. Fischer, 2007 .

Effect of strain rate on deformation texture in OFHC copper

Abhishek Bhattacharyya, G. Ravichandran, Daniel Rittel, 2005 .

Infrared temperature sensing of mechanically loaded specimens: Thermal analysis

Yoed Rabin, Daniel Rittel, D. Rittel, 2000 .

Bridging thin and thick skin solutions for alternating currents in cracked conductors

Daniel Rittel, H. Saguy, D. Rittel, 2005 .

An analysis of microstructural and thermal softening effects in dynamic necking

Ramón Zaera, José Fernández-Sáez, Daniel Rittel, 2015 .

The respective influence of microstructural and thermal softening on adiabatic shear localization

Daniel Rittel, Shmuel Osovski, D. Rittel, 2013 .

A study of mixed-mode dynamic crack initiation in PMMA

Hubert Maigre, Daniel Rittel, D. Rittel, 1996 .