Said Ahzi

发表

Field-scale Computational Fluid Dynamics applied to wind velocity profiles of photovoltaic plant: Case of the QEERI solar test facility, Doha, Qatar

Nicolas Barth, Benjamin W. Figgis, Ahmed Ennaoui, 2016, 2016 International Renewable and Sustainable Energy Conference (IRSEC).

PV panel single and double diode models: Optimization of the parameters and temperature dependence

Raka Jovanovic, Nicolas Barth, Said Ahzi, 2016 .

An adaptive modelling technique for parameters extraction of photovoltaic devices under varying sunlight and temperature conditions

Nicolas Barth, Said Ahzi, Shahzada Pamir Aly, 2019, Applied Energy.

Polymer composites for the automotive industry: characterisation of the recycling effect on the strain rate sensitivity

Said Ahzi, Nadia Bahlouli, Daniel Pessey, 2008 .

Why is it Important to Model the Performance and Reliability of Photovoltaics Under Qatar's Climate?

Nicolas Barth, Said Ahzi, Ahmed Ennaoui, 2016 .

Using energy balance method to study the thermal behavior of PV panels under time-varying field conditions

Nicolas Barth, Said Ahzi, Shahzada Pamir Aly, 2018 .

A computational analysis of coupled thermal and electrical behavior of PV panels

Nicolas Barth, Said Ahzi, Mohammad A. Khaleel, 2016 .

Novel dry cleaning machine for photovoltaic and solar panels

Nicolas Barth, Said Ahzi, Palanichamy Gandhidasan, 2015, 2015 3rd International Renewable and Sustainable Energy Conference (IRSEC).

Semi-inverse Monte Carlo reconstruction of two-phase heterogeneous material using two-point functions

Dongsheng Li, Majid Baniassadi, Madjid Fathi, 2009 .

Two-dimensional finite difference-based model for coupled irradiation and heat transfer in photovoltaic modules

Nicolas Barth, Said Ahzi, Shahzada Pamir Aly, 2017, Solar Energy Materials and Solar Cells.

Mitigating the effect of heat and dust to enhance solar panels efficiency

Nicolas Barth, Ahmed Ennaoui, Said Ahzi, 2016, 2016 International Renewable and Sustainable Energy Conference (IRSEC).

On the self-consistent modeling of elastic-plastic behavior of polycrystals

Said Ahzi, Alain Molinari, S. Ahzi, 1997 .

Finite elements simulations of thin copper sheets blanking: Study of blanking parameters on sheared edge quality

Said Ahzi, Loïc Daridon, J.P.M. Correia, 2008 .

A statistical approach for the evaluation of mechanical properties of silica/epoxy nanocomposite: Verification by experiments

Said Ahzi, Bohayra Mortazavi, S. Ahzi, 2012 .

Experimental and multiscale modeling of thermal conductivity and elastic properties of PLA/expanded graphite polymer nanocomposites

Said Ahzi, Bohayra Mortazavi, David Chapron, 2013 .

A new smoothed particle hydrodynamics non-Newtonian model for friction stir welding: Process modeling and simulation of microstructure evolution in a magnesium alloy

Alexandre M. Tartakovsky, Moe Khaleel, Said Ahzi, 2013 .

Modeling and validation of the large deformation inelastic response of amorphous polymers over a wide range of temperatures and strain rates

Said Ahzi, Ahmed Makradi, Kenneth S. Vecchio, 2007 .

Review of PV soiling particle mechanics in desert environments

Yves Rémond, Said Ahzi, Ahmed Ennaoui, 2017 .

Crack Growth in Solid Oxide Fuel Cell Materials: From Discrete to Continuum Damage Modeling

Brian J. Koeppel, Ba Nghiep Nguyen, Said Ahzi, 2006 .

Asymmetric rolling of interstitial free steel sheets: microstructural evolution and mechanical properties

Frédéric Barlat, Said Ahzi, José Grácio, 2018 .

On dimensional stabilities: Modeling of the Bonus-Z during the SLS Process

Said Ahzi, Frank W. Paul, Alexandre L . Papadatos, 1997 .

Thickness and chirality effects on tensile behavior of few-layer graphene by molecular dynamics simulations

Yves Rémond, Said Ahzi, Bohayra Mortazavi, 2012 .

Calculation of Two‐Point Correlation Functions

Yves Rémond, Majid Baniassadi, Hamid Garmestani, 2016 .

Three-phase solid oxide fuel cell anode microstructure realization using two-point correlation functions

Xin Sun, Majid Baniassadi, Hamid Garmestani, 2011 .

A simple model to simulate electromagnetic sheet free bulging process

Salim Belouettar, Said Ahzi, J.P.M. Correia, 2008 .

Processing path optimization to achieve desired texture in polycrystalline materials

Hamid Garmestani, Said Ahzi, S. Ahzi, 2007 .

Influence of temperature and strain rate on the mechanical behavior of three amorphous polymers: Characterization and modeling of the compressive yield stress

Said Ahzi, Kenneth S. Vecchio, Fengchun Jiang, 2006 .

Modeling of the effective elastic and thermal properties of glass-ceramic solid oxide fuel cell seal materials

Xin Sun, Hamid Garmestani, Brian J. Koeppel, 2009 .

Thermal conductivity and tensile response of defective graphene: A molecular dynamics study

Said Ahzi, Bohayra Mortazavi, S. Ahzi, 2013 .

Simulation of Texture Evolution during Wire Drawing of BSCCO Superconductors

Said Ahzi, I. Haque, S. Tombat, 2002 .

A model for microstructure evolution in adiabatic shear bands

Said Ahzi, Joy A. Hines, Kenneth S. Vecchio, 1998 .

On the Ability of Structural and Phenomenological Hyperelastic Models to Predict the Mechanical Behavior of Biological Tissues Submitted to Multiaxial Loadings

Yves Rémond, Said Ahzi, Mathieu Nierenberger, 2012 .

Electro-hydraulic forming of sheet metals: Free-forming vs. conical-die forming

Richard W. Davies, Said Ahzi, Ayoub Soulami, 2012 .

Effective conductivity in isotropic heterogeneous media using a strong-contrast statistical continuum theory

Yves Rémond, Hamid Garmestani, Said Ahzi, 2009 .

Modeling of thermal shock-induced damage in a borosilicate glass

Yves Rémond, Said Ahzi, Daniel George, 2010 .

New approximate solution for N-point correlation functions for heterogeneous materials

Yves Rémond, Majid Baniassadi, Hamid Garmestani, 2012 .

Prediction of crack propagation paths in the unit cell of SOFC stacks

Brian J. Koeppel, Said Ahzi, Mohammad A. Khaleel, 2009 .

Statistical continuum theory for the effective conductivity of fiber filled polymer composites: Effect of orientation distribution and aspect ratio

Yves Rémond, Hamid Garmestani, Said Ahzi, 2010 .