Pierre-Yves Manach

发表

Thermo-mechanical forming of a large sling shackle

J. Cochet, S. Thuillier, Pierre-Yves Manach, 2016 .

Multi-stage hot forming process of shackles

Sandrine Thuillier, Pierre-Yves Manach, Julien Cochet, 2015 .

Surface Defects in Sheet Metal Forming

Sandrine Thuillier, Pierre-Yves Manach, Alban Le Port, 2011 .

Surface Defects in Sheet Metal Forming: a Simulative Laboratory Device and Comparison with FE Analysis

Sandrine Thuillier, Pierre-Yves Manach, Alban Le Port, 2011 .

Investigation of the key process parameters in the hot forming of a shackle

J. Cochet, Pierre-Yves Manach, N. Decultot, 2019, The International Journal of Advanced Manufacturing Technology.

Occurrence and numerical prediction of surface defects during flanging of metallic sheets

Sandrine Thuillier, Pierre-Yves Manach, Alban Le Port, 2010 .

Experimental study of surface defects on automotive doors during flanging and their numerical prediction

Sandrine Thuillier, Pierre-Yves Manach, A. Le Port, 2010 .

Quality of the strain state in simple shear testing using field measurement techniques

Sandrine Thuillier, Pierre-Yves Manach, Baptiste Reyne, 2021 .

Solution Behavior Near Very Rough Walls under Axial Symmetry: An Exact Solution for Anisotropic Rigid/Plastic Material

Pierre-Yves Manach, Sergei Alexandrov, Elena Lyamina, 2021, Symmetry.

Optimization of processing parameters and surface roughness of metallic sheets plastically deformed by incremental forming process

Atef Boulila, Z. Tourki, Pierre-Yves Manach, 2019, The International Journal of Advanced Manufacturing Technology.

Numerical simulation of the roll hemming process

Sandrine Thuillier, Pierre-Yves Manach, P. Manach, 2008 .

Comparison of the work-hardening of metallic sheets in bending-unbending and simple shear

Sandrine Thuillier, Pierre-Yves Manach, Michel Brunet, 2009 .

Mechanical Behaviour and Springback Study of an Aluminium Alloy in Warm Forming Conditions

Luís Menezes, António Andrade-Campos, Pierre-Yves Manach, 2011 .

Drawing, flanging and hemming of metallic thin sheets: A multi-step process

Sandrine Thuillier, Pierre-Yves Manach, P. Manach, 2010 .

Comparison of the work-hardening of metallic sheets using tensile and shear strain paths

Sandrine Thuillier, Pierre-Yves Manach, P. Manach, 2009 .

On the benefits of a stress criterion for the simulation of cup drawing process

Pierre-Yves Manach, Roland E. Logé, Marc Milesi, 2017 .

Experimental and numerical study of springback in aluminum alloys based on a split-ring test

Pierre-Yves Manach, Hervé Laurent, Renaud Grèze, 2008 .