Giada Gasparini

Tomaso Trombetti, Giada Gasparini, Baraccani Simonetta, 2015, 2015 IEEE Workshop on Environmental, Energy, and Structural Monitoring Systems (EESMS) Proceedings.

RESULTS OF "PSEUDO-STATIC" TESTS WITH CYCLIC HORIZONTAL LOAD ON R.C. PANELS MADE WITH WOOD-CONCRETE CAISSON BLOCKS

Claudio Ceccoli, Tomaso Trombetti, Stefano Silvestri, 2008 .

Results of pseudo-static tests with cyclic horizontal load on cast in situ sandwich squat concrete walls

Tomaso Trombetti, Michele Palermo, Stefano Silvestri, 2013 .

Application of a Direct Procedure for the Seismic Retrofit of a R/C School Building Equipped with Viscous Dampers

Tomaso Trombetti, Michele Palermo, Luca Landi, 2015, Front. Built Environ..

STRUCTURAL SAFETY OF THE MODENA CATHEDRAL

Tomaso Trombetti, Michele Palermo, Stefano Silvestri, 2014 .

AN ASSESSMENT OF THE STRUCTURAL BEHAVIOUR OF THE GARISENDA TOWER IN BOLOGNA THROUGH FINITE ELEMENT MODELLING AND STRUCTURAL HEALTH MONITORING

Giada Gasparini, Michele Palermo, Simonetta Baraccani, 2019 .

A “direct five-step procedure” for the preliminary seismic design of buildings with added viscous dampers

Tomaso Trombetti, Michele Palermo, Luca Landi, 2018, Engineering Structures.

The static and dynamic monitoring of the Asinelli tower in Bologna, Italy

Tomaso Trombetti, Michele Palermo, Stefano Silvestri, 2016 .

A special solution for lateral-resisting systems capable of multiple seismic performances

Tomaso Trombetti, Stefano Silvestri, Giada Gasparini, 2011 .

Corrigendum to “Multi-performance seismic design through an enhanced first-storey isolation system” [Eng. Struct. 59 (2014) 495–506]

Tomaso Trombetti, Michele Palermo, Stefano Silvestri, 2016 .

STIFFNESS-STRENGTH-DUCTILITY-DESIGN FOR CRESCENT SHAPED BRACES

Tomaso Trombetti, Stefano Silvestri, Giada Gasparini, 2008 .

Use of toggle brace system for the amplification of seismic damper motion in building structures

Tomaso Trombetti, Stefano Silvestri, Giada Gasparini, 2006 .

Physically-based prediction of the maximum corner displacement magnification of one-storey eccentric systems

Tomaso Trombetti, Michele Palermo, Stefano Silvestri, 2013, Bulletin of Earthquake Engineering.

The structural behaviour of the masonry vaults of the Cathedral of Modena

Tomaso Trombetti, Michele Palermo, Stefano Silvestri, 2017 .

Reinforcement design of the Filetto Bridge on the Santerno river near Bologna, Italy

Claudio Ceccoli, Tomaso Trombetti, Stefano Silvestri, 2009 .

Strong-Back System Coupled with Framed Structure to Control theBuilding Seismic Response

Tomaso Trombetti, Michele Palermo, Vittoria Laghi, 2017 .

ASESGRAMAssessment of the Seismic Behaviour of Flat‐bottom SilosContaining Grain‐like Materials‐ Final Report ‐

S. Ivorra, Tomaso Trombetti, Stefano Silvestri, 2013 .

Use of Crescent Shaped Braces for Controlled Seismic Design of Ductile Structures

Tomaso Trombetti, Stefano Silvestri, Giada Gasparini, 2011 .

A PROCEDURE FOR THE DIMENSIONING OF VISCOUS DAMPERS TO BE INSERTED IN BUILDING STRUCTURES, PART I: FORMULATION

Tomaso Trombetti, Stefano Silvestri, Giada Gasparini, 2009 .

Italy's new forensic engineering research centre: a progress report

Tomaso Trombetti, Michele Palermo, Stefano Silvestri, 2015 .

Structural Interpretation of Data from Static and Dynamic Structural Health Monitoring of Monumental Buildings

Tomaso Trombetti, Michele Palermo, Stefano Silvestri, 2017 .

A Case Study of a Building in L'Aquila, Italy for Evaluating the Effects of Masonry Infills on the Seismic Behavior of R.C. Frame Structures

Tomaso Trombetti, Luca Landi, Stefano Silvestri, 2010 .

A Structural Analysis of the Modena Cathedral

Tomaso Trombetti, Michele Palermo, Renato Lancellotta, 2015 .

Humboldt Bay Middle Channel Bridge: 3D Bridge-foundations-ground System

Ahmed Elgamal, Tomaso Trombetti, Davide Forcellini, 2007 .

Shaking‐table tests of flat‐bottom circular silos containing grain‐like material

Salvador Ivorra, Tomaso Trombetti, Stefano Silvestri, 2016 .

The “Filetto” Bridge on the Santerno River near Bologna (Italy): seismic retrofit and reinforcement design

Claudio Ceccoli, Tomaso Trombetti, Stefano Silvestri, 2010 .

A comprehensive study on the seismic response of one-storey asymmetric systems

Tomaso Trombetti, Michele Palermo, Stefano Silvestri, 2016, Bulletin of Earthquake Engineering.

Numerical Verification of the Effectiveness of the “Alpha” Method for the Estimation of the Maximum Rotational Elastic Response of Eccentric Systems

Barbara Pintucchi, Tomaso Trombetti, Stefano Silvestri, 2008 .

A novel scheme for the mitigation of the seismic action through the use of viscous dampers: a parametric study

Tomaso Trombetti, Stefano Silvestri, Giada Gasparini, 2008 .

A statistical study on the peak ground parameters and amplification factors for an updated design displacement spectrum and a criterion for the selection of recorded ground motions

Tomaso Trombetti, Michele Palermo, Stefano Silvestri, 2014 .

Structural Strengthening of the Portico of the Santa Maria Dei Servi Church in Bologna

Tomaso Trombetti, Michele Palermo, Stefano Silvestri, 2016 .

Peak velocities estimation for a direct five-step design procedure of inter-storey viscous dampers

Tomaso Trombetti, Michele Palermo, Luca Landi, 2016, Bulletin of Earthquake Engineering.

An Application of a Proposed Stiffness-Strength-Ductility Design Approach to a Five Storey Steel Building Structure

Tomaso Trombetti, Stefano Silvestri, Giada Gasparini, 2010 .

A Five-Step Procedure for the Dimensioning of Viscous Dampers to Be Inserted in Building Structures

Tomaso Trombetti, Stefano Silvestri, Giada Gasparini, 2010 .

Seismic Modal Contribution Factors

Tomaso Trombetti, Michele Palermo, Stefano Silvestri, 2015, Bulletin of Earthquake Engineering.

Multi-performance seismic design through an enhanced first-storey isolation system

Tomaso Trombetti, Michele Palermo, Stefano Silvestri, 2013 .

On the evaluation of the horizontal forces produced by grain-like material inside silos during earthquakes

Tomaso Trombetti, Stefano Silvestri, Giada Gasparini, 2012, Bulletin of Earthquake Engineering.

Crescent shaped braces for the seismic design of building structures

Tomaso Trombetti, Michele Palermo, Stefano Silvestri, 2015 .

DESIGN OF A SHAKING TABLE TEST ON A 3-STOREY BUILDING COMPOSED OF CAST-IN-SITU CONCRETE WALLS

Stefano Silvestri, Giada Gasparini, Ilaria Ricci, 2012 .

Tensile properties and microstructural features of 304L austenitic stainless steel produced by wire-and-arc additive manufacturing

Tomaso Trombetti, Michele Palermo, Vittoria Laghi, 2020, The International Journal of Advanced Manufacturing Technology.

Shaking table testing of symmetric and asymmetric three-storey steel frame structures.

Adam J Crewe, Tomaso Trombetti, M. De Stefano, 2004 .

Chairman della "S14 Seismic Design Optimization" in sostituzione del Prof. T. Trombetti alla 14th World Conference on Earthquake Engineering, October 12-17, 2008, Beijing, China

Stefano Silvestri, Giada Gasparini, S. Silvestri, 2008 .

Experimental results for structural design of Wire-and-Arc Additive Manufactured stainless steel members

Tomaso Trombetti, Michele Palermo, Vittoria Laghi, 2019 .