Valentin Oleksik

发表

Numerical-experimental comparison study regarding single point incremental forming process

Ioan Bondrea, Valentin Oleksik, Adrian Pascu, 2013 .

STUDY REGARDING THE INFLUENCE OF GEOMETRICAL PARAMETERS DURING THE INCREMENTAL FORMING PROCESS

Cristian Deac, Valentin Oleksik, Radu-Eugen Breaz, 2008 .

Experimental Determining of Mechanical and Elastic Characteristics for the Material Used in the Manufacturing of Cardan Crosses

Valentin Oleksik, Adrian Pascu, Eugen Avrigean, 2014 .

Comparison between the numerical simulations of incremental sheet forming and conventional stretch forming process

Radu-Eugen Breaz, Valentin Oleksik, Gabriel Racz, 2008 .

Inverse Analysis Used to Determine Plastic Flow and Tribological Characteristics for Deep-drawing Sheet☆

Ioan Bondrea, Valentin Oleksik, Adrian Pascu, 2014 .

Experimental Studies Regarding the Single Point Incremental Forming Process

Adinel Gavrus, Valentin Oleksik, Adrian Pascu, 2010 .

Comparative Study for Springback Prediction on Single Point Incremental Forming Process

Ioan Bondrea, Valentin Oleksik, Adrian Pascu, 2014 .

STUDY ON THE INFLUENCE OF THE TEMPERATURE AND STRAIN RATE ON THE BEHAVIOR OF POLYAMIDE 6.6 AT THE UNIAXIAL TENSILE TEST

Cristian Deac, Valentin Oleksik, Nicolae Cofaru, 2013 .

COMPARATIVE ANALYSIS OF RIGID AND FLEXIBLE STRUCTURES OF THE ECCENTRIC PRESSES

Radu-Eugen Breaz, Valentin Oleksik, Gabriel Racz, 2007 .

Generalized Modelling of the Stabilizer Link and Static Simulation Using FEM

Valentin Oleksik, Adrian Pascu, Nicolae Cofaru, 2016 .

Experimental Studies Regarding the Mechanical Behaviour of Silicon-Coated and Uncoated P.A. 6.6 Fabrics

Valentin Oleksik, Mihaela Oleksik, 2014 .

Numerical study about the strain analysis and the marginal design of dental indirect restorations

Valentin Oleksik, Adrian Pascu, Hermann Oberth, 2012 .

ROUGHNESS CONTROL OF PARTS OBTAINED THROUGH INCREMENTAL SHEET FORMING

Cristian Deac, Valentin Oleksik, Gabriel Racz, 2007 .

Incremental forming – CAE/CAM approaches and results

Radu-Eugen Breaz, Valentin Oleksik, Gabriel Racz, 2019, IOP Conference Series: Materials Science and Engineering.

Experimental Studies and FEM Analysis Regarding the Influence of Geometric Parameters on Strain, Thickness Reduction and Forces in Incremental Forming Process

Valentin Oleksik, Radu-Eugen Breaz, Octavian Bologa, 2011 .

Single point incremental forming: An assessment of the progress and technology trends from 2005 to 2015

Giuseppe Ingarao, Amar Kumar Behera, Valentin Oleksik, 2017 .

Experimental strain field distribution in ankle-foot orthosis (AFO)

Cristian Deac, Valentin Oleksik, Adrian Pascu, 2009 .

Theoretical and Experimental Studies on the Influence of Process Parameters on Strains and Forces of Single Point Incremental Forming

Ioan Bondrea, Valentin Oleksik, Adrian Pascu, 2014 .

Simulated 3-axis versus 5-axis Processing Toolpaths for Single Point Incremental Forming

Valentin Oleksik, Radu-Eugen Breaz, Gabriel Racz, 2019 .

Aspects of Improving the Cost-Performance Ratio for the Manufacturing of Small-Size Cast Parts

Cristian Deac, Valentin Oleksik, Melania Tera, 2010 .

Advanced Techniques used in Numerical Simulation for Deep-drawing Process

Valentin Oleksik, Radu-Eugen Breaz, Gabriel Racz, 2019, MATEC Web of Conferences.

NUMERICAL SIMULATION OF THE INCREMENTAL FORMING PROCESS FOR KNEE IMPLANTS

Cristian Deac, Valentin Oleksik, Adrian Pascu, 2009 .

A Study on the Influence of the Forming Strategy on the Main Strains, Thickness Reduction, and Forces in a Single PointIncremental Forming Process

Valentin Oleksik, Adrian Blaga, 2013 .

The Influence of Geometrical Parameters on the Incremental Forming Process for Knee Implants Analyzed by Numerical Simulation

Cristian Deac, Valentin Oleksik, Adrian Pascu, 2010 .

Numerical Simulations and Experimental Researches for Determining the Forces of Incremental Sheet Forming Process

Radu-Eugen Breaz, Valentin Oleksik, Gabriel Racz, 2007 .