Adrian Pascu

发表

Numerical-experimental comparison study regarding single point incremental forming process

Ioan Bondrea, Valentin Oleksik, Adrian Pascu, 2013 .

Study of the Cardan Cross Using the Experimental and Analytical Method

Adrian Pascu, Eugen Avrigean, Valentin Oleksik, 2015 .

Experimental Determining of Mechanical and Elastic Characteristics for the Material Used in the Manufacturing of Cardan Crosses

Valentin Oleksik, Adrian Pascu, Eugen Avrigean, 2014 .

An Overview of Romanian Command and Control Systems

Adrian Pascu, Stefan Cantaragiu, 2002 .

Inverse Analysis Used to Determine Plastic Flow and Tribological Characteristics for Deep-drawing Sheet☆

Ioan Bondrea, Valentin Oleksik, Adrian Pascu, 2014 .

Experimental Studies Regarding the Single Point Incremental Forming Process

Adinel Gavrus, Valentin Oleksik, Adrian Pascu, 2010 .

Comparative Study for Springback Prediction on Single Point Incremental Forming Process

Ioan Bondrea, Valentin Oleksik, Adrian Pascu, 2014 .

Generalized Modelling of the Stabilizer Link and Static Simulation Using FEM

Valentin Oleksik, Adrian Pascu, Nicolae Cofaru, 2016 .

Numerical study about the strain analysis and the marginal design of dental indirect restorations

Valentin Oleksik, Adrian Pascu, Hermann Oberth, 2012 .

Monotonic and Fatigue Behavior of Magnesium Extrusion Alloy AM30: An International Benchmark Test in the "Magnesium Front End Research and Development Project"

Lin Zhang, Mark F. Horstemeyer, Steve Lambert, 2010 .

Experimental strain field distribution in ankle-foot orthosis (AFO)

Cristian Deac, Valentin Oleksik, Adrian Pascu, 2009 .

Theoretical and Experimental Studies on the Influence of Process Parameters on Strains and Forces of Single Point Incremental Forming

Ioan Bondrea, Valentin Oleksik, Adrian Pascu, 2014 .

Determination by experimental and numerical methods of the stress and strain states in perforated plates with square holes placed in a parallel pattern, stressed with uniaxial traction

Adrian Pascu, Galaftion Sofonea, Marcu Frăţilă, 2006 .

Finite element simulations regard different alternatives of the single point incremental forming process

Adrian Pascu, Valentin Oleksik, Nicolae Cofaru, 2008 .

Microporosity effects on cyclic plasticity and fatigue of LENS™-processed steel

Mark F. Horstemeyer, Adrian Pascu, Yibin Xue, 2010 .

NUMERICAL SIMULATION OF THE INCREMENTAL FORMING PROCESS FOR KNEE IMPLANTS

Cristian Deac, Valentin Oleksik, Adrian Pascu, 2009 .

The Influence of Geometrical Parameters on the Incremental Forming Process for Knee Implants Analyzed by Numerical Simulation

Cristian Deac, Valentin Oleksik, Adrian Pascu, 2010 .

NON-DESTRUCTIVE INSPECTION OF COMPOSITE STRUCTURES USING ACTIVE IR-THERMOGRAPHY METHODS

Adrian Pascu, Viorel Anghel, Nicolae Constantin, 2011 .