Archimede Forcellese

发表

A statistically based methodology in the identification of friction welding parameters

Michela Simoncini, Carlo Bruni, Filippo Gabrielli, 2011 .

Springback Evaluation in Fully 3-D Sheet Metal Forming Processes

Fabrizio Micari, Livan Fratini, N. Alberti, 1997 .

Effect of the lubrication-cooling technique, insert technology and machine bed material on the workpart surface finish and tool wear in finish turning of AISI 420B

Michela Simoncini, Carlo Bruni, Filippo Gabrielli, 2006 .

Comparative life cycle assessment of carbon fiber reinforced compositecomponents for automotive industry

Marco Marconi, Tommaso Mancia, Vincenzo Castorani, 2021 .

Air bending of AZ31 magnesium alloy in warm and hot forming conditions

Michela Simoncini, Filippo Gabrielli, Archimede Forcellese, 2006 .

Effect of the welding parameters and tool configuration on micro- and macro-mechanical properties of similar and dissimilar FSWed joints in AA5754 and AZ31 thin sheets

Michela Simoncini, Archimede Forcellese, A. Forcellese, 2012 .

New Approaches to the Friction Stir Welding of Aluminum Alloys

Michela Simoncini, Archimede Forcellese, M. Cabibbo, 2016 .

Prediction of flow curves and forming limit curves of Mg alloy thin sheets using ANN-based models

Michela Simoncini, Filippo Gabrielli, Archimede Forcellese, 2011 .

Effect of temperature, strain rate and fibre orientation on the plastic flow behaviour and formability of AZ31 magnesium alloy

Michela Simoncini, Filippo Gabrielli, Archimede Forcellese, 2010 .

Hot formability of AA 6061 PM aluminium alloy

Paolo Mengucci, Archimede Forcellese, E. Evangelista, 1990 .

Sheet Metal Forming of Titanium Blanks Using Flexible Media

Livan Fratini, N. Alberti, Archimede Forcellese, 1998 .

Robotic Friction Stir Welding of AA5754 Aluminum Alloy Sheets at Different Initial Temper States

Massimo Callegari, Michela Simoncini, Archimede Forcellese, 2014 .

Milena Martarelli, G. Pandarese, Michela Simoncini, 2013 .

Hot workability and models for flow stress of NIMONIC 115 Ni-base superalloy

Filippo Gabrielli, Archimede Forcellese, A. Forcellese, 2002 .

Effect of process parameters on vertical forces and temperatures developed during friction stir welding of magnesium alloys

Milena Martarelli, Michela Simoncini, Archimede Forcellese, 2016 .

Hard turning of an alloy steel on a machine tool with a polymer concrete bed

Michela Simoncini, Filippo Gabrielli, Archimede Forcellese, 2008 .

Sustainability Analysis of Friction Stir Welding of AA5754 Sheets

Maurizio Bevilacqua, Filippo Emanuele Ciarapica, Michela Simoncini, 2017 .

Modelling of the rheological behaviour of aluminium alloys in multistep hot deformation using the multiple regression analysis and artificial neural network techniques

Michela Simoncini, Filippo Gabrielli, Archimede Forcellese, 2006 .

Thermal error prediction in a machining center using statistical and neural network–based models

Michela Simoncini, Filippo Gabrielli, Archimede Forcellese, 2004 .

Prediction of damage evolution in forged aluminium metal matrix composites using a neural network approach

Philip J. Withers, Jan Kusiak, S. M. Roberts, 1998 .

Sheet Bending Modelling for AA 5083 Aluminium Alloy

Fabrizio Micari, Livan Fratini, Archimede Forcellese, 1995 .

Hot formability studies on 359/SiC/20p and their application in forging optimisation

Archimede Forcellese, E. Evangelista, A. Forcellese, 1996 .

Tool wear and hole quality in drilling of CFRP/AA7075 stacks with DLC and nanocomposite TiAlN coated tools

Michela Simoncini, Archimede Forcellese, M. El Mehtedi, 2017 .

Artificial neural-network-based control system for springback compensation in press-brake forming

Filippo Gabrielli, Archimede Forcellese, 2001 .

Frictional behaviour of AA7075-O aluminium alloy in high speed tests

Michela Simoncini, Marco Sasso, Edoardo Mancini, 2017 .

Computer aided engineering of the sheet bending process

Fabrizio Micari, Livan Fratini, Filippo Gabrielli, 1996 .