Jiwen Cui

发表

An Optoelectronic Equivalent Narrowband Filter for High Resolution Optical Spectrum Analysis

Weidong Wu, Kunpeng Feng, Jiubin Tan, 2017, Sensors.

Variable window and variant threshold segmentation algorithm based on light field intensity

Jiubin Tan, Jiwen Cui, Wen-jing Kang, 2006, International Commission for Optics.

Measurement of micro-hole with high aspect ratio by double optical fibers coupling

Fei Wang, Jiubin Tan, Jiwen Cui, 2009, Other Conferences.

Evaluation of measurement uncertainty in H-drive stage during high acceleration based on Monte Carlo method

Jiubin Tan, Jieru Cao, Jiwen Cui, 2015 .

Enhancement of the Performance and Data Processing Rate of an Optical Frequency Domain Reflectometer Distributed Sensing System Using A Limited Swept Wavelength Range

Kunpeng Feng, Yizhao Niu, Dong Jiang, 2018, Sensors.

An example image super-resolution algorithm based on modified k-means with hybrid particle swarm optimization

Kunpeng Feng, Jiubin Tan, Jiwen Cui, 2014, Photonics Asia.

Investigation of a Signal Demodulation Method based on Wavelet Transformation for OFDR to Enhance Its Distributed Sensing Performance

Kunpeng Feng, Hong Dang, Yizhao Niu, 2019, Sensors.

Research on Extraction of Ship Target in Complex Sea-sky Background

Lei Ao, Jiwen Cui, Wen-jing Kang, 2006 .

Effects of dynamic characters of the macro-micro fast coupling system in long stroke system

Yong Yuan, Jiwen Cui, Jianwei Wu, 2015, Precision Engineering Measurements and Instrumentation.

Analysis and simulation method of the cantilever FBG sensors

Kunpeng Feng, Jiubin Tan, Junying Li, 2016, International Symposium on Precision Mechanical Measurements.

Error mechanism analyses of an ultra-precision stage for high speed scan motion over a large stroke

Jiubin Tan, Jiwen Cui, Shaokai Wang, 2015, Precision Engineering Measurements and Instrumentation.

Structural parameters analysis and optimization of line-structured light measuring system

Jianwei Wu, Jiubin Tan, Jiwen Cui, 2016, 2016 23rd International Conference on Mechatronics and Machine Vision in Practice (M2VIP).

Use of Two Planar Gratings to Measure 3-DOF Displacements of Planar Moving Stage

Jiubin Tan, Jieru Cao, Jiwen Cui, 2015, IEEE Transactions on Instrumentation and Measurement.

A uniform and flexible model for three-dimensional measurement of line-structured light sensor

Zhe Li, Jiubin Tan, Jiwen Cui, 2019, International Symposium on Precision Engineering Measurement and Instrumentation.

Carrier Attitude Adjustment Strategy of a Space Robot for On-Orbit Detection

Yin Zhang, Jiubin Tan, Jiwen Cui, 2016 .

Subpixel edge location based on orthogonal Fourier-Mellin moments

Dandan Liu, Wenjing Kang, Ao Lei, 2008, Image Vis. Comput..

Design and testing of alterable preload running-in system of solid lubricated bearings

Jianwei Wu, Jiwen Cui, Hefan Zhao, 2013, Other Conferences.

Investigation of a Three-Dimensional Micro-Scale Sensing System Based on a Tapered Self-Assembly Four-Cores Fiber Bragg Grating Probe

Kunpeng Feng, Yizhao Niu, Jiubin Tan, 2018, Sensors.

Improved MAP Based Algorithm for Image Super-resolution Restoration

Kunpeng Feng, Wenlong Yu, Jiwen Cui, 2013, 2013 Seventh International Conference on Image and Graphics.

A generalized analytical compliance model for cartwheel flexure hinges.

Jianwei Wu, Jiubin Tan, Jiwen Cui, 2015, The Review of scientific instruments.

Multi-structure elements morpholoy for improved anti-noise edge detection

Hui Wang, Jiwen Cui, Jiubin Tan, 2019, International Symposium on Precision Engineering Measurement and Instrumentation.

Automatic extraction of road network from aerial images

Lei Ao, Wenjing Kang, Xuemei Ding, 2006, 2006 1st International Symposium on Systems and Control in Aerospace and Astronautics.

An interrogation method with high resolution and high response speed for FBGs-based sensors

Kunpeng Feng, Yizhao Niu, Jiubin Tan, 2019, International Symposium on Precision Engineering Measurement and Instrumentation.

Multiple-grating self-correcting algorithm for processed mark measurement error

Jiubin Tan, Jiwen Cui, Tao Zhang, 2015, Precision Engineering Measurements and Instrumentation.

Nonlinearity Correction in OFDR System Using a Zero-Crossing Detection-Based Clock and Self-Reference

Jiwen Cui, Jiubin Tan, Shiyuan Zhao, 2019, Sensors.

Improving the pneumatic hammer stability of aerostatic thrust bearing with recess using damping orifices

Wei Ma, Jiwen Cui, Yongmeng Liu, 2016 .

FBG Interrogation Method with High Resolution and Response Speed Based on a Reflective-Matched FBG Scheme

Kunpeng Feng, Yang Hu, Junying Li, 2015, Sensors.

Parallel Transport Frame for Fiber Shape Sensing

Jiubin Tan, Jiwen Cui, Shiyuan Zhao, 2018, IEEE Photonics Journal.

A Novel Enhanced Roll-Angle Measurement System Based on a Transmission Grating Autocollimator

Jiwen Cui, Jiubin Tan, Wenran Ren, 2019, IEEE Access.

Performance Investigation of OFDR Sensing System With a Wide Strain Measurement Range

Jiubin Tan, Jiwen Cui, Da-Peng Zhou, 2019, Journal of Lightwave Technology.

Development of ultra-precision micro-cavity measurement technique in HIT-UOI

Lei Li, Jiwen Cui, 2010, International Symposium on Precision Engineering Measurement and Instrumentation.

Optimization of Cartesian trajectory for Accompanyingflight Space robot during on-orbit Detection

Jiubin Tan, Jiwen Cui, Jianwei Wu, 2015, Int. J. Robotics Autom..

Investigation of the interpolation method to improve the distributed strain measurement accuracy in optical frequency domain reflectometry systems.

Zhenyang Ding, Di Yang, Jiwen Cui, 2018, Applied optics.

Extension of light transmission distance of single core fiber with a micro axicon fixed at fiber end

Jiubin Tan, Jiwen Cui, Tong Zhou, 2015, Precision Engineering Measurements and Instrumentation.

Design and Control of Planar Parallel Mechanisms with High Speed and High Precision

Li Ning Sun, Jiwen Cui, Yuetao Liu, 2006 .

Fast auto-focusing based on partial image characteristics

Jiubin Tan, Jiwen Cui, 2008, International Symposium on Laser Metrology.

Dimensional measurement of micro parts with high aspect ratio in HIT-UOI

Kunpeng Feng, Jiubin Tan, Junying Li, 2016, SPIE/COS Photonics Asia.

Analysis of pneumatic hammer in rectangular aerostatic thrust bearing with groove

Jiubin Tan, Wei Ma, Jiwen Cui, 2015, Precision Engineering Measurements and Instrumentation.

Application of deadbeat control with constraint and non-ripple in precision rapid displacement system

Peng Li, Jiwen Cui, Xuemei Ding, 2015, Precision Engineering Measurements and Instrumentation.

An Assembly Method for the Multistage Rotor of An Aero-Engine Based on the Dual Objective Synchronous Optimization for the Coaxality and Unbalance

Jiwen Cui, Yue Chen, Xun Sun, 2021 .

Research on Multistage Rotor Assembly Optimization Methods for Aeroengine Based on the Genetic Algorithm

Shihai Cui, Jiwen Cui, Yue Chen, 2021, Complex..

An Unbalance Optimization Method for a Multi-Stage Rotor Based on an Assembly Error Propagation Model

Jiwen Cui, Yue Chen, Xun Sun, 2021 .

Improvement of vision measurement accuracy using Zernike moment based edge location error compensation model

Jiubin Tan, Jiwen Cui, Y Zhou, 2007 .

Fan-out device for multicore fiber coupling application based on capillary bridge self-assembly fabrication method

Kunpeng Feng, Jiubin Tan, Jiwen Cui, 2015 .

A hybrid method based on reduced constraint region and convex-hull edge for flatness error evaluation

Peng Li, Jiubin Tan, Xuemei Ding, 2016 .

Optical fiber probe based on spherical coupling of light energy for inner-dimension measurement of microstructures with high aspect ratios.

Jiubin Tan, Jiwen Cui, Lei Li, 2011, Optics letters.

Simultaneous multi-channel absolute position alignment by multi-order grating interferometry.

Jiubin Tan, Jiwen Cui, Zhang Tao, 2016, Optics express.

Stimulated Brillouin scattering evolution and suppression in an integrated stimulated thermal Rayleigh scattering-based fiber laser

Kunpeng Feng, Wenlei Yang, Tao Geng, 2017 .

Development of a double fiber probe with a single fiber Bragg grating for dimensional measurement of microholes with high aspect ratios.

Kunpeng Feng, Jiubin Tan, Jiwen Cui, 2014, Optics letters.

Improvement of dimensional measurement accuracy of microstructures with high aspect ratio with a spherical coupling fiber probe

Jiubin Tan, Jiwen Cui, Yuanzheng Chen, 2014 .

Four-Cores FBG Probe Based on Capillary Self-Assembly Fabrication Technique for 3D Measurement

Kunpeng Feng, Jiubin Tan, Jiwen Cui, 2016, IEEE Photonics Technology Letters.

Further improvement of edge location accuracy of double fiber spherical coupling sensor using orthogonal Jacobi–Fourier moments

Kunpeng Feng, Jiubin Tan, Jiwen Cui, 2014 .

Further improvement of edge location accuracy of charge-coupled-device laser autocollimators using orthogonal Fourier-Mellin moments

Lei Ao, Jiubin Tan, Jiwen Cui, 2007 .

Double fiber probe with a single fiber Bragg grating based on the capillary-driven self-assembly fabrication method for dimensional measurement of micro parts.

Kunpeng Feng, Jiubin Tan, Jiwen Cui, 2015, Optics express.

A 3D fiber probe based on orthogonal micro focal-length collimation and fiber Bragg grating

Jian Zhang, Kunpeng Feng, Jiubin Tan, 2016 .

Enhancing laser beam directional stability by single-mode optical fiber and feedback control of drifts

Jiubin Tan, Jiwen Cui, Lirong Qiu, 2005 .

A OFDR Signal Processing Method Based on Wavelet Transform for Improving Its Sensing Performance

Kunpeng Feng, Jiwen Cui, Hong Dang, 2019, IEEE Photonics Technology Letters.

Subpixel edge location method proposed to improve the performance of optical fiber spherical coupling probe during dimensional measurement of micro-cavities with high aspect ratio

Kunpeng Feng, Jiubin Tan, Jiwen Cui, 2014 .

Modeling and analysis of conical-shaped notch flexure hinges based on NURBS

Jiwen Cui, Shuai Cai, Yin Zhang, 2018, Mechanism and Machine Theory.

Common-path design criteria for laser datum based measurement of small angle deviations and laser autocollimation method in compliance with the criteria with high accuracy and stability.

Jiubin Tan, Jiwen Cui, Jiubin Tan, 2013, Optics express.

Opto-tactile probe based on spherical coupling for inner dimension measurement

Jiubin Tan, Jiwen Cui, Lei Li, 2012 .

Three-dimensional fiber probe based on orthogonal micro focal-length collimation for the measurement of micro parts.

Kunpeng Feng, Jiubin Tan, Jiwen Cui, 2015, Optics express.

Fiber probe for micro-hole measurement based on detection of returning light energy

Jiubin Tan, Jiwen Cui, Junying Li, 2013 .

Fiber deflection probing method based on micro focal-length collimation.

Jiubin Tan, Jiwen Cui, Fei Wang, 2010, Optics express.

A Twin FBG Probe and Integration With a Microhole-Measuring Machine for the Measurement of Microholes of High Aspect Ratios

Kunpeng Feng, Jiubin Tan, Jiwen Cui, 2016, IEEE/ASME Transactions on Mechatronics.

A Twin Fiber Bragg Grating Probe for the Dimensional Measurement of Microholes

Kunpeng Feng, Jiubin Tan, Jiwen Cui, 2014, IEEE Photonics Technology Letters.

Development of FBG probes for dimensional metrology with micro parts of high aspect ratio

Kunpeng Feng, Jiubin Tan, Jiwen Cui, 2013 .

Optimized algorithm of laser spot center location in strong noise

Lei Ao, Jiubin Tan, Jiwen Cui, 2005 .

Extension of light transmission distance of single-mode fiber using a microaxicon-lensed fiber end.

Jiubin Tan, Jiwen Cui, Yuanzheng Chen, 2015, Applied optics.

Linear response, multi-order grating interferometry using a reversal shearing imaging system.

Jiubin Tan, Jiwen Cui, Zhang Tao, 2015, Optics letters.

Three-dimensional fiber probe based on micro focal-length collimation and a fiber Bragg grating for the measurement of micro parts.

Kunpeng Feng, Jiubin Tan, Jiwen Cui, 2015, Optics letters.