Emílio Carlos Nelli Silva

发表

Optimum place of piezoelectric material in the piezoactuator design

Shinji Nishiwaki, Ronny C. Carbonari, Emílio Carlos Nelli Silva, 2006, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Determination of full piezoelectric complex parameters using gradient-based optimization algorithm

Emílio Carlos Nelli Silva, Nicolas Perez, César Y. Kiyono, 2016 .

Design of functionally graded piezoelectric actuators using topology optimization

Glaucio H. Paulino, Ronny C. Carbonari, Emílio Carlos Nelli Silva, 2006, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Advances in computational design and optimization with application to MEMS

Noboru Kikuchi, Emílio Carlos Nelli Silva, Bing-Chung Chen, 2001 .

Design of flextensional piesoeletric actuators using topology optimization

Emílio Carlos Nelli Silva, 1999 .

Analysis of the influence of tiny mirrors and mechanical holder in the interferometric measurements of piezoceramic displacements operating in a kHz range

Emílio Carlos Nelli Silva, Gilder Nader, Alessandro Barbosa Shirahige, 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Design of functionally graded piezocomposites using topology optimization and homogenization - Toward effective energy harvesting materials

Glaucio H. Paulino, Emílio Carlos Nelli Silva, Sandro L. Vatanabe, 2013 .

Topology optimization of smart structures: design of piezoelectric plate and shell actuators

Emílio Carlos Nelli Silva, Martin Kögl, M. Kögl, 2005 .

Optimization of an Adsorbed Natural Gas System with Phase Change Material using the Topology Optimization Method

Emílio Carlos Nelli Silva, R. C. R. Amigo, Diego S Prado, 2017 .

On response time reduction of electrothermomechanical MEMS using topology optimization

Ruben Andres Salas, Emílio Carlos Nelli Silva, Luis Augusto Motta Mello, 2012 .

Design of laminated piezocomposite shell transducers with arbitrary fiber orientation using topology optimization approach

Emílio Carlos Nelli Silva, J. N. Reddy, C. Y. Kiyono, 2012 .

Stress-constrained level set topology optimization for design-dependent pressure load problems

Emílio Carlos Nelli Silva, Eduardo Alberto Fancello, Helio Emmendoerfer, 2019, Computer Methods in Applied Mechanics and Engineering.

Design of Phononic Materials Using Multiresolution Topology Optimization

Emílio Carlos Nelli Silva, Sandro L. Vatanabe, 2013 .

Multi‐actuated functionally graded piezoelectric micro‐tools design: A multiphysics topology optimization approach

Glaucio H. Paulino, Ronny C. Carbonari, Emílio Carlos Nelli Silva, 2009 .

Topology Optimization Method Applied to the Design of a Vibrational Piezo-Structure Subjected to Active Control Law

Emílio Carlos Nelli Silva, Mariana Moretti, 2015 .

Topology Optimization of Sensor Structures Using Piezoresistive Effects

Shinji Nishiwaki, Emílio Carlos Nelli Silva, Wilfredo Montealegre Rubio, 2007 .

Development of a Complete Methodology to Reconstruct, Optimize, Analyze and Visualize Francis Turbine Runners

Humberto S. Makiyama, Thiago de Castro Martins, Marcos de Sales Guerra Tsuzuki, 2015 .

Topology optimization of flextensional piezoelectric actuators with active control law.

Emílio Carlos Nelli Silva, J. N. Reddy, M Moretti, 2019 .

Design of compliant mechanisms considering thermal effect compensation and topology optimization

Shinji Nishiwaki, Emílio Carlos Nelli Silva, Wilfredo Montealegre Rubio, 2010 .

Development of software for synthesis of truss-based compliant mechanisms using topology optimization

Emílio Carlos Nelli Silva, Rafael Mattar Machiaverni, E. C. Silva, 2003 .

Comparative Analysis of Fluid Topology Optimization Algorithms Based on Adjoint Methods

Emílio Carlos Nelli Silva, Eduardo Tadashi Katsuno, Carlos Massaiti Okubo Júnior, 2017 .

Laminated Piezocomposites Structures (LAPS) Designed for Topology Optimization Considering Simultaneously Harmonic and Transient Responses

Ruben Andres Salas, Emílio Carlos Nelli Silva, J. N. Reddy, 2014 .

Characterization of piezoeletric materials by using an optmimization algorithm

Emílio Carlos Nelli Silva, Julio C. Adamowski, Marco A. B. Andrade, 2007 .

New Advances in Topology Optimization

Glaucio H. Paulino, Salam Rahmatalla, Eric de Sturler, 2008 .

Optimal design of laminated piezocomposite energy harvesting devices considering stress constraints

Emílio Carlos Nelli Silva, J. N. Reddy, C. Y. Kiyono, 2016 .

Automatic Creation of Blending Surfaces in Hydropower Generators Turbine Blades

Thiago de Castro Martins, Marcos de Sales Guerra Tsuzuki, Emílio Carlos Nelli Silva, 2014 .

Design of FGM Piezoelectric Actuator Systems for Dynamic Applications by Using the Topology Optimization Method

Emílio Carlos Nelli Silva, Mariana Moretti, R. C. R. Amigo, 2014 .

Three-Dimensional Electrical Impedance Tomography: A Topology Optimization Approach

Raul Gonzalez Lima, Emílio Carlos Nelli Silva, Marcelo Britto Passos Amato, 2008, IEEE Transactions on Biomedical Engineering.

Synthesis of Piezocomposites

Emílio Carlos Nelli Silva, E. C. Silva, 2003 .

Design of Compliant Mechanism Considering Large Deformation using Topology Optimization Method

Paulo M. Pimenta, Emílio Carlos Nelli Silva, Paulo S. B. Nigro, 2014 .

Optimal design of periodic piezocomposites

Noboru Kikuchi, Emílio Carlos Nelli Silva, Jun S. Ono Fonseca, 1998 .

Structural Optimization Considering Flexibility : Structural Design of Actuators Using Piezoceramics

Noboru Kikuchi, Shinji Nishiwaki, Ying Li, 1999 .

Topology optimization of a tetrahedron mirror for a high-precision measuring and positioning machine

René Theska, Emílio Carlos Nelli Silva, Markus Dr.-Ing. Lotz, 2011 .

Determination of piezoelectric transducer damping by using experimental and finite element simulations

Emílio Carlos Nelli Silva, Gilder Nader, Julio Cesar Adamowski, 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Laminated Piezocomposites Structures (LAPS) Designed for Topology Optimization Considering the Transient Response

Ruben Andres Salas, Emílio Carlos Nelli Silva, J. N. Reddy, 2015 .

Design of functionally graded fully compliant mechanisms using topology optimization method with model order reduction

Paulo M. Pimenta, Emílio Carlos Nelli Silva, Eduardo T. Simões, 2014 .

A topology optimization approach applied to laminar flow machine rotor design

Emílio Carlos Nelli Silva, J. S. Romero, J. Romero, 2014 .

Topology optimization of piezoelectric bi-material actuators with velocity feedback control

Emílio Carlos Nelli Silva, Mariana Moretti, M. Moretti, 2019, Frontiers of Mechanical Engineering.

Experimental and numerical characterization of multi-actuated piezoelectric device designs using topology optimization

Shinji Nishiwaki, Ronny C. Carbonari, Emílio Carlos Nelli Silva, 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Topology optimization for force sensor structure considering accuracy of force detection

Shinji Nishiwaki, Akihiro Takezawa, Mitsuru Kitamura, 2008 .

Design of piezoelectric transducers using topology optimization

Noboru Kikuchi, Emílio Carlos Nelli Silva, 1999 .

Topology Optimization for Force Sensor Structure based on Singular Value Decomposition

Mitsuru Kitamura, Shinji Nishiwaki, Akihiro Takezawa, 2008 .

Optimization of Automotive Components Using the Variational Technology

Emílio Carlos Nelli Silva, Valdir Mendes Cardoso, 2004 .

Design of pressure vessels using shape optimization: An integrated approach

Glaucio H. Paulino, Kazuo Nishimoto, E. Q. Andrade, 2011 .

Design of piezoelectric multi-actuated microtools using topology optimization

Shinji Nishiwaki, Ronny C. Carbonari, Emílio Carlos Nelli Silva, 2005 .

Multi-actuated functionally graded piezoelectric micro-tools design using topology optimization

Glaucio H. Paulino, Ronny C. Carbonari, Emílio Carlos Nelli Silva, 2006, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Level set topology optimization for design‐dependent pressure load problems

Emílio Carlos Nelli Silva, Eduardo Alberto Fancello, Helio Emmendoerfer, 2018 .

Foil Strain Gauges Using Piezoresistive Carbon Nanotube Yarn: Fabrication and Calibration

Emílio Carlos Nelli Silva, César Y. Kiyono, Luciana W. da Silva, 2018, Sensors.

Layout and material gradation in topology optimization of functionally graded structures: a global–local approach

Glaucio H. Paulino, Emílio Carlos Nelli Silva, Sylvia R. Almeida, 2010 .

On the optimization of piezoresistive plate-based sensors with distribution of piezoresistive material

Emílio Carlos Nelli Silva, Luis Augusto Motta Mello, L. A. Mello, 2012, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Design optimization method for compliant mechanisms and material microstructure

Noboru Kikuchi, Shinji Nishiwaki, Emílio Carlos Nelli Silva, 1998 .