Yuwen Sun

发表

Several considerations in design of practical fiber-optic magnetometer

Yanbing Liu, Yuwen Sun, Wei-jun Zhang, 1993, Other Conferences.

A surface reconstruction strategy based on deformable template for repairing damaged turbine blades

Jinting Xu, Yu Rong, Yuwen Sun, 2014 .

Determination of the stability lobes with multi-delays considering cutter’s helix angle effect for machining process

Yan Jiang, Yuwen Sun, Qiang Guo, 2017 .

An adaptive feedrate scheduling method of dual NURBS curve interpolator for precision five-axis CNC machining

Yuwen Sun, Dongming Guo, Yurong Bao, 2013 .

RAPID PROTOTYPING MANUFACTURING BASED ON CLOUD DATA FROM FREE-FORM SURFACE

Yuwen Sun, Yuwen Sun, 2003 .

A mapping-based spiral cutting strategy for pocket machining

Xiangkui Zhang, Jinting Xu, Yuwen Sun, 2013 .

Analytical prediction of chatter stability in turning of low-stiffness pure iron parts by nosed tool

Yong Liu, Jinting Xu, Yuwen Sun, 2018, The International Journal of Advanced Manufacturing Technology.

A cutter orientation modification method for five-axis ball-end machining with kinematic constraints

Yuwen Sun, Dongming Guo, Yurong Bao, 2013 .

Guide curve based interpolation scheme of parametric curves for precision CNC machining

Yuwen Sun, Jun Wang, Dongming Guo, 2006 .

Automatic robotic polishing on titanium alloy parts with compliant force/position control

Jinting Xu, Yuwen Sun, Huapeng Du, 2015 .

Spiral cutting operation strategy for machining of sculptured surfaces by conformal map approach

Zhen-Yuan Jia, Yuwen Sun, Dongming Guo, 2006 .

Combined B-spline Surface Reconstruction of a Class of Wrap-around Models

Yuwen Sun, Yuwen Sun, 2010 .

RESEARCH ON THE ALGORITHM OF NC TOOL PATH CALCULATION FOR TRIANGULAR SURFACE MACHINING

Yuwen Sun, Yuwen Sun, 2002 .

Estimation and experimental validation of cutting forces in ball-end milling of sculptured surfaces

Zhenyuan Jia, Fei Ren, Yuwen Sun, 2009 .

Adaptive feedrate scheduling for NC machining along curvilinear paths with improved kinematic and geometric properties

Zhenyuan Jia, Fei Ren, Yuwen Sun, 2008 .

An automatic modelling strategy for the reverse engineering of wrap-around freeform surfaces

Zhenyuan Jia, Dong Ming Guo, Yuwen Sun, 2008 .

Tool path generation by offsetting curves on polyhedral surfaces based on mesh flattening

Jinting Xu, Yuwen Sun, Shunke Wang, 2013 .

RESEARCH ON THE METHOD OF ACCURATE NURBS SURFACE FITTING TO SCATTERED POINTS

Yuwen Sun, Yuwen Sun, 2004 .

Combined reparameterization-based spiral toolpath generation for five-axis sculptured surface machining

Fei Ren, Yuwen Sun, Dongming Guo, 2009 .

Tool path optimization for five-axis flank milling with cutter runout effect using the theory of envelope surface based on CL data for general tools

Bo Zhao, Yan Jiang, Yuwen Sun, 2016 .

Prediction of Frequency Response Function for Cylindrical Thin-Walled Workpiece with Fixture Support Constraints

Yuwen Sun, Jinbo Niu, Jinjie Jia, 2021, Mathematical Problems in Engineering.

State dependent regenerative stability and surface location error in peripheral milling of thin-walled parts

Jinting Xu, Yuwen Sun, Jinbo Niu, 2021 .

PLSP based layered contour generation from point cloud for additive manufacturing

Yuan-Shin Lee, Jinting Xu, Yuwen Sun, 2018 .

Adaptive feedrate planning for continuous parametric tool path with confined contour error and axis jerks

Jinting Xu, Yuwen Sun, Mansen Chen, 2017 .

Optimal localization of complex surfaces in CAD-based inspection

Weijun Liu, Jinting Xu, Yuwen Sun, 2008 .

Chatter stability and surface location error predictions in milling with mode coupling and process damping

Yuwen Sun, Shanglei Jiang, Zhongyun Li, 2019 .

Effect of roller burnishing process parameters on the surface roughness and microhardness for TA2 alloy

Yuwen Sun, Shanglei Jiang, Xilin Yuan, 2016 .

A circumscribed corner rounding method based on double cubic B-splines for a five-axis linear tool path

Yuwen Sun, Fuyang Xu, Fuyang Xu, 2018 .

Investigations on the automatic precision polishing of curved surfaces using a five-axis machining centre

Yuwen Sun, Huapeng Du, Deyang Feng, 2014 .

A novel adaptive-feedrate interpolation method for NURBS tool path with drive constraints

Yuwen Sun, Dongming Guo, Yuwen Sun, 2014 .

A second-order semi-discretization method for the efficient and accurate stability prediction of milling process

Yuwen Sun, Shanglei Jiang, Xilin Yuan, 2017 .

Predictive modeling of chatter stability considering force-induced deformation effect in milling thin-walled parts

Yuwen Sun, Shanglei Jiang, Yuwen Sun, 2018, International Journal of Machine Tools and Manufacture.

On the accurate calculation of milling stability limits using third-order full-discretization method

Yuwen Sun, Yan Jiang, Qiang Quo, 2012 .

Modeling and numerical simulation for the machining of helical surface profiles on cutting tools

Yuwen Sun, Jun Wang, Dongming Guo, 2008 .

A smooth curve evolution approach to the feedrate planning on five-axis toolpath with geometric and kinematic constraints

Yuwen Sun, Dongming Guo, Yuwen Sun, 2015 .