Hukam Chand Mongia

发表

Rich-lean combustor gives very low NOx

N. K. Rizk, Hukam Chand Mongia, 1990 .

Parametric Modeling Approach to Gas Turbine Combustor Design

Hukam Chand Mongia, Venkat Eswarlu Tangirala, Anil K. Tolpadi, 2000 .

Innovative Approaches for Reducing CO2 Emissions of Aviation Engines Part 3: Advanced Brayton Cycle Optimization

Vineet Kumar, Hukam Chand Mongia, Pratikash Panda, 2012 .

N+3 and N+4 Generation Aeropropulsion Engine Combustors: Part 2 — Medium Size Rich-Dome Engines and Lean-Domes

Hukam Chand Mongia, 2013 .

Instantaneous Flow Structures in a Reacting Gas Turbine Combustor

James F. Driscoll, Hukam Chand Mongia, Sulabh K. Dhanuka, 2008 .

CFD Best Practices to Predict NOx, CO and Lean Blowout for Combustor Design

Hukam Chand Mongia, Kumud Ajmani, Phil Lee, 2013 .

Validation of an advanced turbulence model with DOE film effectiveness test data on a machined ring liner

Hukam Chand Mongia, Ganesh Kumar, 2001 .

Three-Dimensional Analysis of Gas Turbine Combustors

N. K. Rizk, Hukam Chand Mongia, N. Rizk, 1991 .

Assessment of CFD Approaches for Next-Generation Combustor Design

Hukam Chand Mongia, Kumud Ajmani, Phil Lee, 2014 .

Engineering Aspects of Complex Gas Turbine Combustion Mixers Part III: 30 OPR

Hukam Chand Mongia, 2011 .

Innovative Approaches for Reducing CO2 Emissions of Aviation Engines Part 1: Selection of Promising Approaches

Vineet Kumar, Hukam Chand Mongia, Pratikash Panda, 2012 .

Innovative Approaches for Reducing CO2 Emissions of Aviation Engines Part 2: NPSS Calibration with Existing Gas Turbine Engines

Vineet Kumar, Hukam Chand Mongia, Pratikash Panda, 2012 .

Gas turbine combustor design methodology

N. K. Rizk, Hukam Chand Mongia, 1986 .

CONCEPTUAL DESIGN OF AEROPROPULSION ENGINE HEAT EXCHANGERS PART 1: MICRO CHANNELS AND SELECTION OF ADVANCED CONFIGURATIONS

Vineet Kumar, Hukam Chand Mongia, Pratikash Panda, 2013 .

CONCEPTUAL DESIGN OF AEROPROPULSION ENGINE HEAT EXCHANGERS PART 3: PRINTED CIRCUIT HEAT EXCHANGER

Vineet Kumar, Hukam Chand Mongia, Pratikash Panda, 2013 .

Swirl cup Modeling Part 1

G. S. Samuelsen, Hukam Chand Mongia, Allen Michael Danis, 2001 .

Conceptual Design of Aeropropulsion Engine Heat Exchangers Part 2: Offset Fin Micro channels

Vineet Kumar, Hukam Chand Mongia, Pratikash Panda, 2013 .

Innovative Approaches for Reducing CO2 Emissions of Aviation Engines Part 4: Turbine Exhaust Driven Thermal Secondary Cycle TED-T

Vineet Kumar, Hukam Chand Mongia, Pratikash Panda, 2012 .

Results of a DOE on the film cooling effectiveness of a modern combustor with machined ring liners

Hukam Chand Mongia, Ganesh Kumar, Beverly Stephenson Duncan, 2000 .

Assessment of advanced turbulence models and unstructured code for calculating the film effectiveness of a modern film-cooled combustor

Hukam Chand Mongia, Ganesh Kumar, 2000 .

On Continuous NOx Reduction of Aero-propulsion Engines

Hukam Chand Mongia, 2010 .

Innovative Approaches for Reducing CO2 Emissions of Aviation Engines Part 5: Turbo Reaction-Controlled internal combustion System TRCS

Vineet Kumar, Hukam Chand Mongia, Pratikash Panda, 2012 .

Challenges and Progress in Controlling Dynamics in Gas Turbine Combustors

Hukam Chand Mongia, T. J. Held, George Chia-Chun Hsiao, 2003 .