Xiang Jiang

发表

New Geometrical Filtratation For Ultra-Precision And Micro,Nano Manufactured Products

Liam Blunt, Paul J. Scott, Wenhan Zeng, 2009 .

Intelligent sampling for the measurement of structured surfaces

Jian Wang, Liam Blunt, Richard K. Leach, 2012 .

A straightness error measurement method matched new generation GPS

Xiang Jiang, X B Zhang, H Lu, 2005 .

Complex Structured Surface Characterisation by using PDE based Adaptive Nonlinear Diffusion Filter

Paul J. Scott, Shan Lou, Xiang Jiang, 2016 .

Introduction of four different drive systems used in LAMOST focal plane

Yuefei Wang, Guoping Li, Bozhong Gu, 2006, SPIE Astronomical Telescopes + Instrumentation.

Environmental robust interferometry for online/in-process surface inspection

Feng Gao, Xiang Jiang, 2017 .

Automated Bullet-Identification System Based on Surface Topography Techniques

Liam Blunt, Shaojun Xiao, Xiang Jiang, 2009 .

Approximation of Surface Texture Profiles and Parameters

Richard K. Leach, Peter M. Harris, Xiang Jiang, 2004 .

A new way to evaluate steel sheet surfaces

Liam Blunt, Taimoor Asim, Wenhan Zeng, 2009 .

Investigation of the compatibility of X-CT measurement data to surface topography analysis

Shan Lou, Xiang Jiang, Wenhan Zeng, 2016 .

An approach of assessment for ultra-precision V-groove structured surfaces

Feng Gao, Xiang Jiang, A. Mateboer, 2010 .

Simulation of Tri-sensor Deflectometry for Freeform and Structured Specular Surfaces

Feng Gao, Hongyu Ren, Xiang Jiang, 2013 .

Structured Surfaces, Measurements & Characterization

Liam Blunt, Richard K. Leach, Jian Wang, 2009 .

The roughness measurement of the super-smooth surface of hard disks

Xiang Jiang, Shuming Yang, 2006 .

The use of morphological methods for the extraction of topographical features from complex additive manufactured surfaces

Paul J. Scott, Shan Lou, Xiang Jiang, 2016 .

Structures of specification and verification knowledge-base in surface texture knowledge-based system

Paul J. Scott, Xiang Jiang, W. Yan, 2007 .

The use of interferometry and image analysis techniques for metrology of MST devices

Liam Blunt, Paul J. Scott, Shaojun Xiao, 2004 .

Efficient Decomposition of Bimatrix Games pdf

Arno Pauly, Xiang Jiang, A. Pauly, 2012, ArXiv.

Development of “softgauges” for surface profile metrology

Graeme Parkin, Liam Blunt, Richard K. Leach, 2005 .

A metrology solution for determination of form deviation and wear in orthopaedic joint replacements

Liam Blunt, Paul J. Bills, Xiang Jiang, 2006 .

An Active Contour Based Algorithm for Micro-scale Surface Feature Extraction

Liam Blunt, Xiang Jiang, Hao Zhu, 2009 .

Propagation of measurement uncertainty for surface texture parameters

Richard K. Leach, Andrew Crampton, Xiang Jiang, 2006 .

Investigation on the Noise Separation in Watt Balance Experiments

Liam Blunt, Paul J. Scott, Wenhan Zeng, 2008 .

Metrological characteristics of complex wavelettransform for surface topography analysis

Liam Blunt, Paul J. Scott, Wenhan Zeng, 2005 .

In-Situ Surface Inspection Using White Light Channelled Spectrum Interferometer

Feng Gao, Dawei Tang, Xiang Jiang, 2015 .

MEMS microstructured surface characterisation based on wavelet transform techniques

Liam Blunt, Shaojun Xiao, Xiang Jiang, 2008 .

Uncertainty In Surface Roughness Measurement

Liam Blunt, Xiang Jiang, Tukun Li, 2009 .

Preface: Discussion Meeting Issue

Paul Shore, Xiang Jiang, David J. Whitehouse, 2012 .

Geometrical characterisation of MST and microfluidicdevices using novel surface metrology techniques

Liam Blunt, Paul J. Scott, Shaojun Xiao, 2005 .

White Light Channeled Spectrum Interferometry for the On-line Surface Inspection

Feng Gao, Dawei Tang, Xiang Jiang, 2014 .

Automated ballistic and tool mark identification

Feng Gao, Liam Blunt, Xiang Jiang, 2009 .

A Boundary Segmentation Algorithm for Extracting Microscale Dimensional Parameters in the Measurement of Structured Surfaces

Jian Wang, Liam Blunt, Richard K. Leach, 2012 .

Approximation of surface roughness profiles and parameters

Richard K. Leach, Peter M. Harris, Xiang Jiang, 2005 .

Cylindrical Lenses Based Spectral Domain Low-Coherence Interferometry for On-line Surface Inspection

Feng Gao, Dawei Tang, Xiang Jiang, 2013 .

Propagation of uncertainty in discretely sampled surface roughness profiles.

Richard K. Leach, Peter M. Harris, Xiang Jiang, 2006 .

An adaptive system framework for surface characterisation.

Xiangqi Lan, Liam Blunt, Shaojun Xiao, 2009 .

Using metrology to bridge the gap in understanding between engineering and biological failure: the case of metal-on-metal hip replacements

Liam Blunt, Paul J. Bills, Xiang Jiang, 2012 .

Recognition of Features from Micro Scale Patterned Surfaces

Liam Blunt, Shaojun Xiao, Xiang Jiang, 2009 .

Tracking system of 2m LAMOST-style telescope for the Antarctic Plateau

Bozhong Gu, Heng Zuo, Xiang Jiang, 2006, SPIE Astronomical Telescopes + Instrumentation.

Morphological Component Analysis based Detection of Transient Behaviour in Environmental Vibration for the Watt Balance

Liam Blunt, Paul J. Scott, Wenhan Zeng, 2008 .

Accelerated Surface Measurement Using Wavelength Scanning Interferometer with Compensation of Environmental Noise

Feng Gao, Hussam Muhamedsalih, Xiang Jiang, 2013 .

Comparison on F2 softgauges for surfacetexture

Liam Blunt, Paul J. Scott, Shaojun Xiao, 2007 .

On the accuracy of roughness parameters

Liam Blunt, Paul J. Scott, Xiang Jiang, 2007 .

Fundamental research into the filtration of surface texture in geometric product specification and verification

Liam Blunt, Paul J. Scott, Xiang Jiang, 2002 .

Development of morphological filtering method for specification and characterisation of hip replacement taper junctions

Shan Lou, Paul J. Bills, Xiang Jiang, 2012 .

Flexible shape extraction for micro/nano scale structured surfaces.

Liam Blunt, Xiang Jiang, Hao Zhu, 2009 .

An Introduction to Morphological Filters in Surface Metrology

Paul J. Scott, Shan Lou, Xiang Jiang, 2012 .

The Research of Distributing Characteristic with Floor Exercise Champions in World Gymnastics Tournament 1934～2007

Xiang Jiang, 2008 .

Review of surface texture work in ISO

Paul J. Scott, Xiang Jiang, 2003 .

Modeling of the concepts in ISO standards for profile surface texture

Liam Blunt, Paul J. Scott, Xiang Jiang, 2010 .

Lifting wavelet for three-dimensional surface analysis

K. J. Stout, Liam Blunt, Xiang Jiang, 2001 .

Hybrid photonic chip interferometer for embedded metrology

G. Maxwell, Prashant Kumar, Xiang Jiang, 2014, Photonics West - Optoelectronic Materials and Devices.

A selective kinematics error model for on-machine measurement compensation

Duo Li, Xiang Jiang, 2017 .

Acceleration computing process in wavelength scanning interferometry

Feng Gao, Hussam Muhamedsalih, Xiang Jiang, 2011 .

Development of a lifting wavelet representation for surface characterization

K. J. Stout, Liam Blunt, Xiang Jiang, 2000, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

Complex wavelet transform for extractionof morphological features on surface topography

Liam Blunt, Jianwei Ma, Xiang Jiang, 2004 .

Multi-Scalar features extraction for the bioengineering nanoscalar surfaces on the basis of the wavelet analysis

Liam Blunt, Shaojun Xiao, Xiang Jiang, 2001 .

The Design and Use of F1 Softgauges for Validating Surface Metrology Software

Liam Blunt, Paul J. Scott, Shaojun Xiao, 2008 .

Simulation of Adaptive Sampling in Profile Measurement for Structured Surfaces

Jian Wang, Liam Blunt, Xiang Jiang, 2010 .

THE BEAM PROPAGATION METHOD USED FOR THE DESIGN OF AN INTEGRATED OPTICAL COUPLER

Shuming Yang, Xiang Jiang, 2007 .

Paradigm shifts in surface metrology. Part I. Historical philosophy

Liam Blunt, Xiang Jiang, David J. Whitehouse, 2007, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

Fabrication of z-axis accelerometer with galvanic etch stop and antifuse isolation

Yuelin Wang, Xinxin Li, Heng Yang, 2013, 2013 IEEE SENSORS.

A Preliminary Investigation on Surface Roughness Assessment of Complex Additive Manufactured Parts Scanned by X-ray Computed Tomography

Shan Lou, Wenhan Zeng, Xiang Jiang, 2017 .

Introduction: Ultra-precision engineering: from physics to manufacturing

Paul Shore, Xiang Jiang, David J. Whitehouse, 2012 .

Paradigm shifts in surface metrology. Part II. The current shift

Liam Blunt, Paul J. Scott, Xiang Jiang, 2007, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

Simulation study of a refined approach for specular surfaces reconstruction in deflectometry

Feng Gao, Hongyu Ren, Xiang Jiang, 2016 .

Characterisation Platform For Surface Metrology

Liam Blunt, Xiangqi Lan, Shaojun Xiao, 2009 .

Automotive Diesel Engine Performance and Condition Monitoring using Downpipe Acoustic Waveform Analysis

Fengshou Gu, Andrew Ball, Xiang Jiang, 2008 .

Simultaneous Multi-type Feature Separation for Complex Structured Surface Analysis

Paul J. Scott, Shan Lou, Xiang Jiang, 2017 .

The development of user-friendly software measurement standards for surface topography software assessment

Liam Blunt, Richard K. Leach, Peter M. Harris, 2008 .

Efficient Decomposition of Bimatrix Games (Extended Abstract)

Arno Pauly, Xiang Jiang, A. Pauly, 2014, SR.

Comparative study between online and offline defect assessment methods for roll to roll flexible PV modules

Liam Blunt, Mohamed Elrawemi, Hussam Muhamedsalih, 2014 .

A New Approach to Surface Metrology - Structured Surfaces

Liam Blunt, Paul J. Scott, Xiang Jiang, 2007 .

The influence of bone cement type on production of fretting wear on the femoral stem surface: a preliminary study.

Liam Blunt, Simon Barrans, Leigh Fleming, 2012, Clinical biomechanics.

Experimental Investigation of the Machined Surface Waviness, Vibrations and Cutting Forces in Peripheral Milling

Andrew P. Longstaff, Liam Blunt, Kai Cheng, 2004 .

A Fast Algorithm for the High Order Linear and Nonlinear Gaussian Regression filter

Liam Blunt, Paul J. Scott, Shaojun Xiao, 2009 .

Comparison study of the biorthogonal spline wavelet filtering for areal rough surfaces

Liam Blunt, Paul J. Scott, Shaojun Xiao, 2001 .

An interferometric auto-focusing method for on-line defect assessment on a roll-to-roll process using wavelength scanning interferometry

Liam Blunt, Mohamed Elrawemi, Hussam Muhamedsalih, 2014 .

A Generalised Linear and Nonlinear Spline filter

Paul J. Scott, Xiang Jiang, Wenhan Zeng, 2011 .

Application of the Lifting Wavelet to Rough Surfaces

Liam Blunt, K. J. Stout, Xiang Jiang, 2001 .

Diffusion filtration for the evaluation of MEMs surface

Liam Blunt, Paul J. Scott, Xiang Jiang, 2012 .

Feature Extraction for Structured Surface Based on Surface Networks and Edge Detection

Liam Blunt, Paul J. Scott, Shaojun Xiao, 2006 .

The application of optics polishing to free form knee implants

Liam Blunt, Xiang Jiang, Phillip Charlton, 2006 .

Development of a technique for accurately determining clinical wear in explanted total hip replacements

Liam Blunt, Xiang Jiang, Paul J. Bills, 2007 .

Roundness filtration by using a robust regression filter

Paul J. Scott, Xiang Jiang, Wenhan Zeng, 2011 .

Developments in 3D surface metrology

K. J. Stout, Xiang Jiang, L. Blunt, 1970 .

On characterising surface topography of metal powder bed fusion additive manufactured parts

Liam Blunt, Shan Lou, Xiang Jiang, 2016 .

Surface characterisation-based tool wear monitoring in peripheral milling

Liam Blunt, Xiang Jiang, Wenhan Zeng, 2009 .

Advances in Micro and Nano-Scale Surface Metrology

Liam Blunt, Paul J. Scott, Xiang Jiang, 2005 .

A new free-form surface fitting method for precision coordinate metrology

Paul J. Scott, Xiang Jiang, Xiangchao Zhang, 2009 .

Volumetric wear assessment of retrieved metal-on-metal hip prostheses and the impact of measurement uncertainty

Liam Blunt, Xiang Jiang, Paul J. Bills, 2012 .