Exposition

发表

Exposition, 1983 .

Worldwide trends in engine coolants, cooling system materials and testing

Exposition, 1990 .

Porous, cellular and microcellular materials 2000 : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida

Vipin Kumar, Exposition, Vipin Kumar, 2000 .

Application of porous media methods for engineered materials : presented at the 1999 ASME International mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee

Exposition, Roy M. Sullivan, 1999 .

Recent advances in solids and structures, 1995 : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Piping Division, Exposition, H. Chung, 1995 .

APEC '99 : Fourteenth Annual Applied Power Electronics Conference and Exposition : 1999 conference proceedings, 14-18 March 1999, Adam's Mark Hotel-Dallas, Dallas, Texas, USA

Exposition, 1999 .

Heat treating, proceedings of the 16th conference : the 16th Heat Treating Society Conference and Exposition, 19-21 March 1996, Cincinnati Convention Center. Cincinnati, Ohio

Exposition, 1996 .

Safety engineering and risk analysis 2001 : presented at the 2001 ASME International Mechanical Engineering Congress and Exposition, November 11-16, 2001, New York, New York

Exposition, Ben J. M. Ale, 2001 .

Micro-electro-mechanical systems (MEMS) 1998 : presented at the 1998 International Mechanical Engineering Congress and Exposition : November 15-20, 1998, Anaheim, California

Exposition, Control Division, Liwei Lin, 1998 .

2002 advances in bioengineering : presented at the 2002 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 2002, New Orleans, Louisiana

Exposition, Elaine P. Scott, 2002 .

Sensing, modeling, and simulation in emerging electronic packaging : presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia

Exposition, Chao-Pin Yeh, Charles Ume, 1996 .

Thick composites for load bearing structures : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee

Exposition, Y. Rajapakse, George A. Kardomateas, 1999 .

Concurrent product design and environmentally conscious manufacturing : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas

Exposition, Samir B. Billatos, Hung-chʿao Chang, 1997 .

Mechanical behavior of advanced materials : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California

Exposition, Daniel Davis, 1998 .

Processing and design of multicomponent materials : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida

Exposition, M. C. Altan, 2000 .

Vibration and noise control : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California

H. S. Tzou, Exposition, Control Division, 1998 .

Proceedings of the ASME Noise Control and Acoustics Division : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition : November 12-17, 1995, San Francisco, California

Exposition, Richard C. Marboe, Acoustics Division, 1995 .

Development, validation, and application of inelastic methods for structural analysis and design : presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia

Piping Division, Exposition, R. F. Sammataro, 1996 .

Applications of experimental mechanics to electronic packaging 1997 : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas

Exposition, J. C. Suhling, K. M. Liechti, 1997 .

Advances in heat and mass transfer in biotechnology : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, Linda J. Hayes, 1995 .

Rheology and fluid mechanics of nonlinear materials 2000 : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida

Exposition, Dennis A. Siginer, Daniel De Kee, 2000 .

APEC '96 : Eleventh Annual Applied Power Electronics Conference and Exposition : conference proceedings 1996, March 3-7, 1996, San Jose, CA Fairmont Hotel

Exposition, 1996 .

Proceedings of the ASME Nuclear Engineering Division 1998 : CFD and thermal hydraulic analysis in nuclear reactors : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California

Exposition, Y. A. Hassan, Chun H. Cho, 1998 .

CECON '83 record : Cleveland Electrical/Electronics Conference and Exposition, 1983, Cleveland Engineering Center, Cleveland, Ohio, October 4-5, 1983

Exposition, Cleveland Electrical, 1983 .

Composites and functionally graded materials : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas

Exposition, T. S. Srivatsan, 1997 .

Safety engineering and risk analysis, 1995 : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, David W. Pyatt, 1995 .

Recent advances in electric vehicle technology

Exposition, 1989 .

New Orleans Cable '91 : the national show : proceedings from ten technical sessions : 40th Annual Convention and Exposition of the National Cable Television Association, March 24-27, 1991, New Orleans, Louisiana

Exposition, Katherine Rutkowski, 1991 .

Technical solutions to alternative transportation problems

Exposition, 1996 .

General Aviation Aircraft Aerodynamics

Exposition, General Aviation Aircraft Meeting, 1985 .

Electronic control and monitoring of off-highway equipment

Exposition, 1982 .

Applied mechanics and biomedical technology, 2002 : presented at the 2002 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 2002, New Orleans, Louisiana

Exposition, 2002 .

Proceedings of the ASME Heat Transfer and Fluids Engineering Divisions : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, J. W. Hoyt, 1995 .

Effects of processing on properties of advanced ceramics : presented at the 2001 ASME International Mechanical Engineering Congress and Exposition, November 11-16, 2001, New York, New York

Exposition, Devdas Pai, Jagannathan Sankar, 2001 .

Partnering to succeed: keys to managing technology development, risk and globalization : presented at the 2001 ASME International Mechanical Engineering Congress and Exposition, November 11-16, 2001, New York, New York

Exposition, 本田博, 2001 .

Proceedings of the ASME Advanced Energy Systems Division : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas

Exposition, Daniel T. Valentine, Craig C. Jahnke, 1997 .

Adaptive structures and material systems 1999 : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee

Exposition, James M. Redmond, Greg Washington, 1999 .

Safety engineering and risk analysis, 1996 : presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia

Exposition, F. J. Mintz, 1996 .

Transaction: making tracks for tomorrow's transportation : presented at the 2002 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 2002, New Orleans, Louisiana

Exposition, S. K. Punwani, 2002 .

Emerging technologies : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, George A. Hazelrigg, T. J. Bennett, 1995 .

Transport phenomena in materials processing and manufacturing, 1996 : presented at the 1996 International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia

Exposition, Adrienne S. Lavine, 1996 .

Dynamics, acoustics, and simulations : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California

Exposition, Ray P. S. Han, Albert C. J. Luo, 1998 .

Nonlinear dynamics and stochastic mechanics : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida

Exposition, Wei-Chau Xie, 2000 .

Proceedings of the 5th International Symposium on Fluid-structure Interaction, Aeroelasticity, Flow-Induced Vibration and Noise : presented at the 2002 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 2002, New Orleans, Louisiana

Exposition, 日本機械学会, M. P. Paidoussis, 2002 .

Sensors in electronic packaging : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, Charles Ume, Pin-Yeh Chao, 1995 .

Heat transfer in turbulent flows 1995 : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

R. S. Amano, Exposition, N. K. Anand, 1995 .

Fluid power systems and technology : collected papers

Exposition, 1994 .

Combustion, fire, and computational modeling of industrial combustion systems : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November, 5-10, 2000, Orlando, Florida

Exposition, Cary Presser, Ashwani K. Gupta, 2000 .

Computers in engineering 1990 : proceedings of the 1990 ASME International Computers in Engineering Conference and Exposition, August 5-9 1990, Boston, Massachusetts

Exposition, G. L. Kinzel, S. M. Rohde, 1990 .

Rail transportation 2000 : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orland, Florida

Exposition, Swamidas K. Punwani, 2000 .

Progress and productivity through computer graphics : proceedings of the Second Annual Conference & Exhibition of the National Computer Graphics Association ,Inc., Baltimore Convention Center, Baltimore, Maryland, June 14-18, 1981

Exposition, Robert T. Aangeenbrug, W. Michael Garner, 1981 .

Manufacturing science and engineering, 1998 : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California

Jay Lee, Exposition, 1998 .

Manufacturing science and engineering, 1997 : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas

Exposition, Control Division, G. J. Wiens, 1997 .

Reliability, stress analysis, and failure prevention issues in adhesive and bolted connections : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999 , Nashville, Tennessee

Exposition, Erol Sancaktar, 1999 .

CAE/CAD and thermal management issues in electronic systems : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas

Exposition, D. Agonafer, 1997 .

Manufacturing science and engineering, 1999 : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee

Exposition, John W. Sutherland, John W. Sutherland, 1999 .

Fluid power systems and technology, 1999 : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1998, Nashville, Tennessee

Exposition, Tim McLain, Sanjay I. Mistry, 1999 .

Proceedings of the ASME Fluids Engineering Division 2001 : presented at the 2001 ASME International Mechanical Engineering Congress and Exposition, November 11-16, 2001, New York, New York

Exposition, Upendra S. Rohatgi, George Papadopoulos, 2001 .

Developments and applications of non-Newtonian flows, 1995 : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, Dennis A. Siginer, Hsin-Pang Wang, 1995 .

Innovations in engineering education--2006 : mechanical engineering education, mechanical engineering technology, department heads : presented at 2006 ASME International Mechanical Engineering Congress and Exposition : November 5-10, 2006, Chicago, Illinois USA

Exposition, 2005 .

Microelectromechanical systems (MEMS) : presented at 1996 International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia

Exposition, Control Division, 1996 .

Electronic and photonic packaging, electrical systems and photonic design, and nanotechnology 2002 : presented at the 2002 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 2002, New Orleans, Louisiana

Exposition, Photonic Packaging Division, 2002 .

Manufacturing science and engineering, 1996 : presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia

Exposition, Jian Dong, K. Subramanian, 1996 .

Aerodynamics : recent developments

Exposition, 1986 .

Vibration and control of continuous systems : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida

Exposition, Jonathan A. Wickert, Christopher D. Rahn, 2000 .

Adaptive structures and materials systems, 1997 : the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas

Exposition, James S. Sirkis, Diann Brei, 1997 .

Advances in heat and mass transfer in biotechnology, 2000 : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida

Exposition, John C. Bischof, Elaine P. Scott, 2000 .

Society for Biomaterials Annual Meeting and Exposition 2014 : pioneering the future of biomaterials : transactions of the 38th Annual Meeting : volume XXXVI : Denver, Colorado, USA 16-19 April 2014

Exposition, 2014 .

APEC 2004 : nineteenth annual IEEE Applied Power Electronics Conference and Exposition, 22-26 February 2004, The Disneyland Hotel, Anaheim, California

Exposition, 2004 .

Technology shaping the future : IEEE EASCON '83 16th Annual Electronics and Aerospace Conference and Exposition : the Shoreham Hotel, Washington, D.C., September 19-21, 1983

Ieee Aerospace, Exposition, 1983 .

Electric/hybrid vehicles : alternative powerplants, energy management, and battery technology

Exposition, 1997 .

Crashworthiness and occupant protection in transportation systems 1995 : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, John D. Reid, J. Reid, 1995 .

Rheology and fluid mechanics of nonlinear materials 2001 : presented at the 2001 ASME International Mechanical Engineering Congress and Exposition, November 11-16, 2001, New York, New York

Exposition, Dennis A. Siginer, Sayavuri I. Bakhtivarov, 2001 .

APEC '90 : Fifth Annual IEEE Applied Power Electronics Conference and Exposition : conference proceedings 1990, March 11-16, 1990, The Biltmore Hotel, Los Angeles, California

Exposition, 1990 .

Fracture and failure : analyses, mechanisms, and applications : proceedings of the American Society for Metals fracture and failure sessions at the 1980 Western Metal and Tool Exposition and Conference (WESTEC), 17-20 March, 1980, Los Angeles, California

Exposition, Paul P. Tung, Western Metal, 1981 .

Proceedings of the ASME Aerospace and Materials Divisions

Exposition, Wen S. Chan, 1996 .

Rail transportation 2002 : presented at the 2002 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 2002, New Orleans, Louisiana

Exposition, David L. Cackovic, 2002 .

Safety engineering and risk analysis, 1998 : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition : November 15-20, 1998, Anaheim, California

Exposition, David W. Pyatt, 1998 .

Automobile safety : present and future technology

Exposition, 1992 .

Proceedings of the ASME : Applied Mechanics Division 2004 : presented at 2004 ASME International Mechanical Engineering Congress and Exposition, November 13-19, 2004, Anaheim, California USA

Exposition, 2004 .

Advances in heat and mass transfer in biotechnology, 1998 : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California

Exposition, Scott Clegg, 1998 .

Reliability, stress analysis, and failure prevention issues : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida

Exposition, Erol Sancaktar, 2000 .

Proceedings of the 35th Annual American Society of Safety Engineers Professional Development Conference, June 23-28, 1996, San Diego Convention Center, San Diego, California

Exposition, 1996 .

Dynamic characteristics of today's passenger car transmissions

Exposition, Passenger Car Meeting, 1990 .

Recent advances in mechanics of solids and structures, 2003 : presented at the 2003 ASME International Mechanical Engineering Congress, November 15-21, 2003 Washington, D.C.

Piping Division, Exposition, H. Chung, 2003 .

Manufacturing science and engineering, 1995 : presented at 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, E. Kannatey-Asibu, 1995 .

Design innovations in alternative fuels technologies

Exposition, 1996 .

Flow noise modeling, measurement and control, 1995 : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition : November 12-17, 1995, San Francisco, California

Exposition, Richard M. Lueptow, Acoustics Division, 1995 .

Cooling and thermal design of electronic systems : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, Cristina H. Amon, 1995 .

Adaptive Structures and Material Systems 2002 : presented at the 2002 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 2002, New Orleans, Louisiana

Exposition, 2002 .

ASME Applied Mechanics Division book of abstracts : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997

Exposition, S. Kyriakides, 1997 .

Transmission and driveline noise

Exposition, 1982 .

Crashworthiness and occupant protection in transportation systems, 1996 : presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia

Exposition, Hikmat F. Mahmood, Mohamed Ridha Baccouche, 1996 .

Dynamics, acoustics and simulations : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida

Exposition, Control Division, Ray P. S. Han, 2000 .

Advances in failure mechanisms in brittle materials : presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia

Exposition, R. J. Clifton, H. D. Espinosa, 1996 .

The science, automation, and control of material processes involving coupled transport and rheology changes : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennesse

Exposition, Olusegun J. Ilegbusi, 1999 .

Proceedings of the ASME Fluids Engineering Division 1999 : general topics in fluids engineering, forum on industrial compressors ... : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee

Exposition, David E. Stock, 1999 .

CFD for design and optimization : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, Oktay Baysal, 1995 .

Recent advances in solids and structures 2002 : presented at the 2002 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 2002, New Orleans, Louisiana

Piping Division, Exposition, H. Chung, 2002 .

Proceedings of the ASME Aerospace Division : structures and materials for aerospace vehicles, adaptive structures and material systems, micro-electro-mechanical systems (MEMS)--invited papers

Exposition, C. I. Chang, 1996 .

Recent advances in solids/structures and Application of metallic materials, 1997 : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas

Piping Division, Exposition, Young W. Kwon, 1997 .

Micro-electro-mechanical systems (MEMS) 1999 : presented at the 1999 International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee

Exposition, Abraham P. Lee, 1999 .

Advances in heat and mass transfer in biotechnology, 1997 : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas

Exposition, Scott Clegg, 1997 .

Electrical and electronic measurement and test instrument conference and exposition, Ottawa, Canada

Exposition, Electronic Measurement, 1981 .

IVHS issues and technology

Exposition, 1992 .

Mechanics of sandwich structures : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida

Exposition, Y. Rajapakse, 2000 .

Proceedings of the ASME Pressure Vessels and Piping Division 2004 : 2004 forum on fluid transients, recent advances in solids and structures : presented at 2004 ASME International Mechanical Engineering Congress and Exposition, November 13-19, 2004, Anaheim, California, USA

Piping Division, Exposition, 2004 .

Mechanics of plastics and plastic composites 1995 : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, Mary C. Boyce, 1995 .

Conceptual and innovative design for manufacturing : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee

Exposition, Samir B. Billatos, Byoung Sung Kim, 1999 .

APEC '95 : Tenth Annual Applied Power Electronics Conference and Exposition : conference proceedings 1995, March 5-9, 1995, Hyatt regency Dallas

Exposition, 1995 .

The potential of earth-sheltered and underground space : today's resource for tomorrow's space and energy viability : proceedings of the Underground Space Conference and Exposition, Kansas City, Missouri, June 8-10, 1981

Exposition, T. Lance Holthusen, 1981 .

Rheology and fluid mechanics of nonlinear materials 1999 : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee

Exposition, Dennis A. Siginer, 1999 .

Technology and society and engineering business management 2002 : presented at the 2002 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 2002, New Orleans, Louisiana

Exposition, 本田博, 2002 .

Proceedings of the ASME Fluids Engineering Division 2000 : dispersed flows in combustion, incineration and propulsion systems, multiphase flow industrial applications ... : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida

Exposition, Timothy J. O'Hern, 2000 .

Concurrent product and process engineering : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, Samir B. Billatos, Rajit Gadh, 1995 .

Dynamic failure in composite materials and structures : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida

Exposition, C. T. Sun, Y. Rajapakse, 2000 .

Technical proceedings, the 31st Annual Conference and Exposition, SOLE '96 : logistics: the future is now, Washington, DC. 27-29 August '96

Exposition, 1996 .

Proceedings of the ASME Heat Transfer Division : presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia

Exposition, 1996 .

Electronic and photonic packaging, integration and packaging of micro/nano/electronic systems - 2005 : presented at the 2005 ASME International Mechanical Engineering Congress and Exposition : November 5-11, 2005, Orland, Florida USA

Exposition, Photonic Packaging Division, 2005 .

Fluid power systems and technology, 2000 : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida

Exposition, Tim McLain, D. Kim, 2000 .

Rail transportation, 1995 : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, Ronald R. Newman, 1995 .

APEC 2001 : Sixteenth Annual IEEE : Applied Power Electronics Conference and Exposition : 4-8 March 2001, Disneyland Hotel, Anaheim, California

Exposition, 2001 .

Mechanical engineering design education: issues and case studies : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee

Exposition, Edmund C. Feldy, 1999 .

Micro-electro-mechanical systems (MEMS) 2000 : presented at 2000 International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orland, Florida

Exposition, Abraham P. Lee, 2000 .

Application of fracture mechanics in electronic packaging : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas

Exposition, D. T. Read, William T. Chen, 1997 .

Magnetic levitation technology and transportation strategies

Exposition, 1990 .

Recent advances in automotive electronics

Exposition, 1977 .

Computational methods for solution of inverse problems in mechanics : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition : November 15-20, 1998, Anaheim, California

Exposition, Lorraine G. Olson, Sunil Saigal, 1998 .

Proceedings of the 32nd Annual American Society of Safety Engineers Professional Development Conference, June 20-23, 1993, Loews Anatole Hotel, Dallas, Texas

Exposition, 1993 .

Crashworthiness of composites and lightweight structures : presented at the 2001 ASME International Mechanical Engineering Congress and Exposition, November 11-16, 2001, New York, New York

Exposition, Golam Newaz, Omar Faruque, 2001 .

Advances in heat and mass transfer in biotechnology, 1999 : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee

Exposition, Elaine P. Scott, 1999 .

Proceedings of the ASME Noise Control and Acoustics Division : presented at the ... ASME International Mechanical Engineering Congress and Exposition

Exposition, Acoustics Division, Acoustics Division, 1995 .

Advanced materials in future transportation design

Exposition, 1988 .

State-of-the-art on design and performance of diesel power cylinder components

Exposition, 1983 .

Proceedings of the ASME Materials Division : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, D. C. Wiggert, 1995 .

Packaging, reliability and manufacturing issues associated with electronic and photonic products : presented at the 2001 ASME International Mechanical Engineering Congress and Exposition, November 11-16, 2001, New York, New York

Exposition, I. Charles Ume, 2001 .

Proceedings of the ASME Advanced Energy Systems Division--1999 : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition : November 14-19, 1999, Nashville, Tennessee

Exposition, Salvador M. Aceves, 1999 .

Damage initiation and prediction in comosites, sandwich structures and thermal barrier coatings : presented at the 2001 ASME International Mechanical Engineering Congress and Exposition, November 11-16, 2001, New York, New York

Exposition, Anthony M. Waas, J. D. Whitcomb, 2001 .

2000 advances in bioengineering : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida

Exposition, Ted A. Conway, 2000 .

Advanced vehicle technologies : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida

Exposition, I. Haque, 2000 .

Advances in heat and mass transfer in biotechnology 2002 : presented at the 2002 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 2002, New Orleans, Louisiana

Exposition, Yıldız Bayazıtoğlu, 2002 .

National Cable Television Association 1994 technical papers : 43rd Annual NCTA Convention and Exposition, New Orleans, Louisiana, May 22-25, 1994

Exposition, Katherine Rutkowski, 1994 .

Innovations in engineering education--2004 : presented at 2004 ASME International Mechanical Engineering Congress and Exposition : November 13-19, 2004, Anaheim, California, USA

Exposition, 2004 .

Advances in energy efficiency, heat/mass transfer enhancement : presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia

Exposition, M. M. Ohadi, S. V. Dessiatoun, 1996 .

Composites for general aviation aircraft

Exposition, Sae General Aviation Aircraft Meeting, 1987 .

Risk and safety assessments : building viable solutions : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Piping Division, Exposition, F. L. Cho, 1995 .

Recent trends in constitutive modeling of advanced materials : presented at the 2000 ASME International mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida

Exposition, Marwan K. Khraisheh, 2000 .

Society for Biomaterials Annual Meeting and Exposition 2015 : driving biomaterial innovation and the race to translation : transactions of the 39th Annual Meeting : volume XXXVII : Charlotte, North Carolina, USA 15-18 April 2015

Exposition, 2015 .

Proceedings of the ASME Advanced Energy Systems Division : presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia

Exposition, Robert R. Bittle, 1996 .

Dynamic failure in composite materials and structures : presented at the 2001 ASME International Mechanical Engineering Congress and Exposition, November 11-16, 2001, New York, New York

Exposition, Y. Rajapakse, 2001 .

4th International Symposium on Fluid-Structure Interactions, Aeroelasticity, Flow-Induced Vibration and Noise : presented at the 1997 International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas

Exposition, M. P. Paidoussis, M. Paidoussis, 1997 .

Microelectromechanical systems (MEMS) 1997 : micromechanical systems, microscale energy transport : presented at the 1997 International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas

Exposition, Control Division, W. S. Chang, 1997 .

Adaptive Structures and Material Systems 2000 : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 2-10, 2000, Orlando, Florida

John A. Main, Exposition, James M. Redmond, 2000 .

APEC '98 : Thirteenth Annual Applied Power Electronics Conference and Exposition : conference proceedings 1998, February 15-19, 1998, the Disneyland Hotel, Anaheim, California

Exposition, 1998 .

Heat treating and surface engineering : proceedings of the 22nd Heat Treating Society Conference and the 2nd International Surface Engineering Congress : 15-17 September, 2003, Indianapolis, Indiana, USA

Exposition, Narendra B. Dahotre, 2003 .

Successfully managing, the risk development of your business and technology : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida

Exposition, Honda Hiroshi, Honda Hiroshi, 2000 .

NDE chellenges of the 21st century: theory to practice : presented at the 2001 ASME Mechanical Engineering Congress andd Exposition, November 11-16, 2001, New York, New York

Exposition, Cetin Cetinkaya, 2001 .

Mechanical engineering design education 2001: issues and case studies : presented at the 2001 ASME International Mechanical Engineering Congress and Exposition, November 11-16, 2001, New York, New York

Exposition, Edmund C. Feldy, 2001 .

Conference digest, International Electrical, Electronics Conference & Exposition, October 5, 6, &, 7, 1981, Automotive Building, Exhibition Place, Toronto, Canada

Exposition, 1981 .

Crashworthiness, occupant protection, and biomechanics in transportation systems--1998 : presented at the 1998 ASME International Mechnical Engineering Congress and Exposition : November 15-20, 1998, Anaheim, California

Exposition, Saeed David Barbat, Hikmat F. Mahmood, 1998 .

Challenges and goals in industrial and pipeline compressors : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida

Exposition, Abraham Engeda, 2000 .

IEEE 1977 International Electrical, Electronics Conference

Exposition, 1977 .

Proceedings of the ASME Fluids Engineering Division : presented at the 1996 International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia

Exposition, Othon K. Rediniotis, 1996 .

Net shape processing of powder materials : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, Sriram Krishnaswami, Robert M. McMeeking, 1995 .

FOC/LAN '87 & MFOC-West proceedings : papers presented at: the eleventh Annual International Fiber Optic Communications and Local Area Networks Exposition including MFOC-WEST, 26-30 October, 1987, Anaheim Convention Center, Anaheim, California

Exposition, Berbe Kennelly Polishuk, 1987 .

Advances in enhanced heat transfer 2000 : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida

Exposition, Raj M. Manglik, 2000 .

Cellular and microcellular materials : presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia

Vipin Kumar, Exposition, Karl A. Seeler, 1996 .

Vehicle/highway automation : technology and policy issues

Exposition, 1989 .

1977 Control of Power Systems Conference and Exposition : conference record : a national conference, March 14-15-16, 1977

Exposition, Houston Section Ieee, 1977 .

Electronics manufacturing issues : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee

Exposition, Chittaranjan Sahat, 1999 .

Crashworthiness, occupant protection, and biomechanics in transportation systems 1999 : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee

Exposition, Saeed David Barbat, Hikmat F. Mahmood, 1997 .

Application of fracture mechanics in electronic packaging and materials : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, Tien Y. Wu, 1995 .

Advances in enhanced heat/mass transfer and energy efficiency : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, J. C. Conklin, M. M. Ohadi, 1995 .

Thermal science of advanced steam generators/heat exchangers : presented at the 1996 International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia

Exposition, Y. A. Hassan, S. Beus, 1996 .

Fluid power systems and technology 2002 : presented at the 2002 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 2002, New Orleans, Louisiana

Exposition, Dean Kim, Noa Manring, 2002 .

Durability by design : integrated approaches to mechanical durability assurance of ground vehicles

Exposition, Passenger Car Meeting, 1988 .

Advances in heat and mass transfer in biotechnology, 1996 : presented at the 1996 International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia

Exposition, Linda J. Hayes, Scott Clegg, 1996 .

Polymeric systems : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennesse

Exposition, K. Ramani, A. Saigal, 1999 .

Durability and damage tolerance of composite materials and structures 1999 : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee

Exposition, Assimina A. Pelegri, 1999 .

1999 advances in bioengineering : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee

Exposition, Jennifer S. Wayne, 1999 .

Fatigue and fracture at elevated temperatures : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, Arvind Nagar, S. Mall, 1995 .

Recent advances in solids and structures, 1999 : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee

Piping Division, Exposition, H. Chung, 1999 .

APEC '91 : Sixth Annual IEEE Applied Power Electronics Conference and Exposition : conference proceedings 1991, March 10-15, 1991, Hyatt Regency, Dallas, Texas

Exposition, 1991 .

Active/passive vibration control and nonlinear dynamics of structures : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas

Exposition, W. W. Clark, 1997 .

Heat pump and refrigeration systems design, analysis, and applications, 1995 : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, Dennis O'Neal, 1995 .

Structural analysis in microelectronic and fiber optic systems : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, Ephraim Suhir, 1991 .

Accident reconstruction : automobiles, tractor-semitrailers, motorcycles, and pedestrians

Exposition, 1987 .

Reliability, stress analysis, and failure prevention issues in adhesively bonded and bolted joints, composites design : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas

Exposition, Erol Sancaktar, 1997 .

Mechanics in biology : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida

Exposition, James Casey, Gang Bao, 2000 .

Safety engineering and risk analysis, 1999 : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition : November 14-19, 1999, Nashville, Tennessee

Exposition, John L. Boccio, 1999 .

Engineering systems : presented at the 1996 International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia

Exposition, Control Division, R. Shoureshi, 1996 .

Application of CAE/CAD to electronic systems : presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia

Exposition, D. Agonafer, 1996 .

Proceedings of the ASME Advanced Energy Systems Division--1998 : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition : November 15-20, 1998, Anaheim, California

Exposition, M. Metghalchi, 1998 .

Proceedings of the ASME Advanced Energy Systems Division--2000 : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition : November 5-10, 2000, Orlando, Florida

Exposition, Srinivas Garimella, 2000 .

Applications of experimental mechanics to electronic packaging : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, J. C. Suhling, 1995 .

Proceedings of the ASME Heat Transfer Division 2000 : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida

Exposition, Jong H. Kim, 2000 .

Structural analysis in microelectronics and fiber optics, 1996 : presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia

Ephraim Suhir, Exposition, 1996 .

Packaging of electronic and photonic devices : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November, 5-10, 2000, Orlando, Florida

Exposition, G. J. Kowalski, 2000 .

Energy efficient building design technical papers : fifth international energy efficient building conference and exposition : April 10 nad 11, 1987, Minneapolis, Minnesota

Exposition, 1987 .

Electronic and photonics packaging : multi-scale electrical and mechanical systems : presented at 2006 ASME International Mechanical Engineering Congress and Exposition : November 5-10, 2006, Chicago, Illinois USA

Exposition, Photonic Packaging Division, 2007 .

Computers in engineering 1989 : proceedings of the 1989 ASME International Computers in Engineering Conference and Exposition, July 30-August 3, 1989, Anaheim, California

Exposition, T. J. Cokonis, D. R. Riley, 1989 .

Control of vibration and noise : new millennium : presented at the 2000 ASME international mechanical engineering congress and exposition November, 5-10, 2000, Orlando, Florida

H. S. Tzou, Exposition, 2000 .

Composites : design and manufacturing for general aviation aircraft

Exposition, General Aviation Aircraft Meeting, 1985 .

Thermodynamics and the design, analysis, and improvement of energy systems 1995 : presented at 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995

Exposition, Robert J. Krane, 1995 .

Three-dimensional effects in composite and sandwich structures : presented at the 2001 ASME International Mechanical Engineering Congress and Exposition, November 11-16, 2001, New York, New York

Exposition, Y. Rajapakse, 2001 .

Excellence in Housing '88 : abstracts & technical papers : sixth Annual International Energy Efficient Building Conference and Exposition, April 28 and 29, 1988, Portland, Maine, USA

Exposition, 1988 .

Computational fluid dynamics in aeropropulsion : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, K. W. Ng, 1995 .

Dallas Cable '92 : the national show : proceedings from twelve technical sessions : 41st Annual Convention and Exposition of the National Cable Television Association, May 3-6, 1992, Dallas, Texas

Exposition, Katherine Rutkowski, 1992 .

Advances in aerospace materials and structures : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee

Exposition, Golam Newaz, 1999 .

Emerging technologies for machinery health monitoring and prognosis : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas

Exposition, Richard S. Cowan, 1997 .

APEC '97 : Twelfth Annual Applied Power Electronics Conference and Exposition : conference proceedings 1997, February 23-27, 1997, Atlanta, Georgia, Westin Peachtree Plaza Hotel

Exposition, 1997 .

APEC 2002 : Seventeenth Annual IEEE Applied Power Electronics Conference and Exposition, 10-14 March 2002, Adam's Mark Hotel, Dallas, Texas

Exposition, 2002 .

Fluid power systems and technology 1998 collected papers : presented at 1998 ASME International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California

Exposition, Control Division, Satish S. Nair, 1996 .

Worldwide emission control : automotive catalysts

Exposition, Lubricants Meeting, 1985 .

Recent advances in solids and structures 2005 : presented at 2005 ASME International Mechanical Engineering Congress and Exposition, November 5-11, 2005, Orlando, Florida USA

Piping Division, Exposition, H. Chung, 2000 .

Rheology and fluid mechanics of nonlinear materials, 1998 : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California

Exposition, Suresh G. Advani, Dennis A. Siginer, 1996 .

Analysis and design issues for modern aerospace vehicles, 1997 : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas

Exposition, George J. Simitses, 1997 .

Rail transportation, 1996 : presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia

Exposition, Daniel H. Stone, 1996 .

Proceedings of the ASME Noise Control and Acoustics Division--1998 : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition : November 15-20, 1998, Anaheim, California

Exposition, Acoustics Division, Mardi C. Hastings, 1998 .

Proceedings of the ASME Manufacturing Engineering Division, 2000 : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida

Exposition, R. J. Furness, 2000 .

Proceedings of the ASME Noise Control and Acoustics Division : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition : November 16-21, 1997, Dallas, Tex.

Exposition, Acoustics Division, Raymond J. Nagem, 1997 .

Porous, cellular and microcellular materials : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California

Vipin Kumar, Exposition, 1998 .

Applications of x-rays in mechanical engineering--2004 : presented at 2004 ASME International Mechanical Engineering Congress and Exposition : November 13-19, 2004, Anaheim, California, USA

Exposition, 2004 .

Safety engineering and risk analysis 2000 : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida

Exposition, William W. Doerr, 2000 .

Nondestructive evaluation and characterization of engineering materials for reliability and durability predictions : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000 Orlando, Florida

Tribikram Kundu, Exposition, Jianmin Qu, 2000 .

Structural integrity in aging aircraft : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, C. T. Sun, Jim C. I. Chang, 1995 .

Safety engineering and risk analysis 2002 : presented at the 2002 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 2002, New Orleans, Louisiana

Exposition, Ben J. M. Ale, 2002 .

APEC 2003 : eighteenth annual IEEE Applied Power Electronics Conference and Exposition, 9-13 February 2003, Fontainebleau Hotel, Miami Beach, Florida

Exposition, 2003 .

Cae and intelligent processing of polymeric materials : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas

Exposition, Hsin-Pang Wang, Karl A. Seeler, 1997 .

Recent advances in mechanics of aerospace structures and materials, 1998 : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California

Exposition, Bhavani V. Sankar, R. G. S. Barsoum, 1998 .

Electronic and photonic packaging, electrical systems design and photonics, and nanotechnology : presented at the 2004 ASME International Mechanical Engineering Congress and Exposition : November 13-19, 2004, Anaheim, California USA

Exposition, Photonic Packaging Division, 2004 .

Dynamic response and behavior of composites : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, C. T. Sun, Bhavani V. Sankar, 1995 .

Rail transportation, 1998 : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California

Exposition, Eric J. Wolf, 1998 .

Rail transportation 2001 : presented at the 2001 ASME International Mechanical Engineering Congress and Exposition, November 11-16, 2001, New York, New York

Exposition, S. K. Punwani, 2001 .

Fluid power systems and technology 2001 : presented at the 2001 ASME International Mechanical Engineering Congress and Exposition, November 11-16, 2001, New York, New York

Exposition, Dean Kim, Noa Manring, 2001 .

Thermo-mechanical characterization of evolving packaging materials and structures : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition : November 15-20, 1998, Anaheim, California

Exposition, Zhengfang Qian, Chao-pin Yeh, 1998 .

Innovations in vehicle design and development : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee

Exposition, I. Haque, 1999 .

Proceedings of the ASME Noise Control and Acoustics Division : presented at the 1996 ASME International Mechanical Engineering Congress and Exposition : November 17-22, 1996, Atlanta, Georgia

Exposition, Acoustics Division, P. R. Mantena, 1996 .

Electronic and photonic packaging, electrical systems and photonic design, and nanotechnology : presented at the 2003 ASME International Mechanical Engineering Congress : November 15-21, 2003, Washington, D.C.

Exposition, S. W. Ricky Lee, Photonic Packaging Division, 2003 .

Energy conversion 2002 : fuels and combustion technologies nuclear engineering : presented at the 2002 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 2002, New Orleans, Louisiana

Exposition, Combustion Technologies Division, 2002 .

On the recent advances of the ultrasonic nondestructive evaluation and composite material characterization : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19,1999, Nashville, Tennessee

Tribikram Kundu, Exposition, Vikram K. Kinra, 1999 .

Micro-electro-mechanical systems (MEMS) 2002 : presented at the 2002 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 2002, New Orleans, Louisiana

Exposition, 2002 .

Finite thermoelasticity : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee

Exposition, James Casey, Rohan Abeyaratne, 1999 .

Advances in heat and mass transfer in biotechnology 2001 : presented at the 2001 ASME International Mechanical Engineering Congress and Exposition, November 11-16, 2001, New York, New York

Exposition, John C. Bischof, Elaine P. Scott, 2001 .

Reliability, stress analysis, and failure prevention aspects of adhesive and bolted joints, rubber components, composite springs : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California

Exposition, Erol Sancaktar, Erol Sancaktar, 1998 .

Adaptive structures and material systems, 1998 : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition : November 15-20, 1998, Anaheim, California

Exposition, James S. Sirkis, Greg Washington, 1998 .

Engineering data management and emerging technologies : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, K. H. Law, 1995 .

Crashworthiness, occupant protection and biomechanics in transportation systems 2001 : presented at the 2001 ASME International Mechanical Engineering Congress and Exposition, November 11-16, 2001, New York, New York

Exposition, Saeed David Barbat, Hikmat F. Mahmood, 2000 .

Advanced materials : development, characterization, processing, and mechanical behavior : book of abstracts : presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia

Exposition, Ted Nicholas, T. Nicholas, 1996 .

APEC 2005 : twentieth annual IEEE Applied Power Electronics Conference and Exposition, 6-10 March 2005, Hilton Austin, Austin, Texas

Exposition, 2005 .

Advanced vehicle technologies 2001 : presented at the 2001 ASME International Mechanical Engineering Congress and Exposition, November 11-16, 2001, New York, New York

Exposition, Brian Gilmore, 2001 .

Exposition, L. S. Turng, 2000 .

Bearing design for off-highway equipment

Exposition, 1982 .

Vibration and control of mechanical systems : presented at the 2001 ASME International Mechanical Engineering Congress and Exposition, November 11-16, 2001, New York, New York

Exposition, Albert C. J. Luo, H. Rahnejat, 2001 .

Computers in engineering 1991 : proceedings of the 1991 ASME International Computers in Engineering Conference and Exposition, August 18-22 1991, Santa Clara, California

Exposition, Terry E. Shoup, Gopal Guputa, 1991 .

Rail transportation, 1997 : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas

Exposition, Daniel H. Stone, 1997 .

Engines : my life and my work

Exposition, Hans List, Lubricants Meeting, 1990 .

Nonlinear dynamics of shells and plates : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition : November 5-10, 2000, Orlando, Florida

Piping Division, Exposition, M. P. Paidoussis, 2000 .

Recent advances in heat transfer and micro-structure modelling for metal processing : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, Remn-Min Guo, James J. M. Too, 1995 .

Applications of design for manufacturing : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California

Exposition, Samir B. Billatos, Byoung Sung Kim, 1998 .

Proceedings of the ASME Aerospace Division 2000 : design, analysis, and processing of textile composite damage initiation and prediction in composite emerging issues in multidisciplinary structural design : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, Nove

Exposition, J. D. Whitcomb, 2000 .

Ergonomics, work station, and driver issues

Exposition, Bus Meeting, 2000 .

Proceedings of the ASME Fluids Engineering Division

Exposition, 1995 .

Sensors and Actuators 1985

Exposition, 1985 .

2014 IEEE Energy Conversion Congress and Exposition (ECCE 2014), Pittsburgh, Pennsylvania, USA, 14-18 September 2014

Exposition, 2014 .

Accident reconstruction : human, vehicle and environmental factors

Exposition, 1990 .

Engineering data management : key to integrated product development : proceedings of the 1992 ASME International Computers in Engineering Conference and Exposition, August 2-6, San Francisco, California

Exposition, Asme, Exposition, 1992 .

Heavy duty engine cooling systems

Exposition, 1982 .

Liquid metals and solidification : a seminar on Liquid Metals and Solidification held during the thirty-ninth National Metal Congress and Exposition, Chicago, November 2 to 8, 1957

Exposition, R. Maddin, Solidification, 1958 .

Transactions : SDCE 14th International die casting congress and exposition, May 11-14, 1987, Toronto, Ontario, Canada : ... World calss technology

Exposition, 1987 .

Harnessing biotechnology for the 21st century : proceedings of the Ninth International Biotechnology Symposium and Exposition, Crystal City, Virginia, August 16-21, 1992

Exposition, Michael R. Ladisch, Exposition, 1992 .

High strain rate effects on polymer, metal and ceramic matrix composites and other advanced materials : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

Exposition, J. Vinson, Y. Rajapakse, 1995 .