Yasutoshi Senoo

发表

Viscous Effects on Slip Factor of Centrifugal Blowers

Yasutoshi Senoo, S. Maruyama, T. Koizumi, 1974 .

On the Stall and Choke Limits of Supersonic Centrifugal Impellers : Series B : Fluid Engineering Heat Transfer Combustion, Power Thermophysical Properties

Yasutoshi Senoo, Hiroshi Hayami, Kohji Nakashima, 1987 .

Effect of Blade Tip Configuration on Tip Clearance Loss of a Centrifugal Impeller

Yasutoshi Senoo, Masahiro Ishida, Hironobu Ueki, 1990 .

Closure to “Discussions of ‘The Influence of Tip Clearance on Stall Limits of a Rectilinear Cascade of Compressor Blades’” (1961, ASME J. Basic Eng., 83, pp. 377–378)

Yasutoshi Senoo, Ghassan Khabbaz, 1961 .

Closure to “Discussion of ‘Viscous Effects on Slip Factor of Centrifugal Blowers’” (1975, ASME J. Eng. Power, 97, p. 460)

Yasutoshi Senoo, S. Maruyama, T. Koizumi, 1976 .

Experimental Study on Flow in a Supersonic Centrifugal Impeller

Yasutoshi Senoo, H. Yamasaki, H. Hayami, 1979 .

Design and Test of a Fan Diffuser Bend System Suitable for a Ground Effect Machine

Yasutoshi Senoo, George L. Perrone, Jules Dussourd, 1962 .

Discussion: “Experimental Investigation of Unsteady Phenomena in Vaneless Radial Diffusers” (Abdelhamid, A. N., Colwill, W. H., and Barrows, J. F., 1979, ASME J. Eng. Power, 101, pp. 52–59)

Yasutoshi Senoo, 1979 .

Equations of the Blade Loading and the Slip Factor of a Centrifugal Impeller : Series B : Fluid Engineering, Heat Transfer, Combustion, Power, Thermophysical Properties

Yasutoshi Senoo, Hideomi Harada, 1986 .

The influence of tip clearance on stall limits of a rectilinear cascade of compressor blades

Yasutoshi Senoo, Ghassan Khabbaz, 1961 .

Publication Policies of Technical Papers in ASME and JSME( Special Issue on the Mechanical Engineering and Industries"Japan in the World")

Yasutoshi Senoo, 1981 .

Closure to “Discussion of ‘A Blade Theory of an Impeller With an Arbitrary Surface of Revolution’” (1972, ASME J. Eng. Power, 94, p. 71)

Yasutoshi Senoo, Yoshiyuki Nakase, 1972 .

Discussion: “Steady Fluid Flow in a Radial Vaneless Diffuser” (Jansen, W., 1964, ASME J. Basic Eng., 86, pp. 607–617)

Yasutoshi Senoo, 1964 .

Correction of Lift Coefficient for Tandem-Circular-Cascade Diffusers

Yasutoshi Senoo, Hiroshi Hayami, Fumiyuki Kitayama, 1985 .

Low-Solidity Tandem-Cascade Diffusers for Wide-Flow-Range Centrifugal Blowers

Hiroshi Hayami, Yasutoshi Senoo, Hironobu Ueki, 1983 .

Compressor Performance Influenced by Distribution of Tip Clearance of Centrifugal Impeller : Series B : Fluid Engineering Heat Transfer Combustion, Power Thermophysical Properties

Yasutoshi Senoo, Hiroshi Hayami, Kohji Nakashima, 1987 .

Research and Design of Turbomachinery(Minor Special Issue on Hydraulic Machinery)

Yasutoshi Senoo, 1972 .

Pressure Recovery of Collectors With Annular Curved Diffusers

Yasutoshi Senoo, Nobumasa Kawaguchi, 1983 .

A Study on Unstable S-Shape Characteristic Curves of Pump Turbines at No-Flow

Yasutoshi Senoo, Y. Senoo, M. Yamaguchi, 1987 .

Deterioration of compressor performance due to tip clearance of centrifugal impellers.

Yasutoshi Senoo, Masahiro Ishida, Y. Senoo, 1986 .

Improvement of the Performance of Conical Diffusers by Vortex Generators

Yasutoshi Senoo, Michihiro Nishi, M. Nishi, 1974 .

Analysis of Noise Generated by Low Solidity Cascade Diffuser in a Centrifugal Blower

Yasutoshi Senoo, Masahiro Ishida, Hironobu Ueki, 2008 .

Secondary Flow Due to the Tip Clearance at the Exit of Centrifugal Impellers

Yasutoshi Senoo, Masahiro Ishida, Hironobu Ueki, 1990 .

Noise Generated by Low Pressure Axial Fans

Yasutoshi Senoo, Yoshio Kodama, 1973 .

Influence of Inlet Flow Conditions and Geometries of Centrifugal Vaneless Diffusers on Critical Flow Angle for Reverse Flow

Yasutoshi Senoo, Yoshifumi Kinoshita, Y. Senoo, 1977 .

Closure to “Discussions of ‘Behavior of Severely Asymmetric Flow in a Vaneless Diffuser’” (1975, ASME J. Eng. Power, 97, pp. 383–386)

Yasutoshi Senoo, Masahiro Ishida, 1975 .

The Swirl Flow in Long Pipes with Different Roughnesses

Yasutoshi Senoo, Tetsuzo Nagata, 1972 .

Asymmetric Flow in Vaneless Diffusers of Centrifugal Blowers

Yasutoshi Senoo, Masahiro Ishida, Yoshifumi Kinoshita, 1977 .

Swirl Flow in Conical Diffusers

Yasutoshi Senoo, Nobumasa Kawaguchi, Tetsuzou Nagata, 1977 .

Swirl flow in long pipes with different roughness

Yasutoshi Senoo, Y. Senoo, T. Nagata, 1972 .

Deterioration of Compressor Performance Due to Tip Clearance of Centrifugal Impellers

Yasutoshi Senoo, Masahiro Ishida, Y. Senoo, 1987 .

Pressure losses and flow field distortion induced by tip clearance of centrifugal and axial compressors

Yasutoshi Senoo, Y. Senoo, 1987 .

Optimum Strut-Configuration for Downstream Annular Diffusers With Variable Swirling Inlet Flow

Yasutoshi Senoo, Michihiro Nishi, T. Kojima, 1981 .

Prediction of Flow Separation in a Diffuser by a Boundary Layer Calculation

Yasutoshi Senoo, Michihiro Nishi, M. Nishi, 1976 .

Effect of blade tip configuration on tip clearance loss of a centrifugal impeller.

Yasutoshi Senoo, Masahiro Ishida, Hironobu Ueki, 1987 .

Flow Regimes and Surge Frequency Observed in an Elbow-Type Draft Tube

Yasutoshi Senoo, Michihiro Nishi, Takashi Kubota, 1983 .

Analysis of secondary flow behavior in low solidity cascade diffuser of a centrifugal blower

Yasutoshi Senoo, Masahiro Ishida, Hironobu Ueki, 2010 .

A Numerical Method of Flow through a Cross-Flow Runner

Yasutoshi Senoo, Yoshiyuki Nakase, Jun-ichirou Fukutomi, 1991 .

Measurement of Two-Dimensional Periodic Flow With a Cobra Probe

Yasutoshi Senoo, Y. Kita, Kusuo Ookuma, 1973 .

Deceleration Rate Parameter and Algebraic Prediction of Turbulent Boundary Layer

Yasutoshi Senoo, Michihiro Nishi, 1976 .

Flow in the Inducer of a Centrifugal Compressor Measured With a Laser Velocimeter

Yasutoshi Senoo, Hironobu Ueki, Hiroshi Hayami, 1985 .

Influence of draft tube shape on the characteristics of pressure surge and flow regime.

Yasutoshi Senoo, Michihiro Nishi, Takashi Kubota, 1986 .