Noriaki Sano

发表

Cutter location generation method for improving feedrate and machining accuracy based on control characteristics of machine tool

Kosuke Saito, Hideki Aoyama, Noriaki Sano, 2012 .

Determination Method of Locations and Postures of Cutting Tool for 5-Axis Machining Based on Intuition and Minimum Cusp Height

Hideki Aoyama, Noriaki Sano, Yumiko Suzuki, 2012 .

Toolpath Generation Method Based on Control Characteristics of Machine Tool for High-Speed and High-Accuracy Machining

Kosuke Saito, Hideki Aoyama, Noriaki Sano, 2012, Int. J. Autom. Technol..

Basic study on automatic determination of injection conditions based on automatic recognition of forming states

Hideki Aoyama, Noriaki Sano, Masaki Ogawa, 2018 .

209 曲面加工における高速送りを実現するNCプログラムの生成法(OS2-2 デジタル設計・評価・製造システムII)

Kosuke Saito, Hideki Aoyama, Noriaki Sano, 2012 .

210105 Basic Study on Development of CAM System for Estimating Burr

Hideki Aoyama, Noriaki Sano, Kentaro Ota, 2011 .

Tool Paths Planning under Window Framing Scheme for Burr Minimization

Hideki Aoyama, Noriaki Sano, Sothea Kruy, 2015 .

Generation of NC Program for Realizing High Speed Feed Rate of Cutting Tool

Hideki Aoyama, Noriaki Sano, Shintaro Sakurai, 2012 .

Accurate Estimation of Cutting Time Based on Control Principle of Machine Tool

Kosuke Saito, Hideki Aoyama, Noriaki Sano, 2016, Int. J. Autom. Technol..

S142012 Efficient and High-Precision Processing Method of Curved Surface for 5-Axis Control Machining using Flat End Mill

Hideki Aoyama, Noriaki Sano, Tatsuya Hokkyo, 2012 .

3297 NC Data Generation Method for High Speed and High Accuracy Machining Taking into Consideration Control Characteristics of Machine Tool

Kosuke Saito, Hideki Aoyama, Noriaki Sano, 2011 .

Optimization of hole making processes considering machining time and machining accuracy

Hideki Aoyama, Noriaki Sano, Eric H. Guiotoko, 2017 .

A method for identification of control parameters of NC machine tool and its utilization for high-speed machining and accurate machining time estimation

Hideki Aoyama, Noriaki Sano, Yuki Yamamoto, 2015 .

0306 High Efficiency Machining of Curved Surfaces Using 5 Axis Machine Tool

Hideki Aoyama, Noriaki Sano, Satoshi Yamagata, 2015 .

3319 Development of System to Predict Burr in Endmilling

Hideki Aoyama, Noriaki Sano, Kentaro Ohta, 2011 .

CAD System for Utilizing Design Information and Know-How Based on Function Features

Hideki Aoyama, Noriaki Sano, Sonken Ando, 2012 .

Estimation System of Accurate Cutting Time Based on Actual Feedrate Identification

Kosuke Saito, Hideki Aoyama, Noriaki Sano, 2012 .

DEVELOPMENT OF VACUUM INJECTION MOLDING SYSTEM WITH PURIFIER FOR ENVIRONMENT PROTECTION

Noriaki Sano, Tsuyoshi Asano, Tatsuo Kanki, 2000 .

Freeze-dried solid foams prepared from carbon nanotube aqueous suspension: Application to gas diffusion layers of a proton exchange membrane fuel cell

Noriaki Sano, N. Sano, Kyuya Nakagawa, 2011 .

Transformation from single-walled carbon nanotubes to nanohorns by simple heating with Pd at 1600 °C

Noriaki Sano, Hajime Tamon, Taiga Ishii, 2011 .

Influence of dissolved inorganic additives on decomposition of phenol and acetic acid in water by direct contact of gas corona discharge

Noriaki Sano, Atsushi Toyoda, Daisuke Yamamoto, 2004 .

Modeling of experimental treatment of acetaldehyde-laden air and phenol-containing water using corona discharge technique.

Noriaki Sano, Tawatchai Charinpanitkul, Wiwut Tanthapanichakoon, 2006, Environmental science & technology.

Development of accurate estimation method of machining time in consideration of characteristics of machine tool

Hideki Aoyama, Noriaki Sano, Yuki Yamamoto, 2017 .

Separated synthesis of iron-included carbon nanocapsules and nanotubes by pyrolysis of ferrocene in pure hydrogen

Noriaki Sano, Tatsuo Kanki, N. Sano, 2003 .

Application of dielectrophoresis to fabrication of carbon nanohorn gas sensor

Noriaki Sano, Junya Suehiro, Kiminobu Imasaka, 2006 .

Decomposition of Phenol in Water by a Cylindrical Wetted-Wall Reactor Using Direct Contact of Gas Corona Discharge

Noriaki Sano, Atsushi Toyoda, Tatsuo Kanki, 2003 .

Removal of acetaldehyde in air using a wetted-wall corona discharge reactor

Noriaki Sano, Daisuke Yamamoto, Tawatchai Charinpanitkul, 2004 .