Michael H. Moys

发表

The effect of grate design on the behaviour of grate-discharge grinding mills

Michael H. Moys, 1986 .

Assessment of discrete element method for one ball bouncing in a grinding mill

Michael H. Moys, H. Dong, 2002 .

A model for pulverised fuel production in an air-swept tube mill

Michael H. Moys, Murray M. Bwalya, 2013 .

Measurement of impact behaviour between balls and walls in grinding mills

Michael H. Moys, H. Dong, 2003 .

Measurement of particle loading on bubbles in the flotation process

Juan Yianatos, Michael H. Moys, J. Larenas, 2010 .

Towards optimising ball-milling capacity: Effect of lifter design

Michael H. Moys, Augustine B. Makokha, 2006 .

Validation of the discrete element method (DEM) by comparing predicted load behaviour of a grinding mill with measured data

Michael H. Moys, M. A. van Nierop, J. C. van Tonder, 2000 .

Effect of cone-lifters on the discharge capacity of the mill product: Case study of a dry laboratory scale air-swept ball mill

Michael H. Moys, Augustine B. Makokha, 2007 .

Load behaviour in the Hicom nutating mill

Michael H. Moys, P. Q. Nesbit, 1998 .

Discrete element method (DEM) modelling of evolving mill liner profiles due to wear. Part II. Industrial case study

Michael H. Moys, Murray M. Bwalya, Johnny T. Kalala, 2005 .

The use of the discrete element method and fracture mechanics to improve grinding rate prediction

Michael H. Moys, A. L. Hinde, Murray M. Bwalya, 2001 .

Further validation of DEM modeling of milling: effects of liner profile and mill speed

Michael H. Moys, O. Hlungwani, J. Rikhotso, 2003 .

Modeling of energy loss to the environment from a grinding mill. Part I: Motivation, literature survey and pilot plant measurements

Michael H. Moys, E. Kapakyulu, M. Moys, 2007 .

Study of the influence of liner wear on the load behaviour of an industrial dry tumbling mill using the Discrete Element Method (DEM)

Michael H. Moys, J. T. Kalala, Johnny T. Kalala, 2008 .

Measurement of a proxy for froth phase bubble sizes as a function of froth depth in flotation machines Part 1. Theoretical development and testing of a new technique

Michael H. Moys, C. Bhondayi, 2014 .

Measurement of the radial and tangential forces exerted by the load on a liner in a ball mill, as a function of load volume and mill speed

Michael H. Moys, J. Skorupa, 1993 .

Load behavior and mill power

Michael H. Moys, H. Dong, 2003 .

A new approach to optimising the life and performance of worn liners in ball mills: Experimental study and DEM simulation

Michael H. Moys, Augustine B. Makokha, Murray M. Bwalya, 2007 .

Exploration of mill power modelled as function of load behaviour

Michael H. Moys, M. A. van Nierop, 2001 .

DEM modelling of the dynamics of mill startup

Michael H. Moys, G. M Monama, 2002 .

Discrete element method (DEM) modelling of evolving mill liner profiles due to wear. Part I: DEM validation

Michael H. Moys, Murray M. Bwalya, Johnny T. Kalala, 2005 .

Premature centrifuging, oscillation and axial mixing of an industrial grinding mill load

Michael H. Moys, M. A. van Nierop, 1998 .

Steady state inferential modeling of temperature and pressure in an air-swept coal pulverizing ball mill

Michael H. Moys, Augustine B. Makokha, Costa Couvas, 2009 .

Measurement of the load behaviour in a dry pilot mill using an inductive proximity probe

Michael H. Moys, Kiangi K. Kiangi, 2006 .

A technique to measure velocities of a ball moving in a tumbling mill and its applications

Michael H. Moys, H. Dong, 2001 .

Measurement of load behaviour in an industrial grinding mill

Michael H. Moys, M. A. van Nierop, 1995 .

Measurement of load behaviour in an industrial grinding mill

Michael H. Moys, M. A. van Nierop, 1997 .

Effects of slurry filling and mill speed on the net power draw of a tumbling ball mill

Michael H. Moys, François K. Mulenga, 2014 .

DEM validation of media shape effects on the load behaviour and power in a dry pilot mill

Michael H. Moys, Alex Potapov, Kiangi K. Kiangi, 2013 .

Progress in measuring and modelling load behaviour in pilot and industrial mills

Michael H. Moys, M. A. van Nierop, I. Smit, 1996 .

A discrete element method investigation of the charge motion and power draw of an experimental two-dimensional mill

Michael H. Moys, A. L. Hinde, M. A. van Nierop, 2001 .

Short time mixing response in a big flotation cell

Juan Yianatos, F. Díaz, Michael H. Moys, 2008 .

Particle filling and size effects on the ball load behaviour and power in a dry pilot mill: Experimental study

Michael H. Moys, Kiangi K. Kiangi, 2008 .

Multivariate approach to on-line prediction of in-mill slurry density and ball load volume based on direct ball and slurry sensor data

Michael H. Moys, Augustine B. Makokha, 2012 .

Axial mixing of slurry in an autogenous grinding mill

Michael H. Moys, M. A. van Nierop, M. Moys, 2002 .

The measurement of forces exerted by the load on liners in rotary mills (wet and dry)

Michael H. Moys, W. W. Stange, I. Smit, 1996 .

Residence time distributions and mass transport in the froth phase of the flotation process

Michael H. Moys, 1984 .

Numerical and experimental study of the effect of a froth baffle on flotation cell performance

Michael H. Moys, Gwiranai Danha, C. Bhondayi, 2015 .

Optimisation of the secondary ball mill using an on-line ball and pulp load sensor – The Sensomag

Michael H. Moys, Aubrey Mainza, Pratish Keshav, 2011 .

Froth recovery of industrial flotation cells

Juan Yianatos, Michael H. Moys, F. Contreras, 2008 .

Effects of grinding media shapes on load behaviour and mill power in a dry ball mill

Michael H. Moys, Kiangi K. Kiangi, N. S. Lameck, 2006 .

THE EFFECT OF OVERLOADING AND PREMATURE CENTRIFUGING ON THE POWER OF AN AUTOGENOUS MILL

Michael H. Moys, M. A. van Nierop, 1997 .

Mass Transport in Flotation Froths

Michael H. Moys, 1989 .

Optimization of in-mill ball loading and slurry solids concentration in grinding of UG-2 ores: A statistical experimental design approach

Michael H. Moys, Augustine B. Makokha, Alex M. Muumbo, 2012 .

Effects of filling degree and viscosity of slurry on mill load orientation

Michael H. Moys, François M. Katubilwa, 2011 .

Experimental study of oblique impacts with initial spin

Michael H. Moys, M. Moys, H. Dong, 2006 .

Modeling of energy loss to the environment from a grinding mill. Part II: Modeling the overall heat transfer coefficient

Michael H. Moys, E. Kapakyulu, 2007 .

Use of temperature for diagnosing mixing in the IsaMill

Michael H. Moys, R. Gunda, 2015 .

Effect of ball size distribution on milling rate

Michael H. Moys, François M. Katubilwa, M. Moys, 2009 .