Hu Li

发表

Analysis of Driving Parameters and Emissions for Real World Urban Driving Cycles using an on-board Measurement Method for a EURO 2 SI car

Gordon E. Andrews, Margaret Bell, Hu Li, 2007 .

30kW PEM Fuel Cell Power System Development

Hu Li, 2001 .

Coupled Thermal-mechanical FEM Analysis of Power Spinning of Titanium Alloy Thin-walled Shell

Hu Li, Hu Li, 2008 .

Study of Thermal Characteristics and Emissions during Cold Start using an on-board Measuring Method for Modern SI Car Real World Urban Driving

Gordon E. Andrews, Margaret Bell, Hu Li, 2008 .

Excitation pattern based on Walsh function for electrical impedance tomography

Hu Li, 2007 .

The Development Tredn of Precision Strike Weapon of Air Force of USA

Hu Li, 2004 .

Application of damage interface model for 3-D FEM analysis

Hu Li, 2002 .

Modeling and Simulation of Cantilever Piezoelectric Vibration Generator

Hu Li, 2008 .

Research of Ultrahigh Speed Grinding Spindle System Based on Squeeze Film Damping Technology

Tian Biao Yu, Wan Shan Wang, Hu Li, 2008 .

How Car Professional Instructors Train Students' Innovative Ability

Hu Li, 2014 .

Determination of Particle Penetration Factors in a Particle Transfer Line for Aero Gas Turbine Engine Exhaust Particle Measurement

Hu Li, Simon Blakey, Mark P. Johnson, 2014 .

Study on Test-launch Equipment Training System in Test Base

Hu Li, 2002 .

Experimental study on filter geotextiles applied in Shenzhen River project

Hu Li, 2002 .

A Multilevel Study on the Asymmetric Impacts of RLMX in Blended Workforce Context

Jing Wu, Chunlin Liu, Hu Li, 2014 .

Reduction of Exhaust Emissions by a Synthetic Lubricating Oil with Higher Viscosity Grade and Optimized Additive Package for a Heavy Duty DI Diesel Engine Test

Gordon E. Andrews, Hu Li, Amanda Lea-Langton, 2008 .

Three-dimensional ghost imaging with a signal-pixel detector

Guihua Zeng, Hu Li, Jianhong Shi, 2013, Defense, Security, and Sensing.

A Study on Airflow Field of Super-High Speed Pectination Grinding Wheel Based on PIV

Yancheng Zhang, Wan Shan Wang, Ya Dong Gong, 2008 .

Determination of Carbon Footprint using LCA Method for Straight Used Cooking Oil as a Fuel in HGVs

Hu Li, Jim Ebner, Peipei Ren, 2014 .

Dynamics Modeling and Optimization of Beam in Flip Chip of LED Based on Rayleigh Method

Hu Li, Xue-li Li, Lu-fan Zhang, 2018 .

Design and Implementation of an Embedded Intelligent Instrument for Pure Electric Vehicles

Deng Feng Li, Hu Li, Yun Ting Bai, 2012 .

Unbalanced Current Analysis of 220 kV Short Line Loop Network

Hu Li, Chen Wen-tao, 2013 .

Implementation of a High-Efficiency and Low-Power Switching Regulator IC

Hu Li, 2003 .

Temporal ghost imaging with a chaotic laser

Guihua Zeng, Hu Li, Yuan Li, 2013 .

Investigation of surfacing technique for valve stem of spe cial valves in catalytic cracking devices

Hu Li, 2002 .

Real-World Vehicle Exhaust Emissions Monitoring: Review and Critical Discussion

Gordon E. Andrews, Margaret Bell, Hu Li, 2009 .

Research on Rotary and Tilting Table Five-Axis Milling Post-Processing Software Star-Fpost

Lian Xia, Jiang Han, Hu Li, 2011 .

The Experiment Method of the Study on the Airflow Field around the Grinding Wheel in Super-High Speed Based on PIV

Zhao Hui Deng, Yancheng Zhang, Hu Li, 2007 .

Research on Optimization Design of Low-Voltage Circuit Breaker Power System

Hu Li, Jiang Dong Cao, Jian Bo Ding, 2014 .

Optical wavelet de-noising applied in multi-span nonlinear fiber links

Xiaoping Zhang, Xiaoqiong Qi, Hu Li, 2010 .

Fuel Consumption and GHG Reductions by using Used Cooking Oil as a Fuel in a HGV under Real World Driving Conditions

Hu Li, Laura Campbell, Seyed Hadavi, 2014 .

Applicable Strategy on Energy Saving Optimization in External Wall of Rural Residence Based on Low Cost and Low Technology

Hu Li, Mei Jun Lu, 2013 .

Cause & Protective Measure of Broken Plate of Cement Concrete Pavement

Hu Li, 2000 .

Study on the Dynamic Characteristics of Ultrahigh Speed Grinding Spindle Based on Squeeze Film Damping Technology

Tian Biao Yu, Wan Shan Wang, Hu Li, 2009 .

Survey on research of miniature vibration generation technology based on piezoelectric ceramics

Hu Li, 2007 .

Design of a Band-gap Voltage Reference Source Based on CMOS Process

Hu Li, 2007 .

Examining the Influence of Road Grade on Vehicle Specific Power (VSP) and Carbon Dioxide (CO 2 ) Emission over a Real-World Driving Cycle

James Tate, Hu Li, David W. Wyatt, 2013 .

Investigation of Aldehyde and VOC Emissions during Cold Start and Hot Engine Operations using 100% Biofuels for a DI Engine

Gordon E. Andrews, Hu Li, Amanda Lea-Langton, 2009 .

Emissions from a HGV Using Used Cooking Oil as a Fuel under Real World Driving Conditions

Alison S. Tomlin, Hu Li, Buland Dizayi, 2015 .

Speciation of Nitrogen Compounds in the Tailpipe Emissions from a SI Car under Real World Driving Conditions

Gordon E. Andrews, Hu Li, Ahmad Khalfan, 2014 .

Improving urban bus emission and fuel consumption modeling by incorporating passenger load factor for real world driving

Qian Yu, Hu Li, Tiezhu Li, 2016 .

Application of Close-Range Photogrammetric Technology to Monitor Slope Deformation

Ye Tian, Yuan Zhang, Hu Li, 2015 .

The Binding Face Mechanics Analysis of Multi-Scale Modeling for Artificial Bone Implants

Wan Shan Wang, Hu Li, Jian Yu Yang, 2012 .

Study of the Emissions Generated at Intersections for a SI Car under Real World Urban Driving Conditions

Gordon E. Andrews, Margaret Bell, Hu Li, 2006 .

Temperature Field Analysis and Thermal Error Testing for CNC Machine Tool's Headstock

Yong Chen, Hu Li, Yao Man Zhang, 2014 .

Cold Start SI Passenger Car Emissions from Real World Urban Congested Traffic

Gordon E. Andrews, Hu Li, Ahmad Khalfan, 2015 .

Design of Drill Bits with Diamond Positioning Arrangement

Hu Li, 2011 .

Determination of GHG Emissions, Fuel Consumption and Thermal Efficiency for Real World Urban Driving using a SI Probe Car

Gordon E. Andrews, Hu Li, Ahmad Khalfan, 2014 .