Guoqun Zhao

发表

Fuzzy Synthetic Evaluation on Forming Performance of Stamped Parts

Jun Gao, Tingwei Ji, Guoqun Zhao, 2009, 2009 International Conference on Artificial Intelligence and Computational Intelligence.

Development and Experimental Study of a New Electric-Heating Rapid Thermal Response Mold for RHCM Process

Guoqun Zhao, Yanjin Guan, Guilong Wang, 2011 .

Speed analysis of the radial tire on hydroplaning pavement

Zhonglei Wang, Guoqun Zhao, Qiang Cheng, 2015, ICME 2015.

STUDY OF MATERIAL ACCUMULATED DEFORMATION UNIFORMITY OF EQUAL CHANNEL ANGULAR MULTI-PASS PRESSING PROCESS

Guoqun Zhao, 2005 .

PREFORM DIE SHAPE DESIGN IN METAL FORMING USING AN OPTIMIZATION METHOD

Ramana V. Grandhi, Guoqun Zhao, Ed Wright, 1997 .

Drawing Process Design Based on Fuzzy Knowledge Reasoning

Jun Gao, Tingwei Ji, Guoqun Zhao, 2009, 2009 International Conference on Artificial Intelligence and Computational Intelligence.

A combined algorithm for characteristic edge match of hexahedral meshes based on priority nodes and relative position relationships

Guoqun Zhao, Lu Sun, Yue Mu, 2012 .

An Automatic Delaunay Triangular Mesh Generation Method based On Point Spacing

Guoqun Zhao, Lu Sun, Fang-Pang Lin, 2013 .

RELEASING ALGORITHM FOR VOLUME LOCKING IN RIGID-PLASTIC MESHLESS METHOD

Guoqun Zhao, 2006 .

Engineering applications of 2D and 3D finite element mesh generation in hydrogeology and water resources

Guoqun Zhao, Lu Sun, Fang-Pang Lin, 2017, Computational Geosciences.

Adaptive hexahedral mesh generation and quality optimization for solid models with thin features using a grid-based method

Guoqun Zhao, Lu Sun, 2015, Engineering with Computers.

Grid-based hexahedral element meshing algorithms for solid models with concave curved boundary lines

Guoqun Zhao, Lu Sun, Xinwu Ma, 2012, Engineering with Computers.

Preform design of a generic turbine disk forging process

Ramana V. Grandhi, Guoqun Zhao, Zhenduo Zhao, 1998 .

3D Preform Design in Forging Process based on Quasi-quipotential Field and Response Surface Methods

Guoqun Zhao, Libin Song, Yanjin Guan, 2014 .

AUTOMATIC GENERATION AND REGENERATION ALGORITHM OF HEXAHEDRAL MESH

Guoqun Zhao, 2006 .

Analysis and design of a new manufacturing process for a support shaft using the finite element method

Guoqun Zhao, G.-C Wang, X.-H Huang, 2002 .

Numerical investigation of the thermally and flow induced crystallization behavior of semi-crystalline polymers by using finite element-finite difference method

Guoqun Zhao, Yue Mu, Xianghong Wu, 2012, Comput. Chem. Eng..

A Mandrel Feeding Strategy in Conical Ring Rolling Process

Guoqun Zhao, Wen Meng, Yanjin Guan, 2014 .

Forging preform design with shape complexity control in simulating backward deformation

Ramana V. Grandhi, Guoqun Zhao, Ed Wright, 1995 .

Climbing Performance Analysis of Radial Tire on Wet Pavement

Zhonglei Wang, Guoqun Zhao, Qiang Cheng, 2015 .

Application of neural networks in complex forging die design

Guoqun Zhao, Junna Cheng, Xinhai Zhao, 2010 .

A NN-based expert system for the forging design of steering knuckles

Guoqun Zhao, Tiezhu Zhang, Lianjun Cheng, 2011, 2011 IEEE 5th International Conference on Cybernetics and Intelligent Systems (CIS).

Influence of Mold Temperature on Melt Filling Process of a Thin Plate Part with Microstructures in Injection Molding

Guoqun Zhao, Yanjin Guan, Jitao Liu, 2011 .

Grid-Based Local Refinement Algorithm of Three-Dimensional Hexahedral Meshes: Grid-Based Local Refinement Algorithm of Three-Dimensional Hexahedral Meshes

Zhonglei Wang, Guoqun Zhao, Lili Huang, 2010 .

Multi-Objective Optimization of the Heating Rods Layout for Rapid Electrical Heating Cycle Injection Mold

Guoqun Zhao, Yanjin Guan, Xiping Li, 2010 .

Adaptive hexahedral mesh generation and regeneration using an improved grid-based method

Zhonglei Wang, Guoqun Zhao, Lili Huang, 2016, Adv. Eng. Softw..

Geometry-adaptive generation algorithm and boundary match method for initial hexahedral element mesh

Guoqun Zhao, Hongmei Zhang, Lianjun Cheng, 2008, Engineering with Computers.

Application of the finite-element method in the reform of light-weight vehicle construction

Guoqun Zhao, Peiwu Li, Yoshiro Osawa, 1996 .

Numerical Simulation and Experimental Study on Parameter Optimization of Cold Flanging Process of Pipe Tee

Qiang Cheng, Zhonglei Wang, Guoqun Zhao, 2015 .

Optimization of porthole extrusion dies with the developed algorithm based on finite volume method

Hao Chen, Guoqun Zhao, Limin Zhang, 2016 .

Research on optimization design of the heating/cooling channels for rapid heat cycle molding based on response surface methodology and constrained particle swarm optimization

Guoqun Zhao, Huiping Li, Yanjin Guan, 2011, Expert Syst. Appl..

Adaptive generation of hexahedral element mesh using an improved grid-based method

Guoqun Zhao, Hongmei Zhang, Xinwu Ma, 2007, Comput. Aided Des..

Computer aided preform design in forging using the inverse die contact tracking method

Ramana V. Grandhi, Guoqun Zhao, Ed Wright, 1996 .

An algorithm for decomposition of sub-domains and quadrilateral mesh generation with line constraints

Guoqun Zhao, D. Zhang, Xinwu Ma, 2017, Adv. Eng. Softw..

PREFORM DIE DESIGN USING FINITE ELEMENT BASED INVERSE SIMULATION TECHNIQUE

Guoqun Zhao, 2000 .

Evaluation of a pyramid die extrusion for a hollow aluminum profile using FE simulation

Guoqun Zhao, Liang Chen, Wendong Zhang, 2015 .

Modeling and simulation of three-dimensional planar contraction flow of viscoelastic fluids with PTT, Giesekus and FENE-P constitutive models

Guoqun Zhao, Yue Mu, Jiqiang Zhai, 2012, Appl. Math. Comput..

An automated approach to quadrilateral mesh generation with complex geometric feature constraints

Guoqun Zhao, Xinwu Ma, 2014, Engineering with Computers.

An automatic quadrilateral mesh generation algorithm applied to 2-D overland flow simulations

Guoqun Zhao, Lu Sun, Gour-Tsyh Yeh, 2018, Computational Geosciences.

Incorporating improved refinement techniques for a grid-based geometrically-adaptive hexahedral mesh generation algorithm

Zhonglei Wang, Guoqun Zhao, Lili Huang, 2013, Adv. Eng. Softw..

Quality improvement method for graded hexahedral element meshes

Guoqun Zhao, Hongmei Zhang, 2010, Comput. Aided Geom. Des..

Sensitivity analysis based preform die shape design for net-shape forging

Ramana V. Grandhi, Guoqun Zhao, Ed Wright, 1997 .

Studies on optimization of metal forming processes using sensitivity analysis methods

Ramana V. Grandhi, Guoqun Zhao, Xinwu Ma, 2004 .

Weak Galerkin finite element methods for Sobolev equation

Guoqun Zhao, Jintao Cui, Fuzheng Gao, 2017, J. Comput. Appl. Math..

Preform design in forging process of complex parts by using quasi-equipotential field and response surface methods

Guoqun Zhao, Libin Song, Yanjin Guan, 2015 .

Efficient thermomechanical analysis of functionally graded structures using the symmetric SPH method

Guoqun Zhao, Hakim Naceur, Daniel Coutellier, 2021 .

Automatic quadrilateral mesh generation and quality improvement techniques for an improved combination method

Guoqun Zhao, Gour-Tsyh Yeh, Lu Sun, 2015, Computational Geosciences.

Process simulation and optimization of laser tube bending

Guoqun Zhao, Yanjin Guan, Sheng Sun, 2013 .

Effect of Process Parameters on Die Wear Behavior of Aluminum Alloy Rod Extrusion

Guoqun Zhao, Cunsheng Zhang, Yanjin Guan, 2013 .

Modeling of aluminum alloy profile extrusion process using finite volume method

Guoqun Zhao, Shumei Lou, Guoqun Zhao, 2008 .

The microstructure optimization of H-shape forgings based on preforming die design

Guoqun Zhao, Guilong Wang, J. Guan, 2009 .

Continuous modeling and simulation of flow-swell-crystallization behaviors of viscoelastic polymer melts in the hollow profile extrusion process

Guoqun Zhao, Yue Mu, Lianqiang Hang, 2015 .

Preform die shape design for uniformity of deformation in forging based on preform sensitivity analysis

Guoqun Zhao, Xinhai Zhao, Guangchun Wang, 2002 .

AUTOMESH‐2D/3D: robust automatic mesh generator for metal forming simulation

Guoqun Zhao, Xinwu Ma, Lu Sun, 2011 .

Fabrication of Al/Mg/Al laminate by a porthole die co-extrusion process

Guoqun Zhao, Cunsheng Zhang, Xingrong Chu, 2018, Journal of Materials Processing Technology.

Microstructural evolution and mechanical properties of welding seams in aluminum alloy profiles extruded by a porthole die under different billet heating temperatures and extrusion speeds

Guoqun Zhao, Cunsheng Zhang, Junquan Yu, 2017 .

Adaptive hexahedral mesh generation based on local domain curvature and thickness using a modified grid-based method

Guoqun Zhao, Guoqun Zhao, Hongmei Zhang, 2007 .

Dedicated linear – Voce model and its application in investigating temperature and strain rate effects on sheet formability of aluminum alloys

Guoqun Zhao, Cunsheng Zhang, Dominique Guines, 2015 .

Optimal design of heating channels for rapid heating cycle injection mold based on response surface and genetic algorithm

Guoqun Zhao, Yanjin Guan, Xiping Li, 2009 .

Research on a New Variotherm Injection Molding Technology and its Application on the Molding of a Large LCD Panel

Guoqun Zhao, Yanjin Guan, Guilong Wang, 2009 .

Research of thermal response simulation and mold structure optimization for rapid heat cycle molding processes, respectively, with steam heating and electric heating

Guoqun Zhao, Yanjin Guan, Guilong Wang, 2010 .

Investigation of computer-aided engineering of silicone rubber vulcanizing (I)—vulcanization degree calculation based on temperature field analysis

Guoqun Zhao, Sheng Sun, Yuxi Jia, 2003 .

Optimal Design of Second-Step Welding Chamber for a Condenser Tube Extrusion Die Based on the Response Surface Method and the Genetic Algorithm

Guoqun Zhao, Cunsheng Zhang, Yanjin Guan, 2013 .

Adaptive generation and local refinement methods of three-dimensional hexahedral element mesh

Guoqun Zhao, Xinwu Ma, Lu Sun, 2012 .

Optimization of an aluminum profile extrusion process based on Taguchi’s method with S/N analysis

Guoqun Zhao, Cunsheng Zhang, Yanjin Guan, 2012 .

Multi‐objective optimization of heating channels for rapid heating cycle injection mold using Pareto‐based genetic algorithm

Guoqun Zhao, Yanjin Guan, Xiping Li, 2010 .

Research on mechanical properties of 22MnB5 steel quenched in a steel die

Guoqun Zhao, Lianfang He, Guoqun Zhao, 2011 .

Constitutive equation and processing maps of an Al–Mg–Si aluminum alloy: Determination and application in simulating extrusion process of complex profiles

Guoqun Zhao, Cunsheng Zhang, Yanjin Guan, 2016 .

Effect of mold temperature on motion behavior of short glass fibers in injection molding process

Guoqun Zhao, Can Yang, Xiping Li, 2014 .

Effect of extrusion stem speed on extrusion process for a hollow aluminum profile

Guoqun Zhao, Cunsheng Zhang, Fujun Kou, 2012 .

Constitutive relationships of hot stamping boron steel B1500HS based on the modified Arrhenius and Johnson–Cook model

Guoqun Zhao, Lei Zhang, Lianfang He, 2013 .

Research on optimum heating system design for rapid thermal response mold with electric heating based on response surface methodology and particle swarm optimization

Guoqun Zhao, Yanjin Guan, Guilong Wang, 2011 .

A nonlinear numerical analysis for metal-forming process using the rigid-(visco)plastic element-free Galerkin method

Guoqun Zhao, Lu Ping, Guan Yanjin, 2009 .

Effect of rapid heating cycle injection mold temperature on crystal structures, morphology of polypropylene and surface quality of plastic parts

Guoqun Zhao, Yanjin Guan, Guoqun Zhao, 2015, Journal of Polymer Research.

Microstructure analysis of an Al-Zn-Mg alloy during porthole die extrusion based on modeling of constitutive equation and dynamic recrystallization

Guoqun Zhao, Cunsheng Zhang, Liang Chen, 2017 .

Material flow analysis and extrusion die modifications for an irregular and multitooth aluminum alloy radiator

Guoqun Zhao, Cunsheng Zhang, Yuanyuan Dong, 2016 .

Hot deformation behavior and constitutive modeling of homogenized 6026 aluminum alloy

Guoqun Zhao, Junquan Yu, Liang Chen, 2015 .

An Investigation of Die Wear Behavior During Aluminum Alloy 7075 Tube Extrusion

Guoqun Zhao, Peng Li, Cunsheng Zhang, 2013 .

Constitutive analysis of homogenized 7005 aluminum alloy at evaluated temperature for extrusion process

Guoqun Zhao, Junquan Yu, Liang Chen, 2015 .

Topology optimization of plane structures using smoothed particle hydrodynamics method

Guoqun Zhao, Ping Lu, Hakim Naceur, 2017 .

Research and application of a new rapid heat cycle molding with electric heating and coolant cooling to improve the surface quality of large LCD TV panels

Guoqun Zhao, Yanjin Guan, Guilong Wang, 2011 .

Analysis of longitudinal weld seam defects and investigation of solid-state bonding criteria in porthole die extrusion process of aluminum alloy profiles

Guoqun Zhao, Junquan Yu, Liang Chen, 2016 .

Quality improvement methods for hexahedral element meshes adaptively generated using grid‐based algorithm

Guoqun Zhao, Xinwu Ma, Lu Sun, 2012 .

Investigation of computer-aided engineering of silicone rubber vulcanizing (II)—finite element simulation of unsteady vulcanization field

Guoqun Zhao, Sheng Sun, Yuxi Jia, 2002 .

Multi-objective optimization design of the heating/cooling channels of the steam-heating rapid thermal response mold using particle swarm optimization

Guoqun Zhao, Yanjin Guan, Guilong Wang, 2011 .