S. E. Bolt

发表

Pressure vessel fracture studies pertaining to a PWR LOCA-ECC thermal shock: experiments TSE-3 and TSE-4 and update of TSE-1 and TSE-2 analysis

R. D. Cheverton, S. E. Bolt, 1977 .

Behavior of short flaws during thermal shock: thermal-shock experiment TSE-7

R. D. Cheverton, S. E. Bolt, D. G. Ball, 1983 .

Experimental Stress Analysis of Cylinder-to-Cylinder Shell Models and Comparisons With Theoretical Predictions

R. C. Gwaltney, S. E. Bolt, J. W. Bryson, 1976 .

Pressure vessel fracture studies pertaining to the PWR thermal-shock issue: experiments TSE-5, TSE-5A, and TSE-6

R. D. Cheverton, S. E. Bolt, D. G. Ball, 1985 .

Pressure vessel fracture studies pertaining to the PWR thermal-shock issue: experiment TSE-7

R. D. Cheverton, S. E. Bolt, D. G. Ball, 1985 .

Fracture mechanics data deduced from thermal-shock and related experiments with LWR pressure vessel material

R. D. Cheverton, S. E. Bolt, S. K. Iskander, 1983 .

High-temperature crack-arrest behavior in 152-mm-thick SEN wide plates of quenched and tempered A 533 grade B class 1 steel

S. E. Bolt, B. R. Bass, J. Keeney-Walker, 1989 .

Theoretical and experimental stress analyses of ORNL thin-shell cylinder-to- cylinder model 2

R. C. Gwaltney, S. E. Bolt, J. W. Bryson, 1975 .

Performance of low-upper-shelf material under pressurized-thermal-shock loading

S. E. Bolt, John G. Merkle, J. W. Bryson, 1989 .

Effect of commercial cladding on the fracture behavior of pressure vessel steel plates

K. V. Cook, S. E. Bolt, S. K. Iskander, 1989 .

Results and conclusions from the first pressurized-thermal-shock experiment☆

S. E. Bolt, John G. Merkle, J. W. Bryson, 1984 .

Experimental verification of the behavior of surface flaws in thick-walled steel cylinders during severe thermal shock

R. D. Cheverton, S. E. Bolt, S. K. Iskander, 1981 .

Applicability of LEFM to the analysis of PWR vessels under LOCA-ECC thermal shock conditions

R. D. Cheverton, S. E. Bolt, S. K. Iskander, 1978 .

Behavior of surface flaws in reactor pressure vessels under thermal-shock loading conditions

R. D. Cheverton, S. E. Bolt, S. K. Iskander, 1981 .

Pressurized-thermal-shock test of 6-in. -thick pressure vessels. PTSE-1: investigation of warm prestressing and upper-shelf arrest. [PWR; BWR]

S. E. Bolt, John G. Merkle, J. W. Bryson, 1985 .