Jack Beuth

发表

Demonstration of an in situ on-chip tensile tester

Michael S. Baker, S. S. Hazra, Jack Beuth, 2009 .

Process Maps for Predicting Residual Stress and Melt Pool Size in the Laser-Based Fabrication of Thin-Walled Structures

Jack Beuth, Aditad Vasinonta, M. L. Griffith, 2007 .

Anomaly Detection and Classification in a Laser Powder Bed Additive Manufacturing Process using a Trained Computer Vision Algorithm

Jack Beuth, Luke Scime, J. Beuth, 2018 .

Safety and Workflow Considerations for Modern Metal Additive Manufacturing Facilities

Sandra DeVincent Wolf, Jack Beuth, Luke Scime, 2018 .

A process map for consistent build conditions in the solid freeform fabrication of thin-walled structures

Jack Beuth, Aditad Vasinonta, M. L. Griffith, 2001 .

Using coordinate transforms to improve the utility of a fixed field of view high speed camera for additive manufacturing applications

Jack Beuth, Luke Scime, Brian A. Fisher, 2018 .

Metal Additive Manufacturing: Cost Competitive Beyond Low Volumes

Erica R.H. Fuchs, Jack Beuth, Jaime Bonnin Roca, 2017 .

SOFTWARE AGENT-MONITORED TUTORIALS ENABLING COLLABORATIVE LEARNING IN COMPUTER-AIDED DESIGN AND ANALYSIS

Carolyn Penstein Rosé, Jack Beuth, Rohit Kumar, 2010 .

Web Based Computer Aided Engineering Tutorials Across The Mechanical Engineering Curriculum

Jack Beuth, Jonathan Wickert, 2004 .

Overview of Materials Qualification Needs for Metal Additive Manufacturing

John J. Lewandowski, Jack Beuth, Ola L. A. Harrysson, 2016 .

Power–Velocity Process Design Charts for Powder Bed Additive Manufacturing

Jonathan Cagan, Jack Beuth, Daniel R. Clymer, 2017 .

AC 2011-2488: USE OF SOFTWARE AGENT-MONITORED TUTORIALS TOGUIDESTUDENTLEARNINGINCOMPUTER-AIDEDDESIGN,ANAL- YSIS AND MATHEMATICS PROJECTS

Carolyn Penstein Rosé, Rohit Kumar, Richard Teare, 2011 .

Melt Pool Size and Stress Control for Laser-Based Deposition Near a Free Edge 196

Jack Beuth, M. L. Griffith, Pruk Aggarangsi, 2003 .

Synchrotron-Based X-ray Microtomography Characterization of the Effect of Processing Variables on Porosity Formation in Laser Power-Bed Additive Manufacturing of Ti-6Al-4V

Jack Beuth, Anthony D. Rollett, Sneha P. Narra, 2017 .

Separation of crack extension modes in orthotropic delamination models

Jack Beuth, J. Beuth, 1996 .

Thermomechanical Modeling of Successive Material Deposition in Layered Manufacturing

Cristina H. Amon, Jack Beuth, R. K. Chin, 1996 .

Evaluating the Effect of Processing Parameters on Porosity in Electron Beam Melted Ti-6Al-4V via Synchrotron X-ray Microtomography

Jack Beuth, Anthony D. Rollett, Sneha P. Narra, 2016 .

Transient Changes in Melt Pool Size in Laser Additive Manufacturing Processes

Jack Beuth, David D. Gill, Pruk Aggarangsi, 2004 .

A multi-scale convolutional neural network for autonomous anomaly detection and classification in a laser powder bed fusion additive manufacturing process

Jack Beuth, Luke Scime, J. Beuth, 2018, Additive Manufacturing.

Location specific solidification microstructure control in electron beam melting of Ti-6Al-4V

Jack Beuth, Anthony D. Rollett, Sneha P. Narra, 2018 .

Trends in Solidification Grain Size and Morphology for Additive Manufacturing of Ti-6Al-4V

Jack Beuth, Joy Gockel, Nathan W. Klingbeil, 2017 .

Process Maps for Controlling Residual Stress and Melt Pool Size in Laser-Based SFF Processes 200

Jack Beuth, Aditad Vasinonta, M. L. Griffith, 2000 .

Integrated control of solidification microstructure and melt pool dimensions in electron beam wire feed additive manufacturing of Ti-6Al-4V

Karen M. Taminger, Jack Beuth, Joy Gockel, 2014 .

Cracking of thin films bonded to elastic-plastic substrates

Jack Beuth, Nathan W. Klingbeil, J. Beuth, 1996 .

Scaling Effects in Laser-Based Additive Manufacturing Processes

Jack Beuth, James W. Sears, Andrew J. Birnbaum, 2004 .

Using machine learning to identify in-situ melt pool signatures indicative of flaw formation in a laser powder bed fusion additive manufacturing process

Jack Beuth, Luke Scime, J. Beuth, 2019, Additive Manufacturing.

Process Maps for Laser Deposition of Thin-Walled Structures

Jack Beuth, Aditad Vasinonta, M. L. Griffith, 1999 .

Toward determining melt pool quality metrics via coaxial monitoring in laser powder bed fusion.

Jack Beuth, Ho Yeung, Brian A. Fisher, 2018, Manufacturing letters.

Process Mapping for Qualification Across Multiple Direct Metal Additive Manufacturing Processes

Jack Beuth, Joy Gockel, Colt Montgomery, 2013 .

On the design of debond-resistant bimaterials: Part II: A comparison of free-edge and interface crack approaches

Jack Beuth, Nathan W. Klingbeil, J. Beuth, 2000 .

Measurement of interfacial toughness in thermal barrier coating systems by indentation

Jack Beuth, Aditad Vasinonta, J. Beuth, 2001 .

Prediction of lack-of-fusion porosity for powder bed fusion

Jack Beuth, P. Chris Pistorius, J. Beuth, 2017 .

Residual stress-induced warping in direct metal solid freeform fabrication

Cristina H. Amon, Jack Beuth, Nathan W. Klingbeil, 2002 .

Measurement and Modeling of Residual Stress-Induced Warping in Direct Metal Deposition Processes

Cristina H. Amon, Jack Beuth, Nathan W. Klingbeil, 1998 .

Understanding Ti-6 Al-4 V Microstructure Control in Additive Manufacturing via Process Maps

Jack Beuth, Joy Gockel, J. Beuth, 2013 .

Designation of Mode Mix in Orthotropic Composite Delamination Problems

Jack Beuth, J. Beuth, S. H. Narayan, 1998 .

Successive Deposition of Metals in Solid Freeform Fabrication Processes, Part 1: Thermomechanical Models of Layers and Droplet Columns

Cristina H. Amon, Jack Beuth, J. Beuth, 2001 .

Evaluation of Orientation Dependence of Fracture Toughness and Fatigue Crack Propagation Behavior of As-Deposited ARCAM EBM Ti-6Al-4V

John J. Lewandowski, Jack Beuth, Ola L. A. Harrysson, 2015 .

Process Scaling and Transient Melt Pool Size Control in Laser-Based Additive Manufacturing Processes 328

Jack Beuth, Pruk Aggarangsi, Andrew Birnbaum, 2003 .

Integrated melt pool and microstructure control for Ti–6Al–4V thin wall additive manufacturing

Jack Beuth, Joy Gockel, Jason C. Fox, 2015 .

Successive Deposition of Metals in Solid Freeform Fabrication Processes, Part 2: Thermomechanical Models of Adjacent Droplets

Cristina H. Amon, Jack Beuth, J. Beuth, 2001 .

Processing, thermal, and mechanical issues in shape deposition manufacturing

Lee E. Weiss, Fritz B. Prinz, Cristina H. Amon, 1995 .