Cengiz Camci

发表

Experimental Investigation and Computational Evaluation of Contoured Endwall and Leading Edge Fillet Configurations in a Turbine NGV

Özhan H. Turgut, Cengiz Camci, 2012 .

Vortex shedding from a ground tracking radar antenna and 3D tip flow characteristics

Cengiz Camci, Baris Gumusel, 2013 .

Tip Clearance Investigation of a Ducted Fan Used in VTOL Unmanned Aerial Vehicles—Part I: Baseline Experiments and Computational Validation

Cengiz Camci, Ali Akturk, 2014 .

PIV Measurements and Computational Study of a 5 -Inch Ducted Fan for V/STOL UAV Applications

Cengiz Camci, Ali Akturk, Akamol Shavalikul, 2009 .

Oscillator Fin as a Novel Heat Transfer Augmentation Device for Gas Turbine Cooling Applications

Oguz Uzol, Cengiz Camci, C. Camcı, 1998 .

Tip Clearance Investigation of a Ducted Fan Used in VTOL Unmanned Aerial Vehicles—Part II: Novel Treatments Via Computational Design and Their Experimental Verification

Cengiz Camci, Ali Akturk, 2014 .

TIP CLEARANCE INVESTIGATION OF A DUCTED FAN USED IN VTOL UAVS PART 1: BASELINE EXPERIMENTS AND COMPUTATIONAL VALIDATION

Cengiz Camci, Ali Akturk, 2011 .

A Nonaxisymmetric Endwall Design Methodology for Turbine Nozzle Guide Vanes and its Computational Fluid Dynamics Evaluation

Cengiz Camci, Özhan H. Turgut, 2011 .

A Computational Validation of Turbine Nozzle Guide Vane Aerodynamic Experiments in an HP Turbine Stage

Cengiz Camci, Özhan H. Turgut, 2011 .

Unsteady Flow Characteristics and Viscous Flow Losses Behind Multiple Rows of Circular Pin Fins in Coolant Channels

Cengiz Camci, Zeki Ozgur Gokce, 2011 .

Aerodynamic Loss Characteristics of a Turbine Blade With Trailing Edge Coolant Ejection: Part 1—Effect of Cut-Back Length, Spanwise Rib Spacing,

Cengiz Camci, Oguz Uzol, Boris Glezer, 2000 .

A Student-Executed Industrial Gas Turbine Design Project

Cengiz Camci, Boris Glezer, T. F. Miller, 1999 .

A Computational Visualization of Three Dimensional Flow: Finding Optimum Heat Transfer and Pressure Drop Characteristics From Short Cross-Pin Arrays and Comparison With Two Dimensional Calculations

Cengiz Camci, Anil K. Kulkarni, A. D. Belegundu, 1999 .

Aerodynamic character of partial squealer tip arrangements in an axial flow turbine. Part I: Detailed aerodynamic field modifications via three dimensional viscous flow simulations around baseline tip

Cengiz Camci, Levent Kavurmacioglu, Debashis Dey, 2007 .

Aerodynamic character of partial squealer tip arrangements in an axial flow turbine. Part II: Detailed numerical aerodynamic field visualisations via three dimensional viscous flow simulations around a partial squealer tip

Cengiz Camci, Levent Kavurmacioglu, Debashis Dey, 2007 .

A Time Efficient Adaptive Gridding Approach and Improved Calibrations in Five-Hole Probe Measurements

Cengiz Camci, Jason Town, C. Camcı, 2015 .

FOUNDATIONS OF FLUID MECHANICS AEROSPACE 508 FALL 2015

Cengiz Camci, 2015 .

A Genetic Algorithm Based Multi-Objective Optimization of Squealer Tip Geometry in Axial Flow Turbines: A Constant Tip Gap Approach

Emre Alpman, Cengiz Camci, Levent Kavurmacioglu, 2020, Journal of Fluids Engineering.

A Comparative Analysis of Pressure Side Extensions for Tip Leakage Control in Axial Turbines

Cengiz Camci, Akamol Shavalikul, 2008 .

Aerodynamic drag characteristics and shape design of a radar antenna used for airport ground traffic control

Cengiz Camci, Baris Gumusel, C. Camcı, 2010 .

Tip Clearance Investigation of a Ducted Fan Used in VTOL UAVS: Part 2—Novel Treatments via Computational Design and Their Experimental Verification

Cengiz Camci, Ali Akturk, 2011 .

Application of Artificial Neural Network for the Heat Transfer Investigation Around a High-Pressure Gas Turbine Rotor Blade

Cengiz Camci, Baris Gumusel, Ibrahim Eryilmaz, 2011 .

LIP SEPARATION AND INLET FLOW DISTORTION CONTROL IN DUCTED FANS USED IN VTOL SYSTEMS

Cengiz Camci, Ali Akturk, C. Camcı, 2014 .

Channel Wing as a Potential VTOL/STOL Aero-Vehicle Concept

Cengiz Camci, Zeki Ozgur Gokce, 2010 .

Determination of Optimal Row Spacing for a Staggered Cross-Pin Array in a Turbine Blade Cooling Passage

Cengiz Camci, Anil K. Kulkarni, A. D. Belegundu, 1998 .

Aerodynamic Loss Characteristics of a Turbine Blade With Trailing Edge Coolant Ejection: Part 2—External Aerodynamics, Total Pressure Losses, and Predictions

Oguz Uzol, Cengiz Camci, 2001 .

Aerodynamic Influence of Endwall Fences Located in the Vicinity of the Leading Edge-Endwall Junction of Nozzle Guide Vanes

Cengiz Camci, Zeki Ozgur Gokce, 2011 .

A nonaxisymmetric endwall design approach and its computational assessment in the NGV of an HP turbine stage

Cengiz Camci, Özhan H. Turgut, C. Camcı, 2015 .

Double Ducted Fan (DDF) as a Novel Ducted Fan Inlet Lip Separation Control Device

Cengiz Camci, Ali Akturk, C. Camcı, 2010 .

Computational Validation of the Flow Through a Turbine Stage and the Effects of Rim Seal Cavity Leakage on Secondary Flows

Cengiz Camci, Özhan H. Turgut, 2012 .

INLET FLOW DISTORTION AND LIP SEPARATION CONTROL IN DUCTED FANS Double Ducted Fan (DDF) as a Novel Lip Separation Control Concept

Cengiz Camci, Ali Akturk, C. Camcı, 2012 .

Influence of Leading Edge Fillet and Nonaxisymmetric Contoured Endwall on Turbine NGV Exit Flow Structure and Interactions With the Rim Seal Flow

Cengiz Camci, Özhan H. Turgut, 2013 .

Pressure Side Tip Platform Extensions for Tip Leakage Control in Axial Turbines

Cengiz Camci, 2008 .

Application of a Heat Flux/Calorimeter-Based Method to Assess the Effect of Turbulence on Turbine Airfoil Heat Transfer

Cengiz Camci, H. K. Moon, L. Zhang, 1994 .

A genetic algorithm based aerothermal optimization of tip carving for an axial turbine blade

Emre Alpman, Cengiz Camci, Levent Kavurmacioglu, 2019, International Journal of Heat and Mass Transfer.

Determination of Optimal Row Spacing for a Staggered Cross-Pin Array in a Turbine Blade Cooling Passage

Cengiz Camci, Anil K. Kulkarni, A. D. Belegundu, 1998 .

A New Hue Capturing Technique for the Quantitative Interpretation of Liquid Crystal Images Used in Convective Heat Transfer Studies

Kuisoon Kim, Cengiz Camci, S. A. Hippensteele, 1991 .

Experimental and Computational Assessment of a Ducted-Fan Rotor Flow Model

Cengiz Camci, Ali Akturk, C. Camcı, 2012 .

Factors Influencing Computational Predictability of Aerodynamic Losses in a Turbine Nozzle Guide Vane Flow

Cengiz Camci, Özhan H. Turgut, 2016 .

An Experimental and Numerical Investigation of Near Cooling Hole Heat Fluxes on a Film-Cooled Turbine Blade

Cengiz Camci, 1988 .

Heat Transfer, Pressure Loss and Flow Field Measurements Downstream of Staggered Two-Row Circular and Elliptical Pin Fin Arrays

Oguz Uzol, Cengiz Camci, C. Camcı, 2005 .

Passage Flow Structure and its Influence on Endwall Heat Transfer in a 90° Turning Duct: Turbulent Stresses and Turbulent Kinetic Energy Production

Cengiz Camci, Brian G. Wiedner, 1996 .

Adiabatic Film Cooling Effectiveness From Heat Transfer Measurements in Compressible, Variable-Property Flow

Cengiz Camci, Phil Ligrani, C. Camcı, 1985 .

Aerodynamic Loss Characteristics of a Turbine Blade With Trailing Edge Coolant Ejection: Part 2 — External Aerodynamics, Total Pressure Losses and Predictions

Oguz Uzol, Cengiz Camci, 2000 .

Mainstream Aerodynamic Effects due to Wheelspace Coolant Injection in a High-Pressure Turbine Stage: Part II — Aerodynamic Measurements in the Rotational Frame

Cengiz Camci, Boris Glezer, Christopher McLean, 2001 .

Experimental and computational visualization and frequency measurements of the jet oscillation inside a fluidic oscillator

Oguz Uzol, Cengiz Camci, 2002 .

Aerodynamics of Tip Leakage Flows Near Partial Squealer Rims in an Axial Flow Turbine Stage

Cengiz Camci, Levent Kavurmacioglu, Debashis Dey, 2005 .

An aerothermal study of the influence of squealer width and height near a HP turbine blade

Cengiz Camci, Levent Kavurmacioglu, Hidir Maral, 2018 .

Short-Duration Measurements and Numerical Simulation of Heat Transfer Along the Suction Side of a Film-Cooled Gas Turbine Blade

Tony Arts, Cengiz Camci, C. Camcı, 1985 .

Aerodynamic Tip Desensitization of an Axial Turbine Rotor Using Tip Platform Extensions

Cengiz Camci, Debashis Dey, 2001 .

Aerodynamic Loss Characteristics of a Turbine Blade With Trailing Edge Coolant Ejection: Part 1—Effect of Cut-Back Length, Spanwise Rib Spacing, Free-Stream Reynolds Number, and Chordwise Rib Length on Discharge Coefficients

Oguz Uzol, Cengiz Camci, Boris Glezer, 2001 .

Experimental heat transfer investigation around the film-cooled leading edge of a high-pressure gas turbine rotor blade

Tony Arts, Cengiz Camci, 1985 .

Determination of convective heat flux on steady-state heat transfer surfaces with arbitrarily specified boundaries

Cengiz Camci, B. G. Wiedner, 1996 .

Tip Leakage Flows Near Partial Squealer Rims in an Axial Flow Turbine Stage

Cengiz Camci, Levent Kavurmacioglu, Debashis Dey, 2003 .

Secondary flow and forced convection heat transfer near endwall boundary layer fences in a 90° turning duct

Cengiz Camci, Dean H Rizzo, 2002 .

Casing grooves to improve aerodynamic performance of a HP turbine blade

Cengiz Camci, Levent Kavurmacioglu, Hidir Maral, 2018 .

Elliptical Pin Fins as an Alternative to Circular Pin Fins for Gas Turbine Blade Cooling Applications: Part 1 — Endwall Heat Transfer and Total Pressure Loss Characteristics

Oguz Uzol, Cengiz Camci, C. Camcı, 2001 .

Analysis and quantification of a solid-state laser Doppler anemometer

Cengiz Camci, Christopher McLean, C. Camcı, 1995 .

Aerothermal optimization of squealer geometry in axial flow turbines using genetic algorithm

Emre Alpman, Cengiz Camci, Levent Kavurmacioglu, 2018 .

Liquid crystal thermography

Cengiz Camci, C. Camcı, 1996 .

TIP-LEAKAGE VORTEX MINIMIZATION IN DUCTED AXIAL FANS USING NOVEL PRESSURE SIDE TIP PLATFORM EXTENSIONS

Cengiz Camci, Ali Akturk, Turbomachinery Aero-Heat, 2007 .