Massimo Fragiacomo

发表

Identification and Model Update of the Dynamic Properties of the San Silvestro Belfry in L’Aquila and Estimation of Bell’s Dynamic Actions

Angelo Aloisio, Ilaria Capanna, Riccardo Cirella, 2020 .

Sensitivity analysis of subspace-based damage indicators under changes in ambient excitation covariance, severity and location of damage

Angelo Aloisio, Rocco Alaggio, Massimo Fragiacomo, 2020 .

Design of bilinear hysteretic isolation systems

Massimo Fragiacomo, S. Rajgelj, F. Cimadom, 2003 .

A Component Model for Cyclic Behaviour of Wooden Structures

Giovanni Rinaldin, Massimo Fragiacomo, 2014 .

Mechanical behavior of timber–concrete connections with inclined screws

Massimo Fragiacomo, Amedeo Gregori, Beatrice Berardinucci, 2017 .

Exploratory cyclic and dynamic numerical investigation for the assessment of the seismic vulnerability of Blockhaus shear walls under in-plane lateral loads

Claudio Amadio, Chiara Bedon, Giovanni Rinaldin, 2015 .

Finite Element assessment of the seismic performance of three dimensional Blockhaus buildings

Chiara Bedon, Massimo Fragiacomo, Giovanni Rinaldin, 2016 .

Assessment of structural interventions using Bayesian updating and subspace-based fault detection methods: the case study of S. Maria di Collemaggio basilica, L’Aquila, Italy

E. Antonacci, Angelo Aloisio, Rocco Alaggio, 2020 .

Long-Term Behavior of Posttensioned Timber Connections

Andrea Frangi, Flavio Wanninger, Massimo Fragiacomo, 2015 .

SEISMIC DESIGN OF CROSS-LAMINATED TIMBER BUILDINGS

John W. van de Lindt, Haibei Xiong, Hiroshi Isoda, 2018, Wood and Fiber Science.

Experimental investigations and design provisions of steel-to-timber joints with annular-ringed shank nails for Cross-Laminated Timber structures

Gerhard Schickhofer, Matteo Izzi, Massimo Fragiacomo, 2016 .

Grading of maritime pine from Sardinia (Italy) for use in cross-laminated timber

Massimo Fragiacomo, Barbara De Nicolo, Monica Valdes, 2017 .

Seismic resilience of plywood-coupled LVL wall panels

Stefano Pampanin, Andrew H. Buchanan, Massimo Fragiacomo, 2017, Engineering Structures.

(INTER/48-2-1) Proposal of a Eurocode-based method for the buckling design of timber log-walls

Claudio Amadio, Chiara Bedon, Massimo Fragiacomo, 2015 .

Effects of seismic sequences on structures with hysteretic or damped dissipative behaviour

Claudio Amadio, Giovanni Rinaldin, Massimo Fragiacomo, 2017 .

Non linear modelling of the three and seven storey X-lam buildings tested within the SOFIE Project

Claudio Amadio, Giovanni Rinaldin, Massimo Fragiacomo, 2014 .

Cyclic Behavior of CLT Wall Systems: Experimental Tests and Analytical Prediction Models

Ario Ceccotti, Massimo Fragiacomo, Igor Gavric, 2015 .

Comparison between rocking analysis and kinematic analysis for the dynamic out‐of‐plane behavior of masonry walls

Paulo B. Lourenço, Linda Giresini, Massimo Fragiacomo, 2015 .

Modal-Displacement Based Design: Procedural aspects and application to a multi-storey Blockhaus structure

Chiara Bedon, Massimo Fragiacomo, Martina Sciomenta, 2019 .

Numerical and analytical assessment of the buckling behaviour of Blockhaus log-walls under in-plane compression

Chiara Bedon, Massimo Fragiacomo, Chiara Bedon, 2015 .

Evaluation of the structural response under seismic actions using non-linear static methods

Claudio Amadio, Massimo Fragiacomo, S. Rajgelj, 2006 .

The effects of repeated earthquake ground motions on the non‐linear response of SDOF systems

Claudio Amadio, Massimo Fragiacomo, S. Rajgelj, 2003 .

Finite Element numerical analysis of hybrid connections for the reinforcement of timber-to-timber slabs

Chiara Bedon, Massimo Fragiacomo, Martina Sciomenta, 2019, SHATiS19.

q-factor estimation for timber Blockhaus buildings

Chiara Bedon, Matteo Izzi, Giovanni Rinaldin, 2016 .

Optimized Design of a Steel-Glass Parabolic Vault Using Evolutionary Multi-Objective Algorithms

Claudio Amadio, Massimo Fragiacomo, Pasquale Lucia, 2008 .

“Capacity seismic design of X-LAM wall systems based on connection mechanical properties.”

Massimo Fragiacomo, Igor Gavric, A Ceccotti, 2013 .

Numerical modelling of steel-to-timber joints and connectors for CLT structures

Andrea Polastri, Matteo Izzi, Giovanni Rinaldin, 2016 .

Cyclic behaviour of typical metal connectors for cross-laminated (CLT) structures

Ario Ceccotti, Massimo Fragiacomo, Igor Gavric, 2015 .

A component approach for the hysteretic behaviour of connections in cross‐laminated wooden structures

Claudio Amadio, Giovanni Rinaldin, Massimo Fragiacomo, 2013 .

Special Issue on Seismic Resistant Timber Structures

John W. van de Lindt, Massimo Fragiacomo, 2016 .

Experimental and Numerical Analysis of a Glass-to-Steel Joint

Claudio Amadio, Massimo Fragiacomo, O. De Luca, 2008 .

The new provisions for the seismic design of timber buildings in Europe

Roberto Tomasi, Maurizio Piazza, Massimo Fragiacomo, 2018, Engineering Structures.

Preface for the special issue on “Structures Rehabilitation”

Nuno Silvestre, Carla Ferreira, Jose M. Adam, 2016 .

Dynamic identification and model updating of an eight-storey CLT building

Angelo Aloisio, Massimo Fragiacomo, Roberto Tomasi, 2020, Engineering Structures.

On the accuracy of the N2 inelastic spectrum for timber structures

Claudio Amadio, Giovanni Rinaldin, Massimo Fragiacomo, 2017 .

The instructions for the design, execution and control of timber construction (CNR-DT 206 R1/2018)

Chiara Bedon, Carla Ceraldi, Benedetto Pizzo, 2019 .

Seismic design of a six-storey CLT building in Italy

Massimo Fragiacomo, M. Follesa, D. Vassallo, 2018, Engineering Structures.