Yoshimi Takeuchi

发表

Development of Electrode Feeding Drive Mechanism for Electrical Discharge Curved Hole Machining Using a Helical Compression Spring and Wires.

Tohru Ishida, Yoshimi Takeuchi, 1999 .

Evaluation of Polished Surface for Automation of Polishing Work

Yoshimi Takeuchi, Naoki Asakawa, Dong-fang Ge, 1993, Robotics, Mechatronics and Manufacturing Systems.

Development of CAM System for Non-rotating Machining of Curved Surface

Hiroshi Suzuki, Makoto Sato, Yoshimi Takeuchi, 1996 .

General Tool Setting Error Compensation Method for 5-axis Control Ultraprecision Machining

Koji Teramoto, Tohru Ishida, Toshiyuki Enomoto, 2007 .

A21 Development of CAD/CAM System for Cross Section's Changing Hole Electrical Discharge Machining : Creation of Postprocessor for Simultaneous 3-Axis Control Machining

Tohru Ishida, Keiichi Nakamoto, Yoshimi Takeuchi, 2010 .

Development of CAM System for High Speed Milling

Masahiro Anzai, Yoshimi Takeuchi, Tetsuro Sakamoto, 2001 .

Development of Main Procesor for 6-Axis Control Character Line Machining

Koichi Morishige, Yoshimi Takeuchi, Shugo Yasuda, 2002 .

D05 Dexterous Machining of Unstable Shape by Providing Support Pillars

Yoshimi Takeuchi, Yuki Nakata, 2014 .

Study on the Improvement of Motion Accuracy of 5 Axis Control Machining Center (Influence of the Rotating Axis Travelling Range on the Alignment Error)

Hidehito Ota, Yoshimi Takeuchi, Kensuke Ueda, 2011 .

6-Axis Control Sculptured Surface Finishing by Varying Cutting Edge Curvature due to Change in Tool Attitude.

Yoshimi Takeuchi, Kazuhiro Wada, 1997 .

5-Axis Control Machining by Use of Side-Milling Cutter.

Makoto Yokoyama, Yoshimi Takeuchi, Kouichi Morishige, 1994 .

Precision Machining Technologies in Foreign Countries

Yoshimi Takeuchi, 2007 .

Development of Ultraprecision Machining Center with Closed-Loop Structure and Its Control.

Toshio Sata, Yoshimi Takeuchi, Keisuke Imai, 1995 .

Development of CAD/CAM System for Cross Section's Changing Hole Electrical Discharge Machining *

Tohru Ishida, Keiichi Nakamoto, Yoshimi Takeuchi, 2010 .

421 Development of Electrical Discharge Curved Hole Machining Method : Shape Control by Means of Teaching Playback

Koji Teramoto, Tohru Ishida, Yoshimi Takeuchi, 2006 .

Metal Mold Manufacturing of Fresnel Lens by Use of Micro Grooving Technology

Toshio Sata, Yoshimi Takeuchi, Kiyoshi Sawada, 1998 .

Manufacture of fly-eye mirror in an extreme-ultraviolet lithography illumination system by means of ultraprecision diamond cutting

Yoshimi Takeuchi, Hideo Takino, Norio Shibata, 2002, SPIE Advanced Lithography.

Effective Tool Pass Generation Method for Roughing in Multi-axis Control Machining

Koji Teramoto, Tohru Ishida, Takeshi Umehara, 2007 .

Development of Ultraprecision Lathe and Compensation of Machining Error.

Kazuya Kato, Hiroyuki Shimizu, Hiroshi Yoshikawa, 1991 .

Development of Electrode Feed Mechanism for Electrical Discharge Curved Hole Machining Using Slider Crank Chains.

Tohru Ishida, Yoshimi Takeuchi, 2002 .

Three-Dimensional Shaping by Means of Ultraprecision Lathe.

Toshio Sata, Yoshimi Takeuchi, Kiyoshi Sawada, 1994 .

304 5-Axis Control Machining of Complicated Shapes Based on Configuration Space

Yoshimi Takeuchi, K. Morishige, T. Kobata, 2003 .

V-Shaped Microgrooving with Two Flat-Ends by 6-axis Control Machining

Koji Teramoto, Tohru Ishida, Toshiyuki Enomoto, 2007 .

Highly efficient manufacture of groove with sharp corner on adjoining surfaces by 6-axis control ultrasonic vibration cutting

Koichi Morishige, Yoshimi Takeuchi, Feliciano H. Japitana, 2005 .

High Precision and High Efficiency Machining of the Scroll Compressor Pieces : High Efficient Bottom Machining in Consideration of Surface Roughness

Kazuya Kato, Yukio Maeda, Toshio Yamanaka, 2004 .

126 Improvement of Ultraprecision Machining Center by Means of Laminarization

Yoshimi Takeuchi, Tomohiko Kawai, K. Sawada, 2003 .

A Study on Machining Error Estimation of Micro Complicated Shapes by On-machine Scanning Measurement

Keiichi Nakamoto, Yoshimi Takeuchi, Taira Kon, 2017 .

Study on an Interactive System for Conceptual and Basic Design of Machine Tool Structure

Tohru Ishida, Keiichi Nakamoto, Yoshimi Takeuchi, 2010 .

3504 Improvement of Size Reduced In-pipe Movable Mechanism for Curved Hole Electrical Discharge Machining and Extension of Curved Hole Length by Means of the Mechanism

Koji Teramoto, Tohru Ishida, Yoshimi Takeuchi, 2007 .

High Precision and High Efficiency Machining of the Scroll Compressor Pieces (Improvement of Machining Accuracy in Constant Cutting Point Control)

Kazuya Kato, Yukio Maeda, Toshio Yamanaka, 2005 .

Development of Curved Hole Electrical Discharge Machining System by Means of an Insect Type Microrobot: (Realization of Hole Fabrication by Use of Microrobot with Electrical Discharge Machining Function)@@@（放電加工機能を有したマイクロロボットによる穴創成の実現）

Tohru Ishida, Yoshimi Takeuchi, Masahiko Kita, 2017 .

Determination of Tool Path Using Curved Surface Interpalation for 5-Axis Control Machining

Koji Teramoto, Yoshimi Takeuchi, Tomoyasu Kobata, 2004 .

Ultraprecision Micro Machining of Structures with High Aspect Ratio.

Yoshimi Takeuchi, Kiyoshi Sawada, Tomohiko Kawai, 2002 .

Manufacture of diffraction grating on tiny parts by means of ultraprecision milling

Toshio Sata, Yoshimi Takeuchi, Kiyoshi Sawada, 1999 .

B10 A Study on Dexterous Machining of Soft Objects

Keiichi Nakamoto, Yoshimi Takeuchi, Ryota Ueji, 2012 .

Development of network communication software for machining processor

Koichi Morishige, Yoshimi Takeuchi, Keiichi Kodaka, 2002 .

Micro-Machining of Sculptured Surfaces by Lathe-type Ultra-precision Milling Machine.

Toshio Sata, Yoshimi Takeuchi, Kiyoshi Sawada, 1995 .

E16 Development of CAD/CAM System for Cross-Section Changing Hole Electric Discharge Machining : Creation of Postprocessor for 2-Dimensional Shape

Tohru Ishida, Yoshimi Takeuchi, Eiki Ishiguro, 2008 .

Micro Structuring of High Aspect Ratio and Array by Means of Mechanical Machining

Yoshimi Takeuchi, Kiyoshi Sawada, Tomohiko Kawai, 2002 .

Creation of long curved hole by means of electrical discharge machining using an in-pipe movable mechanism

Tohru Ishida, Yoshimi Takeuchi, Yasuhito Miyake, 2004 .

Manufacture of Multiple-focus Micro Fresnel Lenses by Means of Nonrotational Diamond Grooving

K. Sawada, Shinji Maeda, Yoshimi Takeuchi, 2002 .

Ultraprecision Milling. Sculptured Surface Generation.

Toshio Sata, Yoshimi Takeuchi, Shinichiro Kawakita, 1993 .

インタラクティブ加工システムをもとにした高品位部品の小ロット生産に関する研究(生産システムの設計・管理・評価)

Yoshimi Takeuchi, Koji Teramoto, 2004 .

Development of CAD/CAM System for Cross Section's Changing Hole Electrical Discharge Machining : Formulation of Post Processor for 2-Dimensional Shape( Norms the of Manufacturing and Machine Tools)

Yoshimi Takeuchi, Tohru Ishida, Yoshimi Takeuchi, 2009 .

On-Machine Diamond Tool Shaping to Realize Highly Efficient Ultraprecision Machining System

Meng Xu, Keiichi Nakamoto, Yoshimi Takeuchi, 2020 .

221 Development of Tool Setting Error Compensation Method for 5-Axis Control Ultraprecision Machining

Koji Teramoto, Tohru Ishida, Yoshimi Takeuchi, 2006 .

Application of an Ultraprecision Milling Machine Based on Friction-Free Drive Concept to Micromachining

Yoshimi Takeuchi, Kiyoshi Sawada, Tomohiko Kawai, 2001 .

Control of the Thermal Deformation of a Machine Tool (1st Report):Rapid Stabilization of a Machine Tool before Working

Yoshimi Takeuchi, Toshio Sata, Yoshimi Takeuchi, 1975 .

CAM for Multi-Axis Control and Multi-Tasking Machining

Yoshimi Takeuchi, 2011 .

Creation of ultraprecision microgrooves using non-rotational cutting tools

Shinji Maeda, Yoshimi Takeuchi, Kiyoshi Sawada, 2000 .

Development of a Cupped Diamond Wheel for Ultrasonic Surface Grinding. CAE Approach to the Optimal Design of the Wheel.

Yoshimi Takeuchi, Hiroyuki Shimizu, 1993 .

Production of Small Diameter Ball End Mill and Influence of Surface Treatment for Tool Wear

Masahiro Anzai, Yi Lu, Yoshimi Takeuchi, 2000 .

A Study on Influence Analysis of Tool Setting Errors for On-Machine Measurement in Multi-axis Control Ultraprecision Machining

Keiichi Nakamoto, Yoshimi Takeuchi, Taira Kon, 2016 .

6-Axis Control Finishing of Workpiece with Sculptured Surface.

Makoto Yokoyama, Makoto Sato, Yoshimi Takeuchi, 1994 .