Julio Guirao

发表

Standardized integration of ITER diagnostics Equatorial Port Plugs

Qiang Hu, Victor Udintsev, J. Ordieres, 2019, Fusion Engineering and Design.

Starting manufacturing phase of ITER upper ports

C. Sborchia, B. Levesy, Chang-Ho Choi, 2015 .

Rigid and adjustable fixation of the shielding modules into the ITER port plugs

Victor Udintsev, N. Casal, T. Giacomin, 2017 .

Weld distortion prediction of the ITER Vacuum Vessel using Finite Element simulations

Roberto Paoletti, L. Jones, Angel Bayon, 2013 .

Environmental conditions & loads of ITER diagnostic equipment in the port plug interspace & port cell

Jonathan Klabacha, Julio Guirao, Yuhu Zhai, 2015, 2015 IEEE 26th Symposium on Fusion Engineering (SOFE).

Development of design Criteria for ITER In-vessel Components

Julio Guirao, G. Sannazzaro, V. R. Barabash, 2013 .

Final design of the generic upper port plug structure for ITER diagnostic systems

Victor Udintsev, Russell Feder, D. Loesser, 2015 .

Development of Codes and Standards for ITER In-Vessel Components

J. Ordieres, Julio Guirao, E. Fernandez, 2011 .

Development and qualification of the ITER port plug handling process

Julio Guirao, J. P. Martins, B. Levesy, 2018, Fusion Engineering and Design.

Fracture mechanics analysis approach to assess structural integrity of the first confinement boundaries in ITER Generic Upper Port Plug structure

Victor Udintsev, Julio Guirao, Eduardo D. Rodriguez, 2015 .

The choice of dynamic amplification factors for the ITER generic port plugs during disruptions

Victor Udintsev, N. Casal, Julio Guirao, 2015 .

Electromagnetic analysis of ITER generic equatorial port plug designs during three plasma current disruption cases

J. Ordieres, Julio Guirao, M. F. Cabanas, 2012 .

Development of load specifications for the design of ITER diagnostic system and port integration

Victor Udintsev, Silvia Iglesias, Julio Guirao, 2017 .

Use of a new methodology for prediction of weld distortion and residual stresses using FE simulation applied to ITER vacuum vessel manufacture

Julio Guirao, L. Jones, E. Rodríguez, 2009 .

Engineering requirements due to the ESP/ESPN regulation apply at the port plug for ITER diagnostic system

Victor Udintsev, J. M. Drevon, Silvia Iglesias, 2015 .

FEM simulation of a small EB welded mock-up and new sequence proposed to improve the final distortions

Julio Guirao, L. Jones, E. Rodríguez, 2010 .

Thermo-hydraulic analysis of the generic equatorial port plug design

Silvia Iglesias, J. Ordieres, Julio Guirao, 2012 .

The use of the long modular diagnostics shield module to mitigate shutdown dose rates in the ITER diagnostics equatorial ports

Victor Udintsev, Michael Walsh, Javier Sanz, 2018 .

Final design of the ITER outer vessel steady-state magnetic sensors

Silvia Iglesias, Michael Walsh, Slavomir Entler, 2017 .