G Bergmann

发表

[Stress analysis of the shoulder blade following shoulder joint replacement].

A Rohlmann, U Mössner, R Eberlein, 1983, Biomedizinische Technik. Biomedical engineering.

Evaluation of Biomechanical Models for the Planning of Total Hip Arthroplasty

K Radermacher, G Bergmann, M Asseln, 2013, Biomedizinische Technik. Biomedical engineering.

[Effect of clamping tensile strength on load distribution in paired mounted spinal internal fixators].

A Rohlmann, G Bergmann, J Calisse, 1994, Biomedizinische Technik. Biomedical engineering.

[Telemetric transmission system for in vivo measurement of the stress load of an internal spinal fixator].

A Rohlmann, G Bergmann, F Graichen, 1994, Biomedizinische Technik. Biomedical engineering.

Multichannel strain gauge telemetry for orthopaedic implants.

A Rohlmann, G Bergmann, F Graichen, 1988, Journal of biomechanics.

[A telemetric transmission system for in vivo measuring of hip joint force with instrument-implanted prostheses].

G Bergmann, F Graichen, 1988, Biomedizinische Technik. Biomedical engineering.

Design and calibration of load sensing orthopaedic implants.

A Rohlmann, G Bergmann, F Graichen, 2008, Journal of biomechanical engineering.

Patient monitoring system for load measurement with spinal fixation devices.

A Rohlmann, G Bergmann, F Graichen, 1996, Medical engineering & physics.

Influence of shoes and heel strike on the loading of the hip joint.

A Rohlmann, G Bergmann, F Graichen, 1995, Journal of biomechanics.

Direct comparison of calculated hip joint contact forces with those measured using instrumented implants. An evaluation of a three-dimensional mathematical model of the lower limb.

G Bergmann, F Graichen, J P Paul, 2003, Journal of biomechanics.

Instrumented Forceps for Measuring Tensile Forces in the Rod of the VDS Implant During Correction of Scoliosis. Eine Zange zur intraoperativen Messung der Zugkräfte im Gewindestab des VDS-Instrumentariums bei der Skoliosekorrektur

A Rohlmann, G Bergmann, C Klöckner, 2003, Biomedizinische Technik. Biomedical engineering.

[Non-linear finite-element model for the determination of interface stresses in total hip prostheses].

A Rohlmann, G Bergmann, 1988, Biomedizinische Technik. Biomedical engineering.

Determination of muscle loading at the hip joint for use in pre-clinical testing.

G Bergmann, M O Heller, L Claes, 2005, Journal of biomechanics.

Four-channel telemetry system for in vivo measurement of hip joint forces.

G Bergmann, F Graichen, G. Bergmann, 1991, Journal of biomedical engineering.

[Stress on the elbow joint following alloplastic joint replacement].

A Rohlmann, G Bergmann, A Basli, 1986, Biomedizinische Technik. Biomedical engineering.

Measurement of shoulder joint loads during wheelchair propulsion measured in vivo.

A Rohlmann, G Bergmann, F Graichen, 2011, Clinical biomechanics.

[Effect of a double intervertebral cage on the mechanical behavior of the lumbar spine].

A Rohlmann, G Bergmann, C Klöckner, 2002, Biomedizinische Technik. Biomedical engineering.

Validation of the Delft Shoulder and Elbow Model using in-vivo glenohumeral joint contact forces.

G Bergmann, F Graichen, F C T van der Helm, 2010, Journal of biomechanics.

Finite-element-analysis and experimental investigation in a femur with hip endoprosthesis.

A Rohlmann, U Mössner, G Bergmann, 1983, Journal of biomechanics.

[Spinal load bearing during sitting in an office chair with a tilting back].

A Rohlmann, G Bergmann, F Graichen, 2002, Biomedizinische Technik. Biomedical engineering.

An instrumented implant for in vivo measurement of contact forces and contact moments in the shoulder joint.

A Rohlmann, G Bergmann, F Graichen, 2009, Medical engineering & physics.

Monitoring In Vivo Implant Loads With a Telemeterized Internal Spinal Fixation Device

A Rohlmann, G Bergmann, F Graichen, 2000, Spine.

Hip Joint Forces During Load Carrying

A Rohlmann, G Bergmann, F Graichen, 1997, Clinical orthopaedics and related research.

Influence of load carrying on loads in internal spinal fixators.

A Rohlmann, G Bergmann, F Graichen, 2000, Journal of biomechanics.

[Finite element analysis, its limitations and the relevance of its results to orthopaedic surgery as shown by simultaneous experimental measurements (author's transl)].

A Rohlmann, G Bergmann, R Kölbel, 1980, Zeitschrift fur Orthopadie und ihre Grenzgebiete.

Evaluation of ischial weight-bearing orthoses, based on in-vivo hip joint force measurements.

A Rohlmann, G Bergmann, F Graichen, 1994, Clinical biomechanics.

Applying a follower load delivers realistic results for simulating standing.

A Rohlmann, G Bergmann, G. Bergmann, 2009, Journal of biomechanics.

Hip endoprosthesis for in vivo measurement of joint force and temperature.

A Rohlmann, G Bergmann, F Graichen, 1999, Journal of biomechanics.

Internal spinal fixator stiffness has only a minor influence on stresses in the adjacent discs.

A Rohlmann, G Bergmann, J Calisse, 1999, Spine.

Loads on an internal spinal fixation device during walking.

A Rohlmann, G Bergmann, F Graichen, 1997, Journal of biomechanics.

Averaging of strongly varying signals.

G Bergmann, H Ruder, G. Bergmann, 2001, Biomedizinische Technik. Biomedical engineering.

Realistic loading conditions for upper body bending.

A Rohlmann, G Bergmann, G. Bergmann, 2009, Journal of biomechanics.

Analysis of Simulated Single Ligament Transection on the Mechanical Behaviour of a Lumbar Functional Spinal Unit / Rechnerische Analyse des Einflusses der Bänder auf das mechanische Verhalten eines Bewegungssegments der Lendenwirbelsäule

G Bergmann, G. Bergmann, A. Rohlmann, 2004, Biomedizinische Technik. Biomedical engineering.

Is It Possible to Simulate Physiologic Loading Conditions by Applying Pure Moments?: A Comparison of In Vivo and In Vitro Load Components in an Internal Fixator

A Rohlmann, G Bergmann, F Graichen, 2001, Spine.

How does the way a weight is carried affect spinal loads?

A Rohlmann, G Bergmann, F Graichen, 2014, Ergonomics.

[Musculoskeletal biomechanics of the knee joint. Principles of preoperative planning for osteotomy and joint replacement].

G Bergmann, M O Heller, C Perka, 2007, Der Orthopade.

A nonlinear finite element analysis of interface conditions in porous coated hip endoprostheses.

A Rohlmann, G Bergmann, W C Hayes, 1988, Journal of biomechanics.

Influence of Muscle Forces on Loads in Internal Spinal Fixation Devices

A Rohlmann, G Bergmann, F Graichen, 1998, Spine.

Influence of a Follower Load on Intradiscal Pressure and Intersegmental Rotation of the Lumbar Spine

L Claes, A Rohlmann, G Bergmann, 2001, Spine.

A comparison of hip joint forces in sheep, dog and man.

A Rohlmann, G Bergmann, J Siraky, 1984, Journal of biomechanics.

Frictional heating of total hip implants. Part 2: finite element study.

N Verdonschot, A Rohlmann, G Bergmann, 2001, Journal of biomechanics.

A spinal fixation device for in vivo load measurement.

A Rohlmann, G Bergmann, F Graichen, 1994, Journal of biomechanics.

Estimation of trunk muscle forces using the finite element method and in vivo loads measured by telemeterized internal spinal fixation devices.

A Rohlmann, G Bergmann, J Calisse, 1999, Journal of biomechanics.

Finite-element-analysis and experimental investigation of stresses in a femur.

A Rohlmann, U Mössner, G Bergmann, 1982, Journal of biomedical engineering.

Duration and frequency of every day activities in total hip patients.

M Honl, E Schneider, G Bergmann, 2001, Journal of biomechanics.

In vivo glenohumeral contact forces--measurements in the first patient 7 months postoperatively.

A Rohlmann, G Bergmann, F Graichen, 2007, Journal of biomechanics.

Loads on an internal spinal fixation device during sitting.

A Rohlmann, G Bergmann, F Graichen, 2001, Journal of biomechanics.

Hip joint forces in sheep.

A Rohlmann, G Bergmann, F Graichen, 1999, Journal of biomechanics.

[Loads acting on orthopaedic implants. Measurements and practical applications].

A Rohlmann, G Bergmann, F Graichen, 2007, Der Orthopade.

[The stresses in femur (author's transl)].

A Rohlmann, G Bergmann, R Kölbel, 1981, Zeitschrift fur Orthopadie und ihre Grenzgebiete.

Mediolateral force distribution at the knee joint shifts across activities and is driven by tibiofemoral alignment

G Bergmann, A Bender, G. Bergmann, 2017, The bone & joint journal.

Frictional heating of total hip implants. Part 1: measurements in patients.

N Verdonschot, A Rohlmann, G Bergmann, 2001, Journal of biomechanics.

Effects of stem design and material properties on stresses in hip endoprostheses.

A Rohlmann, U Mössner, G Bergmann, 1987, Journal of biomedical engineering.

Is staircase walking a risk for the fixation of hip implants?

A Rohlmann, G Bergmann, F Graichen, 1995, Journal of biomechanics.

Comparison of loads on internal spinal fixation devices measured in vitro and in vivo.

A Rohlmann, G Bergmann, F Graichen, 1997, Medical engineering & physics.

ISSLS Prize Winner: A Novel Approach to Determine Trunk Muscle Forces During Flexion and Extension: A Comparison of Data From an In Vitro Experiment and In Vivo Measurements

L Claes, A Rohlmann, G Bergmann, 2003, Spine.