Kazuo Sato

发表

Faster and exact implementation of the continuous cellular automaton for anisotropic etching simulations

Néstor Ferrando, Miguel A. Gosálvez, J. Cerdá, 2011 .

A Two-Stroke Cycle Gasoline Engine with Poppet Valves in the Cylinder Head - Part II

Kazuo Sato, Haruo Ukawa, Masamitsu Nakano, 1992 .

E221 Study of the reliable cooling method of CPU without cooling fan for the Desk-top PC

Kazuo Sato, Jiro Furuhashi, Atsushi Tsujimori, 2001 .

Improvement of Scramjet Combustor Performance at Hypervelocity Condition over Mach 10 Flight

Masahiro Takahashi, Kazuo Sato, Hideyuki Tanno, 2008 .

Wireless body area network system using antennas mounted inside automotive seats

Shin-ichiro Matsuzawa, Kazuo Sato, Koji Yamada, 2013, 2013 IEEE Antennas and Propagation Society International Symposium (APSURSI).

A Method on Improvement of Small Two-Stroke Cycle Engine for Industrial and Farm Use (3rd Report)

Kazuo Sato, Masamitsu Nakano, Kazuo Kido, 1979 .

HOW THE TOYOTA PRODUCTION SYSTEM WAS CREATED

Kazuo Sato, 2010 .

A mental health self-check system using nonlinear analysis of pulse waves

Kazuo Sato, Mayumi Oyama-Higa, Kazuyoshi Tanaka, 2008, 2008 IEEE International Conference on Systems, Man and Cybernetics.

Visual Experiment of In-cylinder Flow by Laser Sheet Method : Scavenging Flow of Two-stroke Engine with Poppet Valves

Kazuo Sato, Masamitsu Nakano, Kensuke Usui, 2003 .

Force Measurement Using Non-Restrained Models in a Shock Tunnel

Masahiro Takahashi, Kazuo Sato, Kazuhisa Fujita, 2011 .

Reliability assessment of the complete 3D etch rate distribution of Si in anisotropic etchants based on vertically micromachined wagon wheel samples

Kazuo Sato, Néstor Ferrando, Prem Pal, 2011 .

Quarter- and subquarter-micron deep-UV lithography with chemically amplified positive resist

Masafumi Asano, Kazuo Sato, Yasunobu Onishi, 1996, Advanced Lithography.

A Method of Separating Short-circuit Gas from Exhaust Gas in a Two-stroke Cycle Gasoline Engine (A Good Use of Exhaust Gas)

Kazuo Sato, Masamitsu Nakano, 1987 .

Octree-search Kinetic Monte Carlo

Miguel A. Gosálvez, Kazuo Sato, Risto M. Nieminen, 2010 .

A 34 Mb 3.3 V serial flash EEPROM for solid-state disk applications

Kazuo Sato, Sanjay Mehrotra, L. Goh, 1995, Proceedings ISSCC '95 - International Solid-State Circuits Conference.

S191014 Aeroheating test with a HRV capsule model in real-gas free-stream

Kazuo Sato, Keisuke Sawada, Yosuke Ogino, 2012 .

Superconductor rotor generatrix

Kazuo Sato, Masanori Arata, Mikio Kumagai, 1987 .

Discrete Choice Experiments

Kazuo Sato, Hideo Aizaki, Tomoaki Nakatani, 2014 .

A Method of Improving Small Two-Stroke Cycle Engine for Industrial and Farm Use (2nd Report)

Kazuo Sato, Masamitsu Nakano, Kazuo Kido, 1979 .

Development of a Self-Check System for Mental Health Using a Pulse Wave Mouse

Kazuo Sato, Mayumi Oyama-Higa, Kazuyoshi Tanaka, 2007, ICSOFT.

Experimental procurement of the complete 3D etch rate distribution of Si in anisotropic etchants based on vertically micromachined wagon wheel samples

Kazuo Sato, Néstor Ferrando, Hirotaka Hida, 2011 .

A Study on the Blowback and the Performance of Industrial and Farm Use Small Two-Stroke Cycle Engines (IInd Report)

Kazuo Sato, Kazuo Kido, Masamistu Nakano, 1976 .

Free-flight force measurement technique in a shock tunnel

Masahiro Takahashi, Kazuo Sato, Kazuhisa Fujita, 2012 .

Effect of Combustor Shape on Scramjet Characteristics at Hypervelocity Condition over Mach 10 Flight

Masahiro Takahashi, Kazuo Sato, Hideyuki Tanno, 2006 .

Design and Evaluation of Strain Gauge Force Balance with Short Test Duration

Kazuo Sato, Hideyuki Tanno, Tomoyuki Komuro, 2005 .

A Two-Stroke Cycle Gasoline Engine with Poppet Valves on the Cylinder Head

Kazuo Sato, Haruo Ukawa, Masamitsu Nakano, 1990 .

New KrF excimer laser process for improving novolac-type photoresist resolution

Kazuo Sato, Shinichi Ito, Makoto Nakase, 1990, Advanced Lithography.

Performance Characteristics of Scramjet Engine with Different Combustor Shapes at Hypervelocity Condition over Mach 10 Flight

Masahiro Takahashi, Kazuo Sato, Hideyuki Tanno, 2007 .

Study on the high speed scramjet characteristics at Mach 10 to 15 flight condition

Kazuo Sato, Tomoyuki Komuro, Katsuhiro Itoh, 2005 .

Experimental study on flow establishment in a large scale scramjet

Kazuo Sato, Hideyuki Tanno, Tomoyuki Komuro, 2001 .

Numerical Analysis of Experimental Results on the Surface Catalycity in HIEST

Kazuo Sato, Hideyuki Tanno, Tomoyuki Komuro, 2005 .

Observation of the Processes of Ignition and Combustion Flowfield Formation in a Supersonic Combustor with Presence of Stream wise Vortices

Kazuo Sato, Tomoyuki Komuro, Katsuhiro Itoh, 2006 .

Basic characteristics of the free-piston driven expansion tube JAXA HEK-X

Kazuo Sato, Kazuhiko Yamada, Hideyuki Tanno, 2016 .

A study of an estimation method for predicting the equivalent thermal conductivity of an electric coil

Kazuo Sato, H. Kanzaki, M. Kumagai, 1992 .

Hot Gas Side Heat Transfer Characteristics of LOX/H2 and LOX/HC Type Propellats

Kazuo Sato, Masaki Sasaki, Hiroshi Sakamoto, 1990 .

Characteristics of Heat Transfer to Nickel Plated Chamber Walls of High Pressure Rocket Combustors

Kazuo Sato, Masaki Sasaki, Hiroshi Sakamoto, 1991 .

Free-flight aerodynamic test of elliptic cone in Shock Tunnel

Kazuo Sato, Hideyuki Tanno, Tomoyuki Komuro, 2015 .

Free-flight tests of reentry capsule models in free-piston shock tunnel

Kazuo Sato, Tetsuya Yamada, Hideyuki Tanno, 2013 .

Aerodynamic force measurement on a large-scale model in a short duration test facility

Kazuo Sato, Hideyuki Tanno, Tomoyuki Komuro, 2005 .

EMPIRICAL CALCULATION MODEL OF THE ATOMIZATION OF A LIQUID SHEET AND A ROUND LIQUID JET IN A GASEOUS FLOW FIELD

Kazuo Sato, Hiroshi Sakamoto, Nobuyuki Yatsuyanagi, 1998 .