Masatsugu Takemoto

发表

Multi-phase Interleaved AC to DC Buck-boost Converter with Active Power Decoupling Function and Sliding-mode Control Strategy

Koji Orikawa, Satoshi Ogasawara, Soonhwan Hwang, 2019, 2019 10th International Conference on Power Electronics and ECCE Asia (ICPE 2019 - ECCE Asia).

Novel PWM Schemes With Multi SVPWM of Sensorless IPMSM Drives for Reducing Current Ripple

Satoshi Ogasawara, Masatsugu Takemoto, Minglei Gu, 2016, IEEE Transactions on Power Electronics.

Examination to make eddy current loss density uniform in divided Nd-Fe-B magnets of a high torque density motor with axial-gap structure

Satoshi Ogasawara, Masatsugu Takemoto, Ayato Nihonyanagi, 2015, 2015 IEEE 2nd International Future Energy Electronics Conference (IFEEC).

An active common-mode filter for reducing radiated noise from power cables

Koji Orikawa, Satoshi Ogasawara, Masatsugu Takemoto, 2017, 2017 IEEE 3rd International Future Energy Electronics Conference and ECCE Asia (IFEEC 2017 - ECCE Asia).

Consideration of 10kW in-wheel type axial-gap motor using ferrite permanent magnets

Satoshi Ogasawara, Wataru Hino, Masatsugu Takemoto, 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).

19 – Controllers and power electronics

Masatsugu Takemoto, 2005 .

Examination to enhance efficiency of V-shaped IPMSM using concentrated winding structure at high speed and high torque area

Satoshi Ogasawara, Masatsugu Takemoto, Ayato Nihonyanagi, 2016, 2016 IEEE Energy Conversion Congress and Exposition (ECCE).

15 – Switched reluctance bearingless motors

Masatsugu Takemoto, 2005 .

A Generator Control System for a Variable-Speed Micro Hydroelectric Power Generation

Hirohito Funato, Satoshi Ogasawara, Minoru Suzuki, 2009 .

Proposal of an active common-mode filter capable of reducing radiated EMI from power cables

Koji Orikawa, Satoshi Ogasawara, Masatsugu Takemoto, 2017 .

Operation characteristics of ferrite permanent magnet in-wheel axial-gap motor with coreless rotor structure for electric city commuters

Satoshi Ogasawara, Wataru Hino, Masatsugu Takemoto, 2013, 2013 IEEE Energy Conversion Congress and Exposition.

Equivalency of series-parallel hybrid system using planetary gear and hybrid system using EVT

Satoshi Ogasawara, Yuki Kubo, Masatsugu Takemoto, 2011, 8th International Conference on Power Electronics - ECCE Asia.

Experimental evaluation of magnetic suspension characteristics in a 5-axis active control type bearingless motor without a thrust disk for wide-gap condition

Akira Chiba, Tadashi Fukao, Masatsugu Takemoto, 2009, 2009 IEEE Energy Conversion Congress and Exposition.

Investigation of Miniaturization and Loss Reduction in a 5-axis Active Control Type Bearingless Canned Motor Pump Utilizing Passive Magnetic Bearings

Satoshi Ogasawara, Masatsugu Takemoto, Kazuya Miyamoto, 2015 .

Ferrite-magnet spoke-type IPMSM with W-shaped magnet placement

Satoshi Ogasawara, Masatsugu Takemoto, Kazuya Chiba, 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

A control method for three-phase to high-frequency single-phase matrix converter based on instantaneous input voltages

Satoshi Ogasawara, Masatsugu Takemoto, Takashi Hyodo, 2015, 2015 IEEE 2nd International Future Energy Electronics Conference (IFEEC).

The examination of pole geometry of consequent pole type ferrite PM axial gap motor with field winding

Satoshi Ogasawara, Masatsugu Takemoto, Akihiro Daikoku, 2017, 2017 IEEE International Electric Machines and Drives Conference (IEMDC).

Torque and suspension force in a bearingless switched reluctance motor

Hirofumi Akagi, Akira Chiba, Tadashi Fukao, 2006 .

Measurement of resistance characteristics of power cables in the very high frequency band for improving electromagnetic interference analysis

Satoshi Ogasawara, Masatsugu Takemoto, Yutaro Fujimori, 2013, 2013 1st International Future Energy Electronics Conference (IFEEC).

Development of frequency-analysis equipment capable of judging propagation direction of conductive EMI

Yoshitaka Iwaji, Satoshi Ogasawara, Masatsugu Takemoto, 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).

A study of simulation methods suitable for real-time simulators

Satoshi Ogasawara, Yuki Kubo, Masatsugu Takemoto, 2013 .

Examination of an axial-gap generator with ferrite permanent magnets realizing miniaturization and high output power of engine generators

Satoshi Ogasawara, Masatsugu Takemoto, Ayato Nihonyanagi, 2015, 2015 IEEE International Electric Machines & Drives Conference (IEMDC).

A simulation method using state transition matrix suitable for real-time simulators

Satoshi Ogasawara, Yuki Kubo, Masatsugu Takemoto, 2010, The 2010 International Power Electronics Conference - ECCE ASIA -.

A Possible Output Area of Torque and Suspension Force in a Switched Reluctance Type Bearingless Motor with One Phase Excitation

Hirofumi Akagi, Akira Chiba, Tadashi Fukao, 2004 .

A Feedback-Type Dead-Time Compensation Method for High-Frequency PWM Inverters and Its Characteristics

Masashi Ogawa, Satoshi Ogasawara, Masatsugu Takemoto, 2010 .

Active Power Decoupling Control of Bridge-less SEPIC using Lyapunov-function based Control Strategy

Koji Orikawa, Satoshi Ogasawara, Soonhwan Hwang, 2018, 2018 IEEE 4th Southern Power Electronics Conference (SPEC).

Suspension Characteristics of a Wide Gap Bearingless Motor with Cylindrical Rotor

Akira Chiba, Tadashi Fukao, Junichi Asama, 2008 .

Non-linear common-mode equivalent circuit for inverter-fed motor drive systems

Satoshi Ogasawara, Masatsugu Takemoto, Yizhanyi Tang, 2013, 2013 IEEE ECCE Asia Downunder.

Rotor design of a 150kW 6,000rpm/25,000rpm high speed induction motor for testing equipment of EV/HEV traction motors

Satoshi Ogasawara, Masatsugu Takemoto, Takafumi Nagaoka, 2015, 2015 18th International Conference on Electrical Machines and Systems (ICEMS).

Sensorless IPMSM position estimation based on multi SVPWM with elimination of inverter nonlinear effects

Satoshi Ogasawara, Masatsugu Takemoto, Minglei Gu, 2014 .

Prototype and characteristics measurement of bearingless motor with wide air gap structure

Tadashi Fukao, Masakatsu Nomura, Masatsugu Takemoto, 2010, The 2010 International Power Electronics Conference - ECCE ASIA -.

Power and efficiency measurements and design improvement of a 50kW switched reluctance motor for Hybrid Electric Vehicles

Akira Chiba, Satoshi Ogasawara, Nobukazu Hoshi, 2011, 2011 IEEE Energy Conversion Congress and Exposition.

Investigation of a 5-axis active control type magnetic suspension pump capable of generating thrust suspension force in both positive and negative direction with only one electromagnet

Satoshi Ogasawara, Masatsugu Takemoto, Masao Hiragushi, 2017, IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society.

A Hybrid Common-Mode Voltage Canceleration Using an Passive Filter and an Active Feedback Circuit for PWM Inverters

Koji Orikawa, Satoshi Ogasawara, Yushin Yamamoto, 2019, 2019 IEEE 4th International Future Energy Electronics Conference (IFEEC).

Novel PWM scheme with multiphase SVPWM for reducing current ripple

Satoshi Ogasawara, Masatsugu Takemoto, Minglei Gu, 2013, 2013 1st International Future Energy Electronics Conference (IFEEC).

A test result of a 50kW switched reluctance motor designed for a Hybrid Electric Vehicle

Akira Chiba, Satoshi Ogasawara, Nobukazu Hoshi, 2011, 2011 IEEE Power and Energy Society General Meeting.

A basic study on inverter output filter for radiative noise suppression

Satoshi Ogasawara, Masatsugu Takemoto, Jun Fukuda, 2010, The 2010 International Power Electronics Conference - ECCE ASIA -.

Energy Efficiency of SR and IPM Generators for Hybrid Electric Vehicle

Akira Chiba, Satoshi Ogasawara, Nobukazu Hoshi, 2015, IEEE Transactions on Industry Applications.

A novel method for making a 2D-FEA model considering three-dimensional effect equivalently in analysis of switched reluctance motors

Satoshi Ogasawara, Masatsugu Takemoto, Kazuki Makimura, 2016 .

Novel switched reluctance motor drive circuit with voltage boost function without additional reactor

Akira Chiba, Satoshi Ogasawara, Nobukazu Hoshi, 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

Development of a Rare-Earth-Free SR Motor With High Torque Density for Hybrid Vehicles

Akira Chiba, Satoshi Ogasawara, Nobukazu Hoshi, 2015, IEEE Transactions on Energy Conversion.

Experimental evaluation of a new PWM control scheme for matrix converters

Satoshi Ogasawara, Masatsugu Takemoto, Tomohiko Sanada, 2010, The 2010 International Power Electronics Conference - ECCE ASIA -.

A novel magnet polarity identification method for initial position estimation for sensorless IPMSM drive

Satoshi Ogasawara, Masatsugu Takemoto, Minglei Gu, 2014 .

Parameter identification of simplified common‐mode equivalent circuit for inverter‐fed motor drive systems by applying computer‐aided optimization software

Satoshi Ogasawara, Masatsugu Takemoto, Masaki Kanamori, 2016 .

Resonant Frequency Tracking Control for a Linear Compressor with Assist Springs

Satoshi Ogasawara, Masatsugu Takemoto, Wataru Hatsuse, 2020, 2020 IEEE Energy Conversion Congress and Exposition (ECCE).

A Feedback-Type Dead-Time Compensation Method for High-Frequency PWM Inverters with Low Distortion and High Voltage Utilization Factor Characteristics

Satoshi Ogasawara, Masashi Ogawa, Masatsugu Takemoto, 2013 .

A new active power‐decoupling topology and control mechanism to extend the lifespan and reduce the number of passive components

Koji Orikawa, Satoshi Ogasawara, Soonhwan Hwang, 2019 .

Research and Development of Rare-Earth-free-Motor for Hybrid Electrical Vehicles "Switched Reluctance Motor"

Akira Chiba, Nobukazu Hoshi, Satoshi Ogasawara, 2013 .

An inductance estimation method for sensorless IPMSM drives based on multiphase SVPWM

Satoshi Ogasawara, Masatsugu Takemoto, Minglei Gu, 2013, 2013 1st International Future Energy Electronics Conference (IFEEC).

A ferrite permanent magnet axial gap motor with segmented rotor structure for the next generation hybrid vehicle

Satoshi Ogasawara, Masatsugu Takemoto, A. Chiba, 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

A novel structure of a 3-axis active control type magnetic bearing with a cylindrical rotor

Satoshi Ogasawara, Masatsugu Takemoto, Kouhei Tsuchida, 2010, 2010 International Conference on Electrical Machines and Systems.

Experiments for a Prototype Machine with Proposed High Power Structure in a 5-axis Active Control Type Bearingless Canned Motor Pump

Satoshi Ogasawara, Masatsugu Takemoto, Kazuya Miyamoto, 2013 .

Lyapunov-function Based control of an AC/DC buck-boost converter with active power decoupling circuit

Koji Orikawa, Satoshi Ogasawara, Soonhwan Hwang, 2018, 2018 20th European Conference on Power Electronics and Applications (EPE'18 ECCE Europe).

Development of a high-frequency space vector pulse width modulated inverter with an active common-noise canceler

Satoshi Ogasawara, Masatsugu Takemoto, Masashi Ogawa, 2014, 2014 IEEE 36th International Telecommunications Energy Conference (INTELEC).

A Case Study of Suspension Characteristics of a Bearingless Motor Supplied by Inverters Having Different Voltage and Current Ratings

Akira Chiba, Tadashi Fukao, Junichi Asama, 2009 .

Fundamental characteristics of a ferrite permanent magnet axial gap motor with segmented rotor structure for the hybrid electric vehicle

Akira Chiba, Satoshi Ogasawara, Nobukazu Hoshi, 2011, 2011 IEEE Energy Conversion Congress and Exposition.

An examination for improvement of constant output characteristics at high-speed region in a spoke-type IPMSM using ferrite permanent magnet by changing the shape of rotor surface

Satoshi Ogasawara, Masatsugu Takemoto, Shoya Nagano, 2016, 2016 IEEE Energy Conversion Congress and Exposition (ECCE).

Operational characteristics of an IPM-type bearingless motor with 2-pole motor windings and 4-pole suspension windings

Satoshi Ogasawara, Masatsugu Takemoto, Satoru Ota, 2015, 2015 IEEE Energy Conversion Congress and Exposition (ECCE).

Size and Weight Reduction of an In-Wheel Axial-Gap Motor Using Ferrite Permanent Magnets for Electric Commuter Cars

Satoshi Ogasawara, Wataru Hino, Masatsugu Takemoto, 2017, IEEE Transactions on Industry Applications.

An Isolated AC/DC Converter Using a Matrix Converter: A Feedback Control Method Considering the Non-linearity of a Diode Rectifier

Koji Orikawa, Satoshi Ogasawara, Hiroyuki Tokusaki, 2020, IECON 2020 The 46th Annual Conference of the IEEE Industrial Electronics Society.

2017 IEE-Japan industry applications society conference

Satoshi Komada, Satoshi Ogasawara, Masatsugu Takemoto, 2017 .

Rotor structure in 50 kW spoke-type interior permanent magnet synchronous motor with ferrite permanent magnets for automotive applications

Satoshi Ogasawara, Masatsugu Takemoto, Wataru Kakihara, 2013, 2013 IEEE Energy Conversion Congress and Exposition.

Torque and Suspension Force in a Bearingless Switched Reluctance Motor

Hirofumi Akagi, Akira Chiba, Tadashi Fukao, 2004 .

A method of determining the advanced angle of square-wave currents in a bearingless switched reluctance motor

Akira Chiba, Tadashi Fukao, Masatsugu Takemoto, 2000 .

Investigation of enhancing efficiency and acceleration in a flat shape axial gap motor having high torque characteristic

Satoshi Ogasawara, Koji Yamada, Masatsugu Takemoto, 2017, 2017 IEEE International Conference on Mechatronics (ICM).

A Frequency Multiplying Circuit Containing a High-frequency Output Inverter and an Impedance Matching Transformer

Koji Orikawa, Satoshi Ogasawara, Masatsugu Takemoto, 2019, IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society.

A Proposal of Ultra-Flat Axial Gap Motor Employing C-type SMC Core

Satoshi Ogasawara, Masatsugu Takemoto, Tomoyuki Ueno, 2019, IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society.

An Active Common-noise Canceler Combined with Feedback Control

Koji Orikawa, Satoshi Ogasawara, Yushin Yamamoto, 2021 .

Selection of Rotor Retaining Sleeve Considering Loss Density and Prototype Machine Operating Characteristics in 2-pole Ultra-High-Speed Motors

Koji Orikawa, Akio Toba, Satoshi Ogasawara, 2021 .

Reduction in Eddy Current Loss of Concentrated Windings in High-power Density IPMSM Using Rectangular Windings

Koji Orikawa, Satoshi Ogasawara, Masatsugu Takemoto, 2021, 2021 22nd IEEE International Conference on Industrial Technology (ICIT).

Three-Phase to High-Frequency Single-Phase Matrix Converter : A Frequency Control Suitable for Soft Switching

Koji Orikawa, Satoshi Ogasawara, Hiroyuki Tokusaki, 2018, 2018 International Power Electronics Conference (IPEC-Niigata 2018 -ECCE Asia).

Investigation of Secondary Winding Structure in Multi-Core Transformer in MHz Inverter using Frequency Multiplying

Koji Orikawa, Satoshi Ogasawara, Jun-Ichi Itoh, 2018, 2018 IEEE Energy Conversion Congress and Exposition (ECCE).

Operational Characteristics of an IPM-Type Bearingless Motor With 2-Pole Motor Windings and 4-Pole Suspension Windings

Satoshi Ogasawara, Masatsugu Takemoto, Satoru Ota, 2017, IEEE Transactions on Industry Applications.

Verification of a novel 5-axis active control type bearingless canned motor pump utilizing passive magnetic bearing function for high power

Satoshi Ogasawara, Masatsugu Takemoto, Kazuya Miyamoto, 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).

Basic characteristic of a two-unit outer rotor type bearingless motor with consequent pole permanent magnet structure

Masatsugu Takemoto, 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).

A deeply-buried permanent magnet bearingless motor with 2-pole motor windings and 4-pole suspension windings

Hirofumi Akagi, Akira Chiba, Tadashi Fukao, 2003, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003..

Common-Mode Voltage Attenuation of an Active Common-Mode Filter in a Motor Drive System Fed by a PWM Inverter

Koji Orikawa, Satoshi Ogasawara, Masatsugu Takemoto, 2019, IEEE Transactions on Industry Applications.

Common-mode voltage attenuation of an active common-mode filter in a motor drive system fed by a PWM inverter

Koji Orikawa, Satoshi Ogasawara, Masatsugu Takemoto, 2019, 2017 20th International Conference on Electrical Machines and Systems (ICEMS).

Increasing the Operating Speed of a Consequent Pole Axial Gap Motor for Higher Output Power Density

Satoshi Ogasawara, Masatsugu Takemoto, Akihiro Daikoku, 2019, IEEJ Journal of Industry Applications.

Winding Design and Characteristic of a Consequent-Pole Type Bearingless Motor with 4-Axis Active Magnetic Suspension

Akira Chiba, Tadashi Fukao, Junichi Asama, 2007, 2007 IEEE Industry Applications Annual Meeting.

BasicCharacteristic oftheMulti-Consequent - PoleBearinglessMotor

Akira Chiba, Tadashi Fukao, Hiroya Sugimoto, 2007 .