Rex B. Thorpe

发表

Analysis and Monitoring The Impact of Second Generation Thermal Hydrolysis Process on Mesophilic Anaerobic Digestion Process performance

Sabeha Ouki, Nick Mills, Achame Shana, 2014 .

Assessment of Models for Liquid Jet Breakup

John W. Chew, Rex B. Thorpe, Colin Young, 2008 .

Large eddy simulation of flow fields in vessels stirred by dual rushton impeller agitators

Rex B. Thorpe, Zhipeng Li, Zhengming Gao, 2007 .

Experimental and CFD studies of a fluid flow in a draft-tube stirred tank

Rex B. Thorpe, Zhengming Gao, Jian Min, 2007 .

A life cycle assessment data analysis toolkit for the design of novel processes – A case study for a thermal cracking process for mixed plastic waste

Roland Clift, Jhuma Sadhukhan, Jonathan Seville, 2018 .

Method calculates sand velocity, hold-up in flowlines

Rex B. Thorpe, Paul Stevenson, R. B. Thorpe, 2002 .

Meta‐Model‐Based Calibration and Sensitivity Studies of Computational Fluid Dynamics Simulation of Jet Pumps

Yuan Yao, Tao Chen, Rex B. Thorpe, 2017 .

Incipient motion of a bed of particles resting on a submerged oscillating plate

Rex B. Thorpe, Paul Stevenson, R. B. Thorpe, 2004 .

Meta-model based calibration and sensitivity studies of CFD simulation of jet pumps

Yuan Yao, Tao Chen, Rex B. Thorpe, 2017 .

GAS DISPERSION AND SOLID SUSPENSION IN A THREE-PHASE STIRRED TANK WITH MULTIPLE IMPELLERS

Rex B. Thorpe, Zhengming Gao, J. M. Smith, 2006 .

Suspension of particles from the bottom of pipes and stirred tanks by gassed and ungassed flows

Rex B. Thorpe, Paul Stevenson, 2008 .

Investigating the effect of an alternative feedstock on the performance of sludge powered generators: developing a theoretical model and analysing trial data

Rex B. Thorpe, Simon Robson, R. B. Thorpe, 2017 .

The intermediate thermal hydrolysis process: results from pilot testing and techno-economic assessment

Sabeha Ouki, Nick Mills, Achame Shana, 2017 .

Hydrodynamic forces acting on pipe bends in gas-liquid slug flow

Rex B. Thorpe, R. B. Thorpe, Boon Li Tay, 2014 .

Theoretical and experimental testing of a scaling rule for air current segregation of alumina powder in cylindrical silos

Gisle G. Enstad, Rex B. Thorpe, Ugur Tüzün, 2008 .

Horizontal pneumatic conveying from a fluidized bed

Rex B. Thorpe, J. A. Woods, S. E. Johnson, 2008 .

Liquid recirculation and bubble breakup beneath ventilated gas cavities in downward pipe flow

Rex B. Thorpe, P. M. Machniewski, Geoffrey M. Evans, 2001 .

Kriging meta‐model assisted calibration of computational fluid dynamics models

Yuan Yao, Rex B. Thorpe, Bo Wang, 2016 .

An experimental study of the wear at hopper walls

Glen Corder, Rex B. Thorpe, 1995 .

A Thermodynamic Model of the Outputs of Gasification of Solid Waste

Adisa Azapagic, Rex B. Thorpe, A. Azapagic, 2008 .

Effects of Liquid Physical Properties on the Forces Acting on a Pipe Bend in Gas–Liquid Slug Flow

Rex B. Thorpe, R. B. Thorpe, Boon Li Tay, 2004 .

A novel method for measuring the residence time distribution in short time scale particulate systems

Rex B. Thorpe, Andrew T. Harris, John F. Davidson, 2002 .

Stochastic modelling of the particle residence time distribution in circulating fluidised bed risers

Rex B. Thorpe, Andrew T. Harris, John F. Davidson, 2002 .

Particle residence time distributions in circulating fluidised beds

Rex B. Thorpe, Andrew T. Harris, John F. Davidson, 2003 .

Influence of exit geometry in circulating fluidized‐bed risers

Rex B. Thorpe, Andrew T. Harris, John F. Davidson, 2003 .

A Comparison of Gasification with Pyrolysis for the Recycling of Plastic Containing Wastes

Rex B. Thorpe, R. Ray, Ruby Ray, 2007 .

Gas–solids flow in the diffuser of a circulating fluidised bed riser

Rex B. Thorpe, John F. Davidson, R. B. Thorpe, 2000 .

Vertical plug-flow pneumatic conveying from a fluidised bed

Rex B. Thorpe, John F. Davidson, Roger Watson, 2012 .

Statistical analysis of the hydrodynamic forces acting on pipe bends in gas–liquid slug flow and their relation to fatigue

Rex B. Thorpe, R. B. Thorpe, Boon Li Tay, 2015 .

Flow regime transitions due to cavitation in the flow through an orifice

Rex B. Thorpe, R. B. Thorpe, R. Thorpe, 1990 .

The influence of the riser exit on the particle residence time distribution in a circulating fluidised bed riser

Rex B. Thorpe, Andrew T. Harris, John F. Davidson, 2003 .

Flow patterns in the square cross-section riser of a circulating fluidised bed and the effect of riser exit design

Rex B. Thorpe, John F. Davidson, R. B. Thorpe, 2000 .

Measurement of bubble size distribution: an acoustic technique

Aniruddha B. Pandit, Rex B. Thorpe, John F. Davidson, 1992 .

HEAT TRANSFER MODELLING OF TWO-PHASE BUBBLES SWARM CONDENSING IN THREE-PHASE DIRECT-CONTACT CONDENSER

Adel O. Sharif, Hameed B. Mahood, Rex B. Thorpe, 2014 .

An experimental clue to the importance of dilation in determining the flow rate of a granular material from a hopper or bin

Rex B. Thorpe, R. Thorpe, 1992 .

Discharge and transport of nearly buoyant granular solids in liquids Part I: Tomographic study of the interstitial voidage effects governing flow regimes

Rex B. Thorpe, Ugur Tüzün, D.L.O. Smith, 1998 .

The effect of interstitial air pressure gradients on the discharge from bins

Rex B. Thorpe, R. M. Nedderman, R. B. Thorpe, 1983 .

Heat transfer measurement in a three-phase direct-contact condenser under flooding conditions

Adel O. Sharif, Hameed B. Mahood, Rex B. Thorpe, 2016 .

The prediction of particle cluster properties in the near wall region of a vertical riser (200157)

Rex B. Thorpe, Andrew T. Harris, John F. Davidson, 2002 .

Energy Dissipation at the Slug Nose and the Modeling of Solids Transport in Intermittent Flow

Rex B. Thorpe, Paul Stevenson, R. B. Thorpe, 2008 .