Karl T. Chuang

发表

An Intelligent design environment for conceptual process design

Ming Rao, Q. Wang, J. Y. Zhu, 1995 .

Knowledge-based automation for energy conservation and indoor air quality control in HVAC processes

Ming Rao, Karl T. Chuang, Hong Zhou, 1993 .

Development of a Novel Vertical-Sheet Structured Packing

Artin Afacan, Krishnaswamy Nandakumar, Karl T. Chuang, 2005 .

An expert system for selecting a vapour‐liquid contactor

Karl T. Chuang, M. Rao, G. X. Chen, 1992 .

Mechatronic Techniques in Intelligent Heating, Ventilating and Air Conditioning Systems

Ming Rao, Karl T. Chuang, Hong Zhou, 2000 .

CFD modeling of columns equipped with structured packings: I. Approach based on detailed packing geometry

Krishnaswamy Nandakumar, Karl T. Chuang, A. Afacan, 2007 .

Artificial Intelligence Approach to Energy Management and Control in the HVAC Process: An Evaluation, Development and Discussion

Hong Zhou, Ming Rao, Karl T. Chuang, 2008 .

Intelligent System for Design of Heat Exchanger Networks with Improved Controllability

Karl T. Chuang, M. Rao, J. Y. Zhu, 1994 .

CFD modeling of flow patterns and hydraulics of commercial‐scale sieve trays

Karl T. Chuang, Krishnaswamy Nandakumar, Getye Gesit, 2003 .

Intelligent system for indoor air quality control

Ming Rao, Karl T. Chuang, Hong Zhou, 1994 .

The evaluation of out-of-level trays for the improvement of industry guidelines

Karl T. Chuang, W. Y. Svrcek, D. Remesat, 2005 .

Identification of heat load loops and downstream paths in heat exchanger networks

Karl T. Chuang, J. Y. Zhu, Z. Han, 1996 .

A fundamental model for prediction of sieve tray efficiency

Artin Afacan, Karl T. Chuang, Sultana R. Syeda, 2007 .

Kinetics and Mechanism of Oxidation of Hydrogen Sulfide by Concentrated Sulfuric Acid

Karl T. Chuang, Hui Wang, K. Chuang, 2002 .

Improved coking resistance of direct ethanol solid oxide fuel cells with a Ni–Sx anode

Karl T. Chuang, Jing-Li Luo, Jingli Luo, 2014 .

CFD Simulation of Mass Transfer Efficiency and Pressure Drop in a Structured Packed Distillation Column

Karl T. Chuang, A. Afacan, K. Nandakumar, 2007 .

Model development for a SOFC button cell using H2S as fuel

Krishnaswamy Nandakumar, Karl T. Chuang, Dayadeep S. Monder, 2006 .

CFD modeling of mass-transfer processes in randomly packed distillation columns

Karl T. Chuang, A. Afacan, K. Nandakumar, 2000 .

Predicting liquid flow profile in randomly packed beds from computer simulation

Krishnaswamy Nandakumar, Karl T. Chuang, X. Wen, 2001 .

Effect of Catalyst Shape on the Hydrolysis of COS and CS2 in a Simulated Claus Converter

Karl T. Chuang, I. Lana, K. Chuang, 1997 .

A New Method To Determine the Best Units for Breaking Heat Load Loops of Heat Exchanger Networks

Karl T. Chuang, K. Chuang, J. Y. Zhu, 1999 .

Geometrical modeling of microstructure of solid oxide fuel cell composite electrodes

Krishnaswamy Nandakumar, Karl T. Chuang, X. Wen, 2008 .

Porosity distribution in random packed columns by gamma ray tomography

Artin Afacan, Karl T. Chuang, K. Nandakumar, 2001 .

A three-dimensional model for simulating the maldistribution of liquid flow in random packed beds

Karl T. Chuang, K. Nandakumar, F. H. Yin, 1998 .

Determining the number of gas-phase and liquid-phase transfer units from point efficiencies in distillation

Karl T. Chuang, Guang X. Chen, 1994 .

Liquid holdup distribution in packed columns: gamma ray tomography and CFD simulation

Artin Afacan, Krishnaswamy Nandakumar, Karl T. Chuang, 2002 .

Effect of substitution with Cr3+ and addition of Ni on the physical and electrochemical properties of Ce0.9Sr0.1VO3 as a H2S-active anode for solid oxide fuel cells

Karl T. Chuang, Nemanja Danilovic, Jing-Li Luo, 2009 .

Efficiency of dualflow trays in distillation

Artin Afacan, Karl T. Chuang, Zhanping Xu, 1994 .

Model for Liquid Phase Flow on Sieve Trays

Krishnaswamy Nandakumar, Karl T. Chuang, B. Mehta, 1998 .

Modelling and Simulation of Flow Maldistribution in Random Packed Columns with Gas-Liquid Countercurrent Flow

Artin Afacan, Krishnaswamy Nandakumar, Karl T. Chuang, 2000 .

Novel layered solid oxide fuel cells with multiple-twinned Ni0.8Co0.2 nanoparticles: the key to thermally independent CO2 utilization and power-chemical cogeneration

Jian Li, Partha Sarkar, Meng Li, 2016 .

Mass transfer in structured corrugated packing

Karl T. Chuang, K. Chuang, Zhanping Xu, 1991 .

Design of a Process for Production of Isopropyl Alcohol by Hydration of Propylene in a Catalytic Distillation Column

Karl T. Chuang, K. Chuang, A. R. Sanger, 2002 .

Prediction of point efficiency for sieve trays in distillation

Karl T. Chuang, Guangying Chen, K. Chuang, 1993 .

Liquid-Phase Resistance to Mass Transfer on Distillation Trays

Karl T. Chuang, Guang X. Chen, 1995 .

Effect of internal diffusion on heterogeneous catalytic esterification of acetic acid

Karl T. Chuang, Zhenghe Xu, K. Chuang, 1997 .

Kinetics of acetic acid esterification over ion exchange catalysts

Karl T. Chuang, K. Chuang, Zhanping Xu, 1996 .

Appraisal of catalysts for the hydrolysis of carbon disulfide

Karl T. Chuang, I. Lana, K. Chuang, 1992 .

Kinetics of wet oxidation of black liquor over a Pt–Pd–Ce/alumina catalyst

Karl T. Chuang, Qinglin Zhang, Qinglin Zhang, 1998 .

Prediction of packed sieve tray efficiency in distillation

Artin Afacan, Karl T. Chuang, Zhenghe Xu, 1996 .

Predicting geometrical properties of random packed beds from computer simulation

Krishnaswamy Nandakumar, Karl T. Chuang, K. Nandakumar, 1999 .