Igor Fernández de Bustos

发表

An efficient LDU algorithm for the minimal least squares solution of linear systems

Igor Fernández de Bustos, V. García-Marina, G. Urkullu, 2018, J. Comput. Appl. Math..

An alternative full-pivoting algorithm for the factorization of indefinite symmetric matrices

Ruben Ansola, Igor Fernández de Bustos, Josu Agirrebeitia, 2015, J. Comput. Appl. Math..

Implementation of Linear Springs and Dampers in a Newmark Second Order Direct Integration Method for 2D Multibody Dynamics

Igor Fernández de Bustos, Haritz Uriarte, Gorka Urkullu, 2019 .

On Classical Newmark Integration of Multibody Dynamics

Igor Fernández de Bustos, Haritz Uriarte, Gorka Urkullu, 2018, EuCoMeS 2018.

A new finite element approach for the analysis of slewing bearings in wind turbine generators using superelement techniques

Josu Aguirrebeitia, Mikel Abasolo, Igor Fernández de Bustos, 2015 .

Static Load Carrying Capacity in Four Contact Point Slewing Bearings: Theoretical and Preliminary Finite Element Calculations

Josu Aguirrebeitia, Mikel Abasolo, Igor Fernández de Bustos, 2010 .

A Tetraparametric Metamodel for the Simulation and Optimization of Bolting Sequences for Wind Generator Flanges

Josu Aguirrebeitia, Mikel Abasolo, Igor Fernández de Bustos, 2010 .

Solving the Minimum Distance Problem for the Synthesis of Mechanisms

Igor Fernández de Bustos, Gorka Urkullu, Vaness García Marina, 2017 .

An Error Function for Optimum Dimensional Synthesis of Mechanisms Using Genetic Algorithms

Josu Aguirrebeitia, Igor Fernández de Bustos, Vicente Gómez-Garay, 2004 .

Methodology for the Optimization of Bolting Sequences for Wind Generator Flanges

Josu Aguirrebeitia, Mikel Abasolo, Igor Fernández de Bustos, 2014 .

Direct integration of the equations of multibody dynamics using central differences and linearization

Igor Fernández de Bustos, Haritz Uriarte, Gorka Urkullu, 2019 .

Calculation of General Static Load-Carrying Capacity for the Design of Four-Contact-Point Slewing Bearings

Josu Aguirrebeitia, Mikel Abasolo, Igor Fernández de Bustos, 2010 .

A Tetraparametric Metamodel for the Analysis and Design of Bolting Sequences for Wind Generator Flanges

Josu Aguirrebeitia, Igor Fernández de Bustos, Rafael Avilés, 2011 .

Simultaneous measurement of forces and machine tool position for diagnostic of machining tests

Jose Antonio Sanchez, Luis Norberto López de Lacalle, Aitzol Lamikiz, 2005, IEEE Transactions on Instrumentation and Measurement.

General static load-carrying capacity for the design and selection of four contact point slewing bearings: Finite element calculations and theoretical model validation

Josu Aguirrebeitia, Mikel Abasolo, Igor Fernández de Bustos, 2012 .

A new APF strategy for path planning in environments with obstacles

Igor Fernández de Bustos, Goizalde Ajuria, J. Agirrebeitia, 2005 .

Theoretical calculation of general static load-carrying capacity for the design and selection of three row roller slewing bearings

Josu Aguirrebeitia, Mikel Abasolo, Igor Fernández de Bustos, 2012 .

A method for the study of position in highly redundant multibody systems in environments with obstacles

Igor Fernández de Bustos, Josu Agirrebeitia, Goizalde Ajuria, 2002, IEEE Trans. Robotics Autom..

Eigensensitivity-Based Optimal Damper Location in Variable Geometry Trusses

Josu Aguirrebeitia, Igor Fernández de Bustos, Rafael Avilés, 2009 .

Optimization of linkages for generalized rigid-body guidance synthesis based on finite element models

Josu Aguirrebeitia, Igor Fernández de Bustos, Goizalde Ajuria, 2010 .

Eigensensitivity Analysis in Variable Geometry Trusses

Josu Aguirrebeitia, Igor Fernández de Bustos, Rafael Avilés, 2011 .

Optimum synthesis of planar linkages using a strain-energy error function under geometric constraints

Josu Aguirrebeitia, Igor Fernández de Bustos, Goizalde Ajuria, 2010 .

A reduced eigenproblem formulation for Variable Geometry Trusses

Josu Aguirrebeitia, Igor Fernández de Bustos, Rafael Avilés, 2012 .