Shyong Lee

发表

Simulation and analysis of through-mask electrochemical machining with moving tools

Chin-Wei Liu, Chian-Huei Chen, Shyong Lee, 2021, Advances in Mechanical Engineering.

Isothermal sheet formability of magnesium alloy AZ31 and AZ61

Shyong Lee, Y. Chen, Shyong Lee, 2002 .

Mechanical and anisotropic behaviors of Mg-Li-Zn alloy thin sheets

Horng-Yu Wu, Chui-Hung Chiu, Shyong Lee, 2008 .

Friction Drilling of IN-713LC Cast Superalloy

Biing-Hwa Yan, Shyong Lee, H. Chow, 2007 .

Solid-state bonding of iron-based alloys, steel–brass, and aluminum alloys

Horng-Yu Wu, Shyong Lee, Shyong Lee, 1998 .

An oscillation-free actuation of fluidic lens for optical beam control

Yiin-Kuen Fuh, Wei-Chi Huang, Shyong Lee, 2012 .

High temperature oxidation behavior of interconnect coated with LSCF and LSM for solid oxide fuel cell by screen printing

Ming-Jui Tsai, Chun-Lin Chu, Shyong Lee, 2010 .

Finite element analysis of strain conditions after equal channel angular extrusion

Shyong Lee, Shyong Lee, Yi-Lang Yang, 2003 .

Isothermal Gas Forming of Mg Alloy AZ31 Sheet

Shyong Lee, Yung-Hung Chen, Jian-Yih Wang, 2009 .

Effect of lubrication on deformation characteristics of a superplastic 5083 Al alloy during bi-axial deformation

Horng-Yu Wu, Chui-Hung Chiu, Shyong Lee, 2006 .

Thermal effective stress concentration problems in metal composites

Jeff Wolfenstine, Hsi-Ming Pan, Shyong Lee, 1992 .

Characterizing aberration of a pressure-actuated tunable biconvex microlens with a simple spherically-corrected design

Yiin-Kuen Fuh, Shyong Lee, Ming-Xin Lin, 2012 .

General aspheric refractive micro‐optics fabricated by optical lithography using a high energy beam sensitive glass gray‐level mask

Pin Long, Chuck Wu, Walter Daschner, 1996 .