Toshio Hattori

发表

Simple Modelling and Strength Evaluation Methods for Bolt Joints Using Shell Elements and Beam Elements (2nd Report, Strength Evaluation Method)*

Tomohiro Naruse, Takeshi Kawasaki, Toshio Hattori, 2007 .

Sliding and Loosening Behavior of Thread Joints under Transverse Loading

Minoru Yamashita, Naoya Nishimura, Toshio Hattori, 2007 .

A Study of Analysis Method of Bolt Joint

Toshio Hattori, Tomohiro Naruse, Takashi Yamaguchi, 2004 .

Fatigue strength/life estimations based on the critical distance stress theory

Toshio Hattori, Minoru Yamashita, Muhammad Amiruddin Bin Ab Wahab, 2013 .

Fatigue Life Evaluation under Service Loading by Frequency Domain Method

Naoya Nishimura, Toshio Hattori, Norio Takeda, 2008 .

Loosening Evaluation of Bolt-Nut Fastener Under Transverse Cyclic Loading

Takeru Watanabe, Toshio Hattori, Naoya Nishimura, 2013 .

J0402-1-2 Monitoring system of fastening force and loosening behavior for bolted joints

Minoru Yamashita, Takahiro Kondoh, Toshio Hattori, 2009 .

Simulation of fretting-fatigue life by using stress-singularity parameters and fracture mechanics

Takashi Watanabe, M. Nakamura, Toshio Hattori, 2003 .

601 Basic Experiment of Joining Method Using High-Speed Shearing

Minoru Yamashita, Toshio Hattori, Tatsuya Tezuka, 2012 .

Optimum Design of Rotational Wheels Under Transient Thermal and Centrifugal Loading

Toshio Hattori, Hiroo Ohnishi, 1989 .

A new and simplified method for estimating residual stress in welded structures with complicated shape using inherent strain

Masahito Mochizuki, Toshio Hattori, M. Hayashi, 1997 .

Development of light simulation ride capsule using CFRP

Toshio Hattori, Masaaki Iwasa, Susumu Osada, 2000 .

Optimum Design Technique for Rotating Wheels

Toshio Hattori, Motoharu Taneda, Hiroo Ohnishi, 1986 .

Development of a Thermal Insulating Support System Using Fiber-Reinforced Plastics for MAGLEV Trains.

Tadashi Sonobe, Hiroshi Aoyama, Hiroyuki Watanabe, 1996 .

Simple Modelling and Strength Evaluation Methods for Bolt Joints Using Shell Elements and Beam Elements

Takeshi Kawasaki, Toshio Hattori, Tomohiro Naruse, 2009 .

Optimization of Dumping Structures for Electronics Equipment

Toshio Hattori, Motohiro Ishiwata, 2000 .

IGTC-94 Optimum Design of Turbo-Machinery Wheels under Transient Thermal and Centrifugal Loadings(Session C-6 STRENGTH AND VIBRATION)

Toshio Hattori, Hiroo Ohnishi, S. Sakata, 1987 .

Standardizing of Strength Evaluation Methods using Stress Singularity Parameters

Takashi Watanabe, Toshio Hattori, 2000 .

201 Monitoring system of the fastening force and looseness of the hub bolt using semiconductor strain sensor

Minoru Yamashita, Toshio Hattori, Yoshimizu Iida, 2009 .

OS1711 Development of Load Cell Using the Semiconductor Strain Sensor for Measurement Clamping Force of Jig

Minoru Yamashita, Toshio Hattori, Takashi Ozeki, 2013 .

Simple Modeling and Strength Evaluation Methods for Bolt Joints Using Shell Elements and Beam Elements (1st Report, Modelling Method)

Tomohiro Naruse, Takeshi Kawasaki, Toshio Hattori, 2007 .

Self Loosening Behavior of Metal Thread Joints under Transverse Cyclic Loading

Minoru Yamashita, Naoya Nishimura, Toshio Hattori, 2007 .

Mechanics and Failure Examples of Joint structures

Toshio Hattori, 2004 .

803 Numerical Simulation of Incremental Forming of Tailored Blank

Minoru Yamashita, Naoya Nishimura, Kenji Yamada, 2006 .

A method for monitoring fastening force by using a bolt embedded with an optical-fiber sensor

Toshio Hattori, Kohhei Tanaka, 2003 .

504 Standardization of strength evaluation methods using stress distributions

Toshio Hattori, Minoru Yamashita, Naoya Nishimura, 2005 .

Estimation of Back-Off Loosening Limit for Bolted Joints under Transverse Cyclic Loading.

Takeshi Umeki, Toshio Hattori, Masayuki Nakamura, 2001 .

A Stress Singularity Parameter Approach for Evaluating Adhesive Strength

Toshio Hattori, Toshio Hatsuda, Sohji Sakata, 1988 .

A Stress-Singularity-Parameter Approach for Evaluating the Adhesive Strength of Single-Lap Joints

Toshio Hattori, T. Hattori, 1991 .

Fatigue Strength Estimation Method of Wire Protected with Silicone Gel under Vibration Environment

Tomohiro Naruse, Toshio Hattori, Norio Takeda, 2003 .

Self loosening behavior of bolted joints under transverse cyclic loading.

Toshio Hattori, Masayuki Nakamura, T. Hattori, 1998 .

Fretting fatigue strength estimation considering the fretting wear process

Toshio Hattori, T. Hattori, Takashi Watanabe, 2006 .

Fretting fatigue life estimations based on fretting mechanisms

Minoru Yamashita, Toshio Hattori, T. Hattori, 2011 .

A stress singularity parameters approach for evaluating adhesive strength.

Toshio Hattori, Toshio Hatsuda, Sohji Sakata, 1988 .

Patent・Technical Cooperation

Toshio Hattori, 1987 .

Comparison of Five Evaluation Methods of Residual Stress in a Welded Pipe Joint.

Masahito Mochizuki, Toshio Hattori, Makoto Hayashi, 1999 .

Dynamic crush behavior of adhesive-bonded aluminum tubular structure—Experiment and numerical simulation

Minoru Yamashita, Toshio Hattori, Hiromasa Kenmotsu, 2013 .

Quasi-Static and Dynamic Axial Crushing of Various Polygonal Tubes

Minoru Yamashita, Naoya Nishimura, Toshio Hattori, 2007 .

Numerical simulation of sheet metal drawing by Maslennikov's technique

Minoru Yamashita, Toshio Hattori, N. Nishimura, 2007 .

Dynamic Explicit Finite Element Analysis of Roller Leveling of Thick Plate and Shape Defect Caused in Leveling

Minoru Yamashita, Toshio Hattori, 2009 .

Evaluation method for fatigue strength of FRP/metal adhesive joints considering mean stress

Toshio Hattori, Masaaki Iwasa, T. Hattori, 2003 .

Torsional Fatigue Strength of a Shrink Fitted Shaft

Toshio Hattori, Noriaki Okamoto, Sueo Kawai, 1981 .

Fretting fatigue analysis using fracture mechanics.

Toshio Hattori, Masayuki Nakamura, T. Hattori, 1987 .

Numerical Analysis of Welding Residual Stress and Its Verification Using Neutron Diffraction Measurement

Masahito Mochizuki, Toshio Hattori, Hayashi Makoto, 2000 .