Ryozo Tanaka

发表

Heat Transfer Enhancement for Gas Turbine Internal Cooling by Application of Double Swirl Cooling Chambers

Karsten Kusterer, Gang Lin, Dieter Bohn, 2013 .

Nekomimi Film Cooling Holes Configuration Under Conjugate Heat Transfer Conditions

Karsten Kusterer, Dieter Bohn, Takao Sugimoto, 2014 .

Vibration Analysis of Shrouded Turbine Blades for a 30 MW Gas Turbine

Karsten Kusterer, Ryozo Tanaka, Lars Panning-von Scheidt, 2013 .

Development of the Hybrid Gas Turbine: 1st Year Summary — Research and Development on Practical Industrial Cogeneration Technology in Japan

Ryozo Tanaka, Yoshihiro Ichikawa, Testuo Tastumi, 2001 .

Conjugate Calculations for a Film-Cooled Blade Under Different Operating Conditions

Karsten Kusterer, Dieter Bohn, Takao Sugimoto, 2004 .

Conjugate calculation of a film-cooled blade for improvement of the leading edge cooling configuration

Tomoki Taniguchi, Karsten Kusterer, Dieter Bohn, 2013 .

A Parametric Study on the Influence of the Lateral Ejection Angle of Double-Jet Holes on the Film Cooling Effectiveness for High Blowing Ratios

Karsten Kusterer, Dieter Bohn, Takao Sugimoto, 2009 .

Application of an Optical Pyrometer to Newly Developed Industrial Gas Turbine

Tomoki Taniguchi, Karsten Kusterer, Ryozo Tanaka, 2012 .

Improvement of a Film-Cooled Blade by Application of the Conjugate Calculation Technique

Dieter Bohn, Karsten Kusterer, Takao Sugimoto, 2006 .

Experimental and Numerical Investigations of the NEKOMIMI Film Cooling Technology

Karsten Kusterer, Dieter Bohn, Takao Sugimoto, 2012 .

Double-Jet Film-Cooling for Highly Efficient Film-Cooling With Low Blowing Ratios

Karsten Kusterer, Dieter Bohn, Takao Sugimoto, 2008 .

Development of a 20MW-Class High-Efficiency Gas Turbine L20A

Takao Sugimoto, Ryozo Tanaka, Takeshi Kimura, 2002 .

Novel Gas Turbine Blade Leading Edge Cooling Configuration Using Advanced Double Swirl Chambers

Karsten Kusterer, Gang Lin, Dieter Bohn, 2015 .

Influence of Blowing Ratio on the Double-Jet Ejection of Cooling Air

Karsten Kusterer, Dieter Bohn, Takao Sugimoto, 2007 .

A Review of L20A Engine Design and Field Operating Experience

Takao Sugimoto, Ryozo Tanaka, Takeshi Kimura, 2004 .

Development and Commercial Operation Review of Highly Efficient L30A Gas Turbine

Ryozo Tanaka, Ryoji Tamai, Shoichi Sugino, 2013 .

The NEKOMIMI Cooling Technology: Cooling Holes With Ears for High-Efficient Film Cooling

Dieter Bohn, Karsten Kusterer, Takao Sugimoto, 2011 .

The Influence of Rotation on the Internal Flow of a Cooled Turbine Blade With Serpentine-Shaped Cooling Channels

Karsten Kusterer, Takao Sugimoto, Ryozo Tanaka, 1997 .

3-D Internal Flow and Conjugate Calculations of a Convective Cooled Turbine Blade With Serpentine-Shaped and Ribbed Channels

Karsten Kusterer, Dieter Bohn, Takao Sugimoto, 1999 .

Transient Numerical Investigation of Rotor Clocking in 1.5 Stage of an Axial Test Turbine With a Blade-to-Vane Ratio of 1.5

Dieter Bohn, Karsten Kusterer, Takao Sugimoto, 2010 .

Highest-Efficient Film Cooling by Improved NEKOMIMI Film Cooling Holes: Part 2 — Hot Gas Flow Conditions

Karsten Kusterer, Dieter Bohn, Takao Sugimoto, 2013 .

Seismic proof test of a reinforced concrete containment vessel (RCCV): Part 2: Results of shaking table tests

Ryozo Tanaka, Hiroshi Akiyama, Toshio Kobayashi, 2005 .

Reduction of tip clearance losses in an axial turbine by shaped design of the blade tip region

Dieter Bohn, Karsten Kusterer, Takao Sugimoto, 2007 .

Double-Jet Ejection of Cooling Air for Improved Film Cooling

Dieter Bohn, Karsten Kusterer, Takao Sugimoto, 2007 .

Conjugate Heat Transfer Analysis of a Test Configuration for a Film-cooled Blade

Dieter Bohn, Karsten Kusterer, Takao Sugimoto, 2003 .