P. Van Houtte

发表

Generalization of the relaxed constraints models for the prediction of deformation textures

P. Van Houtte, L. Rabet, 1997 .

Analytical method to predict the pull-out strength of clinched connections

Dimitri Debruyne, Hugo Sol, P. Van Houtte, 2012 .

Benchmark tests for 3-D, elasto-plastic, finite-element codes for the modelling of metal forming processes

Peter Hartley, C. E. N. Sturgess, P. Van Houtte, 1992 .

Finite Element Simulation of Residual Stresses in Thermo-coupled Wire Drawing Process

P. Van Houtte, A. Van Bael, Roumen Iankov, 2000, NAA.

Finite-element simulations of cup drawing using the taylor and the lamel model

Anne Habraken, Laurent Duchene, Laurent Delannay, 2004 .

Effect of FEM choices in the modelling of incremental forming of aluminium sheets

Joost Duflou, Christophe Henrard, Anne Habraken, 2005 .

The effect of crystallizing procedure on microstructure and characteristics of sputter-deposited TiNi shape memory thin films

P. Van Houtte, Youming Liu, D Xu, 2005 .

A poly-inclusion approach for the elastic modelling of knitted fabric composites

Ignace Verpoest, P. Van Houtte, P. Houtte, 1998 .

Hierarchical multi-scale modeling of texture induced plastic anisotropy in sheet forming

Giovanni Samaey, Dirk Roose, Philip Eyckens, 2013 .

Biaxial tests on cruciform specimens for the validation of crystallographic yield loci

P. Van Houtte, A. Van Bael, P. Houtte, 1998 .

The design of a biaxial tensile test and its use for the validation of crystallographic yield loci

P. Van Houtte, A. Van Bael, P. Houtte, 2000 .

A disclination-based model for grain subdivision

Bart Peeters, Surya R. Kalidindi, Laurent Delannay, 2001 .

Impact of Ni-silicide grain orientation on the strain and stress fields induced in patterned silicon

Karen Maex, Hugo Bender, Jorge Kittl, 2007 .

Error estimation in measuring strain fields with DIC on planar sheet metal specimens with a non-perpendicular camera alignment

Y. Wang, Dimitri Debruyne, P. Van Houtte, 2011 .

Prediction of residual stresses and springback after bending of a textured aluminium plate

Laurent Delannay, P. Van Houtte, Yvan Chastel, 2002 .

The Introduction of Anisotropic Yield Loci Derived from Texture Measurements in Elasto-Plastic Finite Element Calculations

Peter Hartley, I. Pillinger, P. Van Houtte, 1989 .

Simulation of the rolling textures of b.c.c. metals by means of the relaxed taylor theory

P. Van Houtte, P. Houtte, J. Raphanel, 1985 .

Constitutive relation based on Taylor slip analysis to replicate work-hardening evolution

P. Van Houtte, P. Houtte, Shigeo Saimoto, 2011 .

The significance of friction in the single point incremental forming process

Joost Duflou, Philip Eyckens, P. Van Houtte, 2010 .

Analysis of knitted fabric reinforced composites: Part I. Fibre orientation distribution

Ignace Verpoest, P. Van Houtte, B Gommers, 1998 .

A Comprehensive Mathematical Formulation of an Extended Taylor–Bishop–Hill Model Featuring Relaxed Constraints, the Renouard–WintenbergerTheory and a Strain Rate Sensitivity Model

P. Van Houtte, P. Houtte, P., 1988 .

Application of plastic potentials to strain rate sensitive and insensitive anisotropic materials

P. Van Houtte, P. Houtte, 1994 .

Modelling the initial stage of grain subdivision with the help of a coupled substructure and texture evolution algorithm

Bart Peeters, Laurent Delannay, P. Van Houtte, 2001 .

An FEM-aided investigation of the deformation during single point incremental forming

Joost Duflou, P. Van Houtte, Yasemin Tunckol, 2006 .

Digital image correlation in the classroom: Determining stress concentration factors with webcams

Dimitri Debruyne, P. Van Houtte, Sam Coppieters, 2014, Experimental Techniques.

Analysis of the earing behaviour of aluminium 3004 alloys by means of a single model based on yield loci calculated from orientation distribution functions

P. Van Houtte, Etienne Aernoudt, P. Houtte, 1987 .

Coupled FEM and texture modelling of plane strain extrusion of an aluminium alloy

P. Van Houtte, Trond Aukrust, P. Houtte, 1997 .

Residual stress determination in cold drawn steel wire by FEM simulation and X-ray diffraction

P. Van Houtte, A. Van Bael, S. He, 2003 .

Finite Element Modeling of Incremental Forming of Aluminum Sheets

P. Van Houtte, A. Van Bael, C. Henrard, 2005 .

Identification of the post-necking hardening behaviour of sheet metal by comparison of the internal and external work in the necking zone

Dimitri Debruyne, Hugo Sol, P. Van Houtte, 2011 .

Work-hardening/softening behaviour of B.C.C. polycrystals during changing strain paths: II. TEM observations of dislocation sheets in an if steel during two-stage strain paths and their representation in terms of dislocation densities

Bart Peeters, Cristian Teodosiu, P. Van Houtte, 2001 .

Strain rate effect in high-speed wire drawing process

F Galvez, P. Van Houtte, A. Van Bael, 2002 .

Forming Limit Predictions for the Serrated Strain Paths in Single Point Incremental Sheet Forming

Joost Duflou, Philip Eyckens, P. Van Houtte, 2007 .

On the equivalence of the relaxed Taylor theory and the Bishop-Hill theory for partially constrained plastic deformation of crystals

P. Van Houtte, P. Houtte, 1982 .

Texture development and strength differential effect in textured b.c.c. metals with glide asymmetry

P. Van Houtte, P. Houtte, J. Raphanel, 1989 .

Small-scale Finite Element Modelling of the Plastic Deformation Zone in the Incremental Forming Process

Joost Duflou, Philip Eyckens, Richard Aerens, 2008 .

Quantitative prediction of textures in aluminium cold rolled to moderate strains

Surya R. Kalidindi, Laurent Delannay, P. Van Houtte, 2002 .

Large strain work hardening and textures

P. Van Houtte, J. Gil Sevillano, J. G. Sevillano, 1980 .

Forming Limit Predictions for Single-Point Incremental Sheet Metal Forming

Joost Duflou, Philip Eyckens, Christophe Henrard, 2007 .

The Mori–Tanaka method applied to textile composite materials

Ignace Verpoest, P. Van Houtte, B Gommers, 1998 .

Work-hardening/softening behaviour of b.c.c. polycrystals during changing strain paths: I. An integrated model based on substructure and texture evolution, and its prediction of the stress–strain behaviour of an IF steel during two-stage strain paths

Bart Peeters, Surya R. Kalidindi, Cristian Teodosiu, 2001 .

Application of a Texture‐Based Plastic Potential in Earing Prediction of an IF Steel

P. Van Houtte, A. Van Bael, E Hoferlin, 2001 .

Investigation of the Uncertainty of DIC Under Heterogeneous Strain States with Numerical Tests

Y. Wang, Dimitri Debruyne, P. Van Houtte, 2012 .