G. Koo

发表

Seismic base isolation technologies for Korea advanced liquid metal reactor

Jong-Bum Kim, Jae-Han Lee, H. C. Lee, 2000 .

Elevated Temperature Design of KALIMER Reactor Internals Accounting for Creep and Stress-Rupture Effects

B. Yoo, G. Koo, 2000 .

Study on Inelastic Strain-Based Seismic Fragility Analysis for Nuclear Metal Components

G. Koo, H. Nam, S. Kwag, 2021, Energies.

Enactment of KEPIC MNH Based on 2007 ASME BPVC Section III Division 1, Subsection NH: Class 1 Components in Elevated Temperature Service

G. Koo, Jong-bum Kim, Chang-gyu Park, 2008 .

Investigation of ratcheting characteristics of modified 9Cr–1Mo steel by using the Chaboche constitutive model

Jae-Han Lee, G. Koo, 2007 .

Inelastic constitutive models for the simulation of a cyclic softening behavior of modified 9Cr-lMo steel at elevated temperatures

Jae-Han Lee, Gyeong-Hoi Koo, Jae-Han Lee, 2007 .

Vertical Seismic Isolation Device for Three-Dimensional Seismic Isolation of Nuclear Power Plant Equipment—Case Study

G. Koo, T. Shin, J. Jung, 2021, Applied Sciences.

Shaking Table Tests to Validate Inelastic Seismic Analysis Method Applicable to Nuclear Metal Components

G. Koo, Jong-Sung Kim, J. Hwang, 2021, Applied Sciences.

Round robin analysis to investigate sensitivity of analysis results to finite element elastic-plastic analysis variables for nuclear safety class 1 components under severe seismic load

Yun-Jae Kim, Nam-Su Huh, Gyeong-Hoi Koo, 2021, Nuclear Engineering and Technology.

Inelastic Material Models of Type 316H for Elevated Temperature Design of Advanced High Temperature Reactors

G. Koo, Ji-Hyun Yoon, 2020 .

Identification of inelastic material parameters for modified 9Cr–1Mo steel applicable to the plastic and viscoplastic constitutive equations

G. Koo, JinChil Kwon, 2011 .

Shaking Table Tests of Lead Inserted Small-Sized Laminated Rubber Bearing for Nuclear Component Seismic Isolation

G. Koo, T. Shin, S. Ma, 2021, Applied Sciences.

Development of Small-Sized Lead Inserted Laminated Rubber Bearing for Nuclear Component Seismic Isolation

G. Koo, Jin-Young Jung, Jin-young Park, 2020, Energies.

Enhancement in the Seismic Performance of a Nuclear Piping System using Multiple Tuned Mass Dampers

Jinho Oh, Shinyoung Kwag, Gyeong-Hoi Koo, 2019, Energies.

Seismic modeling and analysis for sodium-cooled fast reactor

Gyeong-Hoi Koo, Suk-Hoon Kim, Jong-Bum Kim, 2012 .

Progressive buckling analysis for a cylindrical shell structure with the free edge subjected to moving thermal cycles

Jae-Han Lee, G. Koo, 2004 .

Feasibility Study on Strain-Based Seismic Design Criteria for Nuclear Components

G. Koo, Yun‐Jae Kim, J. S. Kim, 2020, Energies.

Experimental Approach for the Failure Mode of Small Laminated Rubber Bearings for Seismic Isolation of Nuclear Components

G. Koo, T. Shin, J. Ryu, 2021, Applied Sciences.

Evaluation of laminated rubber bearings for seismic isolation using modified macro-model with parameter equations of instantaneous apparent shear modulus

Yasuki Ohtori, Jae-Han Lee, Bong Yoo, 1999 .

Design of LMR reactor structures in the vicinity of hot pool free surface regions subjected to moving elevated temperature cycles

Jae-Han Lee, Gyeong-Hoi Koo, Jae-Han Lee, 2002 .

Generation of isochronous stress-strain curves with a nonlinear least square fitting method for modified 9Cr-1Mo steel

Gyeong-Hoi Koo, Woo-Gon Kim, Song-Nan Yin, 2009 .

Evaluation of Creep-Fatigue Damage of KALIMER Reactor Internals Using the Elastic Analysis Method in RCC-MR

Bong Yoo, Gyeong-Hoi Koo, B. Yoo, 2001 .

Experimental study on seismic responses of tuned mass damper-applied real-scale piping system via shaking table tests

G. Koo, Jinho Oh, B. Jeon, 2023, Structures.

Improvement on optimal design of dynamic absorber for enhancing seismic performance of nuclear piping using adaptive kriging method

G. Koo, Hwanho Lee, S. Kwag, 2021, Nuclear Engineering and Technology.

Mitigation of seismic responses of actual nuclear piping by a newly developed tuned mass damper device

G. Koo, Jinho Oh, Hwanho Lee, 2021, Nuclear Engineering and Technology.

A Numerical Study on Improvement in Seismic Performance of Nuclear Components by Applying Dynamic Absorber

G. Koo, Jinho Oh, Hwanho Lee, 2019, Journal of the Computational Structural Engineering Institute of Korea.

Investigation of isochronous stress-strain formulations for elevated temperature structural design

Jong-Bum Kim, Gyeong-Hoi Koo, G. Koo, 2012 .

Investigation of isochronous stress-strain formulations for elevated temperature structural design

G. Koo, Jong-bum Kim, 2012, Journal of Mechanical Science and Technology.

Development of an ASME-NH program for nuclear component design at elevated temperatures

Jae-Han Lee, Gyeong-Hoi Koo, Jae-Han Lee, 2008 .

Preliminary structural evaluations of the STAR-LM reactor vessel and the support design

James J. Sienicki, Gyeong-Hoi Koo, Anton Moisseytsev, 2007 .

Development of FAMD code to calculate the fluid added mass and damping of arbitrary structures submerged in confined

Jae-Han Lee, Jae-Han Lee, G. Koo, 2003 .