J. Remacle

发表

Anisotropic adaptive simulation of transient flows using discontinuous Galerkin methods

J. Remacle, Xiangrong Li, M. Shephard, 2005 .

Gmsh: A 3‐D finite element mesh generator with built‐in pre‐ and post‐processing facilities

J. Remacle, C. Geuzaine, 2009 .

Gmsh: A 3‐D finite element mesh generator with built‐in pre‐ and post‐processing facilities

Christophe Geuzaine, Jean-François Remacle, J. Remacle, 2009 .

Efficient visualization of high‐order finite elements

J. Remacle, C. Geuzaine, N. Chevaugeon, 2007 .

A mesh adaptation framework for dealing with large deforming meshes

J. Remacle, G. Compère, J. Jansson, 2010 .

Error estimation based on a new principle of projection and reconstruction

J. Remacle, C. Geuzaine, P. Dular, 1998 .

Representing three-dimensional cross fields using 4th order tensors

Jean-François Remacle, François Henrotte, Jean Van Schaftingen, 2018, IMR.

Practical evaluation of five partly discontinuous finite element pairs for the non‐conservative shallow water equations

Jean-François Remacle, Jonathan Lambrechts, Vincent Legat, 2009 .

Shock detection and limiting with discontinuous Galerkin methods for hyperbolic conservation laws

J. Remacle, J. Flaherty, N. Chevaugeon, 2004 .

A computational approach to handle complex microstructure geometries

Jean-François Remacle, Nicolas Moës, Patrice Cartraud, 2003 .

One machine, one minute, three billion tetrahedra

J. Remacle, J. Pellerin, C. Marot, 2018, International Journal for Numerical Methods in Engineering.

Taking up the challenges of multi-scale marine modelling

J. Remacle, T. Fichefet, E. Hanert, 2010 .

The Influence of Geometric Approximation on the Accuracy of High Order Methods

J. Remacle, M. Shephard, Xiaojuan Luo, 2002 .

Substructuring FE-XFE approaches applied to three-dimensional crack propagation

Jean-François Remacle, Marc Duflot, Thomas Pardoen, 2008 .

Simulation-based femoro-popliteal bypass surgery

J. Remacle, E. Marchandise, G. Compère, 2008 .

Imposing Dirichlet boundary conditions in the eXtended Finite Element Method

Jean-François Remacle, Marc Duflot, Gaëtan Bricteux, 2011 .

Hierarchic multigrid iteration strategy for the discontinuous Galerkin solution of the steady Euler equations

Jean-François Remacle, Koen Hillewaert, Nicolas Chevaugeon, 2006 .

A fully consistent and conservative vertically adaptive coordinate system for SLIM 3D v0.4 with an application to the thermocline oscillations of Lake Tanganyika

J. Remacle, W. Thiery, V. Legat, 2018 .

A fully consistent and conservative vertically adaptive coordinate system for SLIM 3D v0.4, a DG finite element hydrodynamic model, with an application to the thermocline oscillations of Lake Tanganyika

J. Remacle, W. Thiery, V. Legat, 2017 .

Discontinuous Galerkin finite element discretization of a strongly anisotropic diffusion operator

J. Remacle, T. Fichefet, J. Lambrechts, 2014 .

Hex-dominant Meshing Approach based on Frame Field Smoothness

J. Remacle, C. Geuzaine, P. Bernard, 2014 .

Fifth International Conference on Advanced COmputational Methods in ENgineering (ACOMEN 2011)

Christophe Geuzaine, Erik Dick, Jean-François Remacle, 2013 .

Computing two dimensional cross fields - A PDE approach based on the Ginzburg-Landau theory pdf

Christophe Geuzaine, Jean-François Remacle, Jonathan Lambrechts, 2017, ArXiv.

Meshing Roundtable , IMR 26 , 18-21 September 2017 , Barcelona , Spain Elliptic Fekete points obtained by Ginzburg-Landau PDE

J. Remacle, A. Chemin, Pierre-Alexandre Beaufort, 2017 .

A computational approach to deal with complex microstructure geometries

J. Remacle, N. Moës, Mathieu Cloirec, 2003 .

Influence of the turbulence closure scheme on the finite-element simulation of the upwelling in the wake of a shallow-water island

J. Remacle, S. Blaise, É. Deleersnijder, 2007 .

Indirect all-quadrilateral meshing based on bipartite topological labeling

J. Remacle, M. Reberol, Christos Georgiadis, 2022, Engineering with Computers.

Hex-Mesh Generation and Processing: A Survey

J. Remacle, Xifeng Gao, D. Bommes, 2022, ACM Trans. Graph..

from the proposal for a 5 year Action de recherche concertées programme devoted to the development of a Second generation model of the ocean system ( research due to start in September 2004 )

J. Remacle, T. Fichefet, V. Legat, 2004 .

Finite element modeling of periodic polycrystalline aggregates with intergranular cracks

J. Remacle, P. Yan, L. Delannay, 2016 .

GMSH’S APPROACH TO ROBUST MESH GENERATION OF SURFACES WITH IRREGULAR PARAMETRIZATIONS

J. Remacle, C. Geuzaine, 2019 .

THE GENERATION OF UNIT P 2 MESHES: ERROR ESTIMATION AND MESH ADAPTATION

J. Remacle, F. Henrotte, Ruili Zhang, 2021 .

Robust topological construction of all-hexahedral boundary layer meshes

J. Remacle, D. Bommes, F. Henrotte, 2022, ACM Transactions on Mathematical Software.

Anisotropic mesh adaptation with optimal convergence for finite elements using embedded geometries

Jean-François Remacle, Emilie Marchandise, Thomas Toulorge, 2014 .

Optimal parametrizations for surface remeshing

Christophe Geuzaine, Jean-François Remacle, Emilie Marchandise, 2014, Engineering with Computers.

Quality Surface Meshing Using Discrete Parametrizations

Christophe Geuzaine, Jean-François Remacle, Emilie Marchandise, 2011, IMR.

Multiscale mesh generation on the sphere

Jean-François Remacle, Christophe Geuzaine, Jonathan Lambrechts, 2008 .

Anisotropic Mesh Gradation Control

Jean-François Remacle, Mark S. Shephard, Nicolas Chevaugeon, 2004, IMR.

Geometrical validity of high-order triangular finite elements

Christophe Geuzaine, Amaury Johnen, Jean-François Remacle, 2014, Engineering with Computers.

Geometrical validity of curvilinear finite elements

Christophe Geuzaine, Amaury Johnen, Jean-François Remacle, 2011, J. Comput. Phys..

A Course on Hex-Mesh Generation and Processing

J. Remacle, Xifeng Gao, D. Bommes, 2022, ACM SIGGRAPH Asia 2022 Courses.

Robust untangling of curvilinear meshes

Christophe Geuzaine, Jean-François Remacle, Thomas Toulorge, 2013, J. Comput. Phys..

Automatic surface mesh generation for discrete models: A complete and automatic pipeline based on reparameterization

J. Remacle, C. Geuzaine, Pierre-Alexandre Beaufort, 2020, J. Comput. Phys..

MULTI-BLOCK DECOMPOSITION AND MESHING OF 2D DOMAIN USING GINZBURG-LANDAU PDE

J. Remacle, A. Chemin, J. Jezdimirovic, 2019 .

Integrable cross-field generation based on imposed singularity configuration - the 2D manifold case -

J. Remacle, A. Chemin, Jovana Jezdimirovi'c, 2022, ArXiv.

Quasi-structured quadrilateral meshing in Gmsh - a robust pipeline for complex CAD models

J. Remacle, M. Reberol, Christos Georgiadis, 2021, ArXiv.

Quad layouts with high valence singularities for flexible quad meshing

J. Remacle, F. Henrotte, A. Chemin, 2021, ArXiv.

Ginzburg-Landau energy and placement of singularities in generated cross fields pdf

Jean-François Remacle, Maxence Reberol, François Henrotte, 2020, ArXiv.

Multiple Approaches to Frame Field Correction for CAD Models pdf

Maxence Reberol, Alexandre Chemin, Jean-Francois Remacle, 2019, ArXiv.

Computing cross fields - A PDE approach based on the Ginzburg-Landau theory

Christophe Geuzaine, Jean-Franccois Remacle, Pierre-Alexandre Beaufort, 2017, 1706.01344.

Numerical simulation of CAD thin structures using the eXtended Finite Element Method and Level Sets

Christophe Geuzaine, Jean-François Remacle, Grégory Legrain, 2013 .

Strychnine-induced passive avoidance facilitation after electroconvulsive shock or undertraining: a retrieval effect.

J. Remacle, S. Sara, 1977, Behavioral biology.

A multi-scale model of the hydrodynamics of the whole Great Barrier Reef

Jean-François Remacle, Eric Deleersnijder, Jonathan Lambrechts, 2008 .

Influence of grain shape on the planar anisotropy of rolled steel sheets ― evaluation of three models

J. Remacle, T. Kuwabara, J. Signorelli, 2009 .

Aspects of discontinuous Galerkin methods for hyperbolic conservation laws

Jean-François Remacle, Joseph E. Flaherty, Mark S. Shephard, 2002 .

One machine, one minute, three billion tetrahedra pdf

Jeanne Pellerin, Jean-François Remacle, Célestin Marot, 2018, International Journal for Numerical Methods in Engineering.

Transient adaptivity applied to two-phase incompressible flows

Jean-François Remacle, Emilie Marchandise, Gaëtan Compère, 2008, J. Comput. Phys..

Optimizing the geometrical accuracy of curvilinear meshes

Jean-François Remacle, Jonathan Lambrechts, Thomas Toulorge, 2015, J. Comput. Phys..

Surface reparametrization using quadratic finite elements

J. Remacle, Pierre-Alexandre Beaufort, 2016 .

p-Version Mesh Generation Issues

Robert M. O'Bara, Jean-François Remacle, Mark S. Shephard, 2002, IMR.

High-order discontinuous Galerkin schemes on general 2D manifolds applied to the shallow water equations

Jean-François Remacle, Koen Hillewaert, Vincent Legat, 2009, J. Comput. Phys..

Identifying combinations of tetrahedra into hexahedra: A vertex based strategy

Jeanne Pellerin, Amaury Johnen, Jean-François Remacle, 2017, Comput. Aided Des..

A quadrature-free discontinuous Galerkin method for the level set equation

Jean-François Remacle, Emilie Marchandise, Nicolas Chevaugeon, 2006, J. Comput. Phys..

An adaptive discretization of shallow‐water equations based on discontinuous Galerkin methods

Jean-François Remacle, Sandra Soares Frazao, Mark S. Shephard, 2006 .

A multiscale approach for the simulation of cracks

Jean-François Remacle, Thomas Pardoen, Philippe Martiny, 2005 .

An efficient parallel implementation of explicit multirate Runge-Kutta schemes for discontinuous Galerkin computations

Jean-François Remacle, Jonathan Lambrechts, Thomas Toulorge, 2014, J. Comput. Phys..

Adaptive Mesh Generation and Visualisation

Jean-François Remacle, Christophe Geuzaine, J. Compère, 2010 .

The Generation of Valid Curvilinear Meshes

Amaury Johnen, Jean-François Remacle, Christophe Geuzaine, 2015 .

Adaptive mesh generation for curved domains

Robert M. O'Bara, Jean-François Remacle, Joseph E. Flaherty, 2005 .

A discontinuous finite element baroclinic marine model on unstructured prismatic meshes

Jean-François Remacle, Eric Deleersnijder, Jonathan Lambrechts, 2010 .

A discontinuous finite element baroclinic marine model on unstructured prismatic meshes

Jean-François Remacle, Eric Deleersnijder, Jonathan Lambrechts, 2010 .

Simplified methods and a posteriori error estimation for the homogenization of representative volume elements (RVE)

J. Tinsley Oden, Jean-François Remacle, Nicolas Moës, 1999 .

A stabilized finite element method using a discontinuous level set approach for solving two phase incompressible flows

Jean-François Remacle, Emilie Marchandise, J. Remacle, 2006, J. Comput. Phys..

CAD and mesh repair with Radial Basis Functions

Jean-François Remacle, Emilie Marchandise, Cécile Piret, 2012, J. Comput. Phys..

GPU-accelerated discontinuous Galerkin methods on hybrid meshes

Axel Modave, Jesse Chan, Zheng Wang, 2015, J. Comput. Phys..

A frontal Delaunay quad mesh generator using the L ∞ norm

Christophe Geuzaine, Jean-François Remacle, Emilie Marchandise, 2013, IMR.

A high-resolution model of the Hydrodynamics of the whole Great Barrier Reef

J. Remacle, E. Hanert, E. Wolanski, 2007 .

Submesoscale tidal eddies in the wake of coral islands and reefs: satellite data and numerical modelling

J. Remacle, G. Marmorino, E. Wolanski, 2017, Ocean Dynamics.

Quality Measures for Curvilinear Finite Elements

J.-F. Remacle, C. Geuzaine, A. Johnen, 2021, Notes on Numerical Fluid Mechanics and Multidisciplinary Design.

Efficient computation of the minimum of shape quality measures on curvilinear finite elements

Christophe Geuzaine, Amaury Johnen, Jean-François Remacle, 2018, Comput. Aided Des..

Computational Fluid Dynamics Application to Gun Muzzle Blast - A Validation Case Study

Jean-François Remacle, Joseph E. Flaherty, Mark S. Shephard, 2003 .

An Adaptive Discontinuous Galerkin Technique with an Orthogonal Basis Applied to Compressible Flow Problems

Jean-François Remacle, Joseph E. Flaherty, Mark S. Shephard, 2003, SIAM Rev..

Fast and robust mesh generation on the sphere Application to coastal domains

Jean-François Remacle, Jonathan Lambrechts, J. Remacle, 2016, Comput. Aided Des..

Multirate time stepping for accelerating explicit discontinuous Galerkin computations with application to geophysical flows

Jean-François Remacle, Jonathan Lambrechts, Bruno Seny, 2013 .

Boundary discretization for high‐order discontinuous Galerkin computations of tidal flows around shallow water islands

Jean-François Remacle, Vincent Legat, Paul-Emile Bernard, 2009 .

Fast and Robust Mesh Generation on the Sphere – Application to Coastal Domains

J. Remacle, J. Lambrechts, 2016 .

High-order h-adaptive discontinuous Galerkin methods for ocean modelling

Jean-François Remacle, Eric Deleersnijder, Nicolas Chevaugeon, 2007 .

A 3D strongly coupled implicit discontinuous Galerkin level set-based method for modeling two-phase flows

Jean-François Remacle, Koen Hillewaert, Emilie Marchandise, 2013 .

A substructured FE‐shell/XFE‐3D method for crack analysis in thin‐walled structures

Jean-François Remacle, Marc Duflot, Thomas Pardoen, 2007 .

Application of the substructured finite element/extended finite element method (S-FE/XFE) to the analysis of cracks in aircraft thin walled structures

Jean-François Remacle, Thomas Pardoen, Frédéric Lani, 2009 .

Optimal numerical parameterization of discontinuous Galerkin method applied to wave propagation problems

Jean-François Remacle, Koen Hillewaert, Nicolas Chevaugeon, 2007, J. Comput. Phys..

A substructured FE/XFE method for stress intensity factors computation in an industrial structure

Jean-François Remacle, Thomas Pardoen, Philippe Martiny, 2007 .

Capturing the bottom boundary layer in finite element ocean models

Jean-François Remacle, Eric Deleersnijder, Emmanuel Hanert, 2007 .

Discontinuous fields integration in a structured mesh using the level set method

Jean-François Remacle, Marc Duflot, Gaëtan Bricteux, 2008 .

An algorithm oriented mesh database

Jean-François Remacle, Mark S. Shephard, Kaan Karamete, 2003, IMR.

Parallel Algorithm Oriented Mesh Database

Jean-François Remacle, Joseph E. Flaherty, Mark S. Shephard, 2002, Engineering with Computers.

Quality open source mesh generation for cardiovascular flow simulations

Paolo Crosetto, Jean-François Remacle, Christophe Geuzaine, 2012 .

A stabilized finite element method using a discontinuous level set approach for the computation of bubble dynamics

Jean-François Remacle, Emilie Marchandise, Nicolas Chevaugeon, 2007, J. Comput. Phys..

Dispersion Analysis of Discontinuous Galerkin Schemes Applied to Poincaré, Kelvin and Rossby Waves

Jean-François Remacle, Eric Deleersnijder, Vincent Legat, 2008, J. Sci. Comput..

Crystal‐Plasticity‐Based FE Modelling Of A Dual‐Phase Microstructure In Which Grains Have Non‐Uniform Shape And Size

J. Remacle, L. Delannay, M. Melchior, 2007 .

High-order h-adaptive discontinuous Galerkin methods for ocean modelling

Jean-François Remacle, Eric Deleersnijder, Nicolas Chevaugeon, 2007 .

Magnetostatic and magnetodynamic mixed formulations compared with conventional formulations

J. Remacle, P. Dular, W. Legros, 1997 .

Multidirectionnal sweeping preconditioners with non-overlapping checkerboard domain decomposition for Helmholtz problems pdf

Axel Modave, Christophe Geuzaine, Ruiyang Dai, 2021, J. Comput. Phys..

Transient adaptive discontinuous Galerkin method with anisotropic meshes

J. Remacle, 2003 .

Transient Mesh Adaptation Using Conforming and Non Conforming Mesh Modifications

Jean-François Remacle, Mark S. Shephard, Nicolas Chevaugeon, 2002, IMR.

A frontal approach to hex-dominant mesh generation

Christophe Geuzaine, Jean-François Remacle, Emilie Marchandise, 2014, Adv. Model. Simul. Eng. Sci..

Blossom‐Quad: A non‐uniform quadrilateral mesh generator using a minimum‐cost perfect‐matching algorithm

J. Remacle, C. Geuzaine, E. Marchandise, 2012 .

A mesh adaptation framework for dealing with large deforming meshes

J. Remacle, G. Compère, J. Jansson, 2010 .

There are 174 subdivisions of the hexahedron into tetrahedra

Jeanne Pellerin, Jean-François Remacle, Kilian Verhetsel, 2018, ACM Trans. Graph..

Quality meshing based on STL triangulations for biomedical simulations

Christophe Geuzaine, Jean-François Remacle, Emilie Marchandise, 2010 .

High‐quality surface remeshing using harmonic maps

Christophe Geuzaine, Jean-François Remacle, Emilie Marchandise, 2010 .

Finding hexahedrizations for small quadrangulations of the sphere

Jeanne Pellerin, Jean-François Remacle, Kilian Verhetsel, 2019, ACM Trans. Graph..

A 44-Element Mesh of Schneiders' Pyramid

Jeanne Pellerin, Jean-François Remacle, Kilian Verhetsel, 2018, IMR.

X-Mesh: A new approach for the simulation of two-phase flow with sharp interface

J. Remacle, J. Lambrechts, N. Moës, 2023, Journal of Computational Physics.

The eXtreme Mesh deformation approach (X-MESH) for the Stefan phase change model

J. Remacle, N. Chevaugeon, J. Lambrechts, 2021, J. Comput. Phys..

Metric field construction for anisotropic mesh adaptation with application to blood flow simulations

E Marchandise, J. Remacle, E. Marchandise, 2014, International journal for numerical methods in biomedical engineering.

Multi-threaded mesh generation

Jean-François Remacle, Célestin Marot, J. Remacle, 2017 .

A two-level multithreaded Delaunay kernel

Jean-François Remacle, J. Remacle, 2017, Comput. Aided Des..