M. Hull

发表

The effect of pedaling rate on coordination in cycling.

R. Neptune, S. Kautz, M. Hull, 1997, Journal of biomechanics.

A theoretical analysis of preferred pedaling rate selection in endurance cycling.

R. Neptune, M. Hull, 1999, Journal of biomechanics.

How the stiffness of meniscal attachments and meniscal material properties affect tibio-femoral contact pressure computed using a validated finite element model of the human knee joint.

M. Hull, T. H. Haut Donahue, M. Rashid, 2003, Journal of biomechanics.

A new technique for transmission of signals from implantable transducers

M. Hull, D. Lindsey, E. McKee, 1998, IEEE Transactions on Biomedical Engineering.

Validation of a new method for finding the rotational axes of the knee using both marker-based roentgen stereophotogrammetric analysis and 3D video-based motion analysis for kinematic measurements.

M. Hull, S. Howell, M. Roland, 2011, Journal of biomechanical engineering.

A finite element model of the human knee joint for the study of tibio-femoral contact.

M. Hull, M. Rashid, C. Jacobs, 2002, Journal of biomechanical engineering.

MEASUREMENT OF RIDER INDUCED LOADS DURING SIMULATED BICYCLING

Farhad Bolourchi, M. L. Hull, M. Hull, 1985 .

A method for determining lower extremity muscle-tendon lengths during flexion/extension movements.

M. Hull, D. Hawkins, David Hawkins, 1990, Journal of biomechanics.

Non-driving intersegmental knee moments in cycling computed using a model that includes three-dimensional kinematics of the shank/foot and the effect of simplifying assumptions.

M. Hull, C. Gregersen, 2003, Journal of biomechanics.

Physiological response to cycling with both circular and noncircular chainrings.

K. Williams, S. Kautz, M. Hull, 1992, Medicine and science in sports and exercise.

Design, calibration and validation of a novel 3D printed instrumented spatial linkage that measures changes in the rotational axes of the tibiofemoral joint.

Daniel P. Bonny, M. Hull, S. Howell, 2014, Journal of biomechanical engineering.

Changes in the rotational axes of the tibiofemoral joint caused by resection of the anterior cruciate ligament

Daniel P. Bonny, M. Hull, S. Howell, 2017, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Methods for Fatigue Testing Off-Road Bicycle Handlebars Based on Assembly Effects Using Two Different Stem Designs

Maury L. Hull, Re Link, Re Petersen, 2003 .

Analysis of EMG measurements during bicycle pedalling.

M L Hull, M. Hull, M. Jorge, 1986, Journal of biomechanics.

Bivariate optimization of pedalling rate and crank arm length in cycling.

M L Hull, M. Hull, H. Gonzalez, 1988, Journal of biomechanics.

How Three Methods for Fixing a Medial Meniscal Autograft Affect Tibial Contact Mechanics

M. Hull, S. Howell, M. M. Alhalki, 1999, The American journal of sports medicine.

Contact Mechanics of the Medial Tibial Plateau after Implantation of a Medial Meniscal Allograft

M. Hull, S. Howell, M. M. Alhalki, 2000, The American journal of sports medicine.

Structural Properties of Six Tibial Fixation Methods for Anterior Cruciate Ligament Soft Tissue Grafts

M. Hull, S. Howell, H. Magen, 1999, The American journal of sports medicine.

Does A Kinematically Aligned Total Knee Arthroplasty Restore Function Without Failure Regardless of Alignment Category?

M. Hull, S. Howell, S. Howell, 2013, Clinical orthopaedics and related research.

Quasi-steady-state displacement response of whole human cadaveric knees in a MRI scanner.

M. Hull, C. Neu, K. J. Martin, 2009, Journal of biomechanical engineering.

Strain in the medial collateral ligament of the human knee under single and combined loads.

M L Hull, H A Patterson, M. Hull, 1996, Journal of biomechanics.

The influence of pedaling rate on bilateral asymmetry in cycling.

M L Hull, R R Neptune, R. Neptune, 1999, Journal of biomechanics.

The effect of knee model on estimates of muscle and joint forces in recumbent pedaling.

M L Hull, Michael J Koehle, M. Hull, 2010, Journal of biomechanical engineering.

Influence of Pedaling Rate on Muscle Mechanical Energy in Low Power Recumbent Pedaling Using Forward Dynamic Simulations

M. Hull, N. Hakansson, Maury L. Hull, 2007, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

An insert with less than spherical medial conformity causes a loss of passive internal rotation after calipered kinematically aligned TKA

M. Hull, S. Howell, A. Nedopil, 2021, Archives of Orthopaedic and Trauma Surgery.

Adjusting Insert Thickness and Tibial Slope Do Not Correct Internal Tibial Rotation Loss Caused by PCL Resection: In Vitro Study of a Medial Constraint TKA Implanted with Unrestricted Calipered Kinematic Alignment

M. Hull, S. Howell, T. Mccoy, 2021, The Journal of Knee Surgery.

More passive internal tibial rotation with posterior cruciate ligament retention than with excision in a medial pivot TKA implanted with unrestricted caliper verified kinematic alignment

M. Hull, S. Howell, A. Nedopil, 2021, Knee Surgery, Sports Traumatology, Arthroscopy.

Restoring the Patient’s Pre-Arthritic Posterior Slope Is the Correct Target for Maximizing Internal Tibial Rotation When Implanting a PCL Retaining TKA with Calipered Kinematic Alignment

M. Hull, S. Howell, C. Delman, 2021, Journal of personalized medicine.

Strain inhomogeneity in the anterior cruciate ligament under application of external and muscular loads.

M. Hull, J. Bach, 1998, Journal of biomechanical engineering.

A musculoskeletal model of the equine forelimb for determining surface stresses and strains in the humerus--part I. Mathematical modeling.

M. Hull, S. Stover, L. Galuppo, 2008, Journal of biomechanical engineering.

Comparison of viscoelastic, structural, and material properties of double-looped anterior cruciate ligament grafts made from bovine digital extensor and human hamstring tendons.

M. Hull, S. Howell, T. Donahue, 2001, Journal of biomechanical engineering.

Checkpoints for judging tunnel and anterior cruciate ligament graft placement.

M. Hull, S. Howell, 2009, The journal of knee surgery.

Repeatability, reproducibility, and agreement of three computational methods to approximate the functional flexion-extension axis of the tibiofemoral joint using 3D bone models of the femur

M. Hull, S. Howell, Rocio Lozano, 2019, Computer methods in biomechanics and biomedical engineering.

Measurement of pedal loading in bicycling: II. Analysis and results.

M L Hull, R R Davis, M. Hull, 1981, Journal of Biomechanics.

Geometric symmetry of the solar surface of hooves of thoroughbred racehorses.

M. Hull, S. Stover, E. Roland, 2003, American journal of veterinary research.

How changing the inversion/eversion foot angle affects the nondriving intersegmental knee moments and the relative activation of the vastii muscles in cycling.

M. Hull, C. Gregersen, N. Hakansson, 2006, Journal of biomechanical engineering.

Management of a Patient with an Anterior Cruciate Ligament Rupture

M. Hull, S. Howell, C. Smith, 2009 .

BIOMECHANICS OF CYCLING MULTIVARIABLE OPTIMIZATION OF CYCLING BIOMECHANICS

M. Hull, H. Gonzalez, 2008 .

Does Kinematic Alignment and Flexion of a Femoral Component Designed for Mechanical Alignment Reduce the Proximal and Lateral Reach of the Trochlea?

M. Hull, S. Howell, M. Mahfouz, 2016, The Journal of arthroplasty.

What clinical characteristics and radiographic parameters are associated with patellofemoral instability after kinematically aligned total knee arthroplasty?

M. Hull, S. Howell, A. Nedopil, 2017, International Orthopaedics.

Does Mechanical or Kinematic Alignment in Total Knee Arthroplasty Cause Collateral Ligament Instability and Change Limb and Knee Alignment from Normal ?

M. Hull, S. Howell, J. Roth, 2014 .

How Frequently Do Four Methods for Mechanically Aligning a Total Knee Arthroplasty Cause Collateral Ligament Imbalance and Change Alignment from Normal in White Patients? AAOS Exhibit Selection.

M. Hull, S. Howell, J. Roth, 2014, The Journal of bone and joint surgery. American volume.

In vivo adduction and reverse axial rotation (external) of the tibial component can be minimized.

M. Hull, S. Howell, Kyle T. Kuznik, 2009, Orthopedics.

The level of compressive load affects conclusions from statistical analyses to determine whether a lateral meniscal autograft restores tibial contact pressure to normal: A study in human cadaveric knees

M. Hull, S. Howell, Arthur Huang, 2003, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

The limits of passive motion are variable between and unrelated within normal tibiofemoral joints

M. Hull, S. Howell, J. Roth, 2015, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Roentgen stereophotogrammetric analysis methods for determining ten causes of lengthening of a soft-tissue anterior cruciate ligament graft construct.

M. Hull, S. Howell, C. Smith, 2008, Journal of biomechanical engineering.

Can markers injected into a single-loop anterior cruciate ligament graft define the axes of the tibial and femoral tunnels? A cadaveric study using roentgen stereophotogrammetric analysis.

M. Hull, S. Howell, C. Smith, 2008, Journal of biomechanical engineering.

Repeatability, reproducibility, and agreement of three methods for finding the mechanical axis of the human tibia

M. Hull, Alexander Simileysky, 2022, Computer methods in biomechanics and biomedical engineering.

Which Asymmetric Tibial Component Is Optimally Designed for Calipered Kinematically Aligned Total Knee Arthroplasty?

M. Hull, S. Howell, C. Delman, 2021, The Journal of Knee Surgery.

Kinematically aligned TKA restores physiological patellofemoral biomechanics in the sagittal plane during a deep knee bend

M. Hull, S. Howell, T. Shelton, 2019, Knee Surgery, Sports Traumatology, Arthroscopy.

Kinematic alignment more closely restores the groove location and the sulcus angle of the native trochlea than mechanical alignment: implications for prosthetic design

M. Hull, S. Howell, V. Campanelli, 2018, Knee Surgery, Sports Traumatology, Arthroscopy.

Predicting non-isometric fatigue induced by electrical stimulation pulse trains as a function of pulse duration

M. Hull, A. Wexler, M. Marion, 2013, Journal of NeuroEngineering and Rehabilitation.

High-Stiffness Distal Fixation Restores Anterior Laxity and Stiffness as Well as Joint Line Fixation with an Interference Screw

M. Hull, S. Howell, David Liu-Barba, 2007, The American journal of sports medicine.

Contributions of femoral fixation methods to the stiffness of anterior cruciate ligament replacements at implantation.

M. Hull, S. Howell, J. T. To, 1999, Arthroscopy : the journal of arthroscopic & related surgery : official publication of the Arthroscopy Association of North America and the International Arthroscopy Association.

In vivo tensile behavior of a four‐bundle hamstring graft as a replacement for the anterior cruciate ligament

M. Hull, S. Howell, M. P. Wallace, 1997, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Early tension loss in an anterior cruciate ligament graft. A cadaver study of four tibial fixation devices.

M. Hull, S. Howell, Dustin M Grover, 2005, The Journal of bone and joint surgery. American volume.

Evaluation of the Single-Incision Arthroscopic Technique for Anterior Cruciate Ligament Replacement

M. Hull, S. Howell, M. P. Wallace, 1999, The American journal of sports medicine.

Tibial forces are more useful than varus‐valgus laxities for identifying and correcting overstuffing in kinematically aligned total knee arthroplasty

M. Hull, S. Howell, J. Roth, 2020, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Internal–external malalignment of the femoral component in kinematically aligned total knee arthroplasty increases tibial force imbalance but does not change laxities of the tibiofemoral joint

M. Hull, S. Howell, J. Roth, 2018, Knee Surgery, Sports Traumatology, Arthroscopy.

Coupled motions under compressive load in intact and ACL-deficient knees: a cadaveric study.

M. Hull, S. Howell, David Liu-Barba, 2007, Journal of biomechanical engineering.

An in vitro osteotomy method to expose the medial compartment of the human knee.

M. Hull, S. Howell, T. Martens, 1997, Journal of biomechanical engineering.

A method for designing multiload component dynamometers incorporating octagonal strain rings

M. Hull, M. Kroencke, 1989 .

Errors in using fixed flexion facet centers to determine tibiofemoral kinematics increase fourfold for multi-radius femoral component designs with early versus late decreases in the radius of curvature.

M. Hull, 2022, The Knee.

Kinematically Aligned Total Knee Arthroplasty Using Calipered Measurements, Manual Instruments, and Verification Checks

M. Hull, S. Howell, A. Nedopil, 2020, Personalized Hip and Knee Joint Replacement.

Does alignment of the limb and tibial width determine relative narrowing between compartments when planning mechanically aligned TKA?

M. Hull, S. Howell, A. Nedopil, 2017, Archives of Orthopaedic and Trauma Surgery.

Principle , History , Surgical Technique , and Results of Kinematic Alignment : An Alignment Option for Total Knee Arthroplasty

M. Hull, S. Howell, H. Dossett, 2014 .

Kinematic Alignment in Total Knee Arthroplasty

M. Hull, S. Howell, 2012 .

How Frequently Do Five Total Arthroplasty Methods Change the Alignment of the Joint Lines and Limb From Normal

M. Hull, S. Howell, J. Roth, 2012 .

Variability of the location of the tibial tubercle affects the rotational alignment of the tibial component in kinematically aligned total knee arthroplasty

M. Hull, S. Howell, Justin Chen, 2013, Knee Surgery, Sports Traumatology, Arthroscopy.

Toward an MRI-based method to measure non-uniform cartilage deformation: an MRI-cyclic loading apparatus system and steady-state cyclic displacement of articular cartilage under compressive loading.

M. Hull, C. Neu, 2003, Journal of biomechanical engineering.

BIOMECHANICAL AND PHYSIOLOGICAL ASPECTS OF CYCLING BEHAVIOR 3

R. Gregor, J. Broker, M. Hull, 1996 .

Telemetry system for monitoring anterior cruciate ligament graft forcesin vivo

M. Hull, D. Lindsey, E. McKee, 1998, Medical and Biological Engineering and Computing.

Nonanatomic Location of the Posterior Horn of a Medial Meniscal Autograft Implanted in a Cadaveric Knee Adversely Affects the Pressure Distribution on the Tibial Plateau

M. Hull, S. Howell, S. Sekaran, 2002, The American journal of sports medicine.

Femoral bone and cartilage wear is predictable at 0° and 90° in the osteoarthritic knee treated with total knee arthroplasty

Maury L. Hull, Stephen M. Howell, Denis Nam, 2014, Knee Surgery, Sports Traumatology, Arthroscopy.

Compaction of a Bone Dowel in the Tibial Tunnel Improves the Fixation Stiffness of a Soft Tissue Anterior Cruciate Ligament Graft

Stephen M Howell, Maury L Hull, M. Hull, 2005, The American journal of sports medicine.

Is the circumferential tensile modulus within a human medial meniscus affected by the test sample location and cross‐sectional area?

M L Hull, S M Howell, M. Hull, 2000, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Compressive moduli of the human medial meniscus in the axial and radial directions at equilibrium and at a physiological strain rate

M. Hull, H. Chia, 2008, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Strain in the anteromedial bundle of the anterior cruciate ligament under combination loading

M L Hull, H A Patterson, G. Berns, 1992, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

A musculoskeletal model of the equine forelimb for determining surface stresses and strains in the humerus-part II. Experimental testing and model validation.

M. Hull, S. Stover, L. Galuppo, 2008, Journal of biomechanical engineering.

Lengthening of double‐looped tendon graft constructs in three regions after cyclic loading: A study using Roentgen stereophotogrammetric analysis

M. Hull, S. Howell, P. Roos, 2004, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Anterior Laxity, Slippage, and Recovery of Function in the First Year After Tibialis Allograft Anterior Cruciate Ligament Reconstruction

Maury L. Hull, Stephen M. Howell, M. Hull, 2011, The American journal of sports medicine.

Does graft construct lengthening at the fixations cause an increase in anterior laxity following anterior cruciate ligament reconstruction in vivo?

M L Hull, S M Howell, M. Hull, 2010, Journal of biomechanical engineering.

Cruciate Ligament Reconstruction Anterior Laxity , Slippage , and Recovery of Function in the First Year After Tibialis Allograft Anterior

M. Hull, S. Howell, C. Smith, 2010 .

How Four Weeks of Implantation Affect the Strength and Stiffness of a Tendon Graft in a Bone Tunnel

M. Hull, S. Howell, Keith W. Lawhorn, 2002, The American journal of sports medicine.

Empirical relationship between lengthening an anterior cruciate ligament graft and increases in knee anterior laxity: a human cadaveric study.

M L Hull, S M Howell, M. Hull, 2006, Journal of biomechanical engineering.

Lengthening of a single-loop tibialis tendon graft construct after cyclic loading: a study using Roentgen stereophotogrammetric analysis.

M. Hull, S. Howell, C. Smith, 2006, Journal of Biomechanical Engineering.

Migration of radio-opaque markers injected into tendon grafts: a study using roentgen stereophotogrammetric analysis (RSA).

M. Hull, S. Howell, C. Smith, 2005, Journal of biomechanical engineering.

How the fixation method stiffness and initial tension affect anterior load–displacement of the knee and tension in anterior cruciate ligament grafts: A study in cadaveric knees using a double‐loop hamstrings graft

M. Hull, S. Howell, P. Eagar, 2004, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

The sensitivity of tibiofemoral contact pressure to the size and shape of the lateral and medial menisci

M. Hull, M. Rashid, C. Jacobs, 2004, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Use of roentgenography and magnetic resonance imaging to predict meniscal geometry determined with a three‐dimensional coordinate digitizing system

M L Hull, S M Howell, T L Haut, 2000, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Accuracy evaluation of a lower-cost and four higher-cost laser scanners.

Valentina Campanelli, Stephen M Howell, Maury L Hull, 2016, Journal of biomechanics.

Morphological errors in 3D bone models of the distal femur and proximal tibia generated from magnetic resonance imaging and computed tomography determined using two registration methods

Maury L. Hull, Stephen M. Howell, Valentina Campanelli, 2019, Comput. methods Biomech. Biomed. Eng. Imaging Vis..

Small differences in tibial contact locations following kinematically aligned TKA from the native contralateral knee

M. Hull, S. Howell, T. Shelton, 2019, Knee Surgery, Sports Traumatology, Arthroscopy.

Virtual axis finder: a new method to determine the two kinematic axes of rotation for the tibio-femoral joint.

M L Hull, Michelle Roland, S M Howell, 2010, Journal of biomechanical engineering.

A new tibial coordinate system improves the precision of anterior–posterior knee laxity measurements: A cadaveric study using Roentgen stereophotogrammetric analysis

M L Hull, C P Neu, S M Howell, 2005, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Sloped muscle excitation waveforms improve the accuracy of forward dynamic simulations.

M L Hull, Nils Hakansson, M. Hull, 2007, Journal of biomechanics.

Are the maximum shortening velocity and the shape parameter in a Hill-type model of whole muscle related to activation?

M L Hull, M. Hull, M J Camilleri, 2005, Journal of biomechanics.

Articular cartilage deformation determined in an intact tibiofemoral joint by displacement‐encoded imaging

M. Hull, C. Neu, D. Chan, 2009, Magnetic resonance in medicine.

Rotational flexibility of the human knee due to varus/valgus and axial moments in vivo.

M L Hull, M. Hull, O S Mills, 1991, Journal of biomechanics.

The Trochlear Groove of a Femoral Component Designed for Kinematic Alignment Is Lateral to the Quadriceps Line of Force and Better Laterally Covers the Anterior Femoral Resection Than a Mechanical Alignment Design

M. Hull, S. Howell, A. Nedopil, 2022, Journal of personalized medicine.

Differences in Trochlear Morphology from Native Using a Femoral Component Interfaced with an Anatomical Patellar Prosthesis in Kinematic Alignment and Mechanical Alignment

M. Hull, S. Howell, 2020, The Journal of Knee Surgery.

A Best-Fit of an Anatomic Tibial Baseplate Closely Parallels the Flexion-Extension Plane and Covers a High Percentage of the Proximal Tibia

M. Hull, S. Howell, T. Zamora, 2020, The Journal of Knee Surgery.

Implant Survival and Function Ten Years After Kinematically Aligned Total Knee Arthroplasty.

M. Hull, S. Howell, T. Shelton, 2018, The Journal of arthroplasty.

Does varus alignment adversely affect implant survival and function six years after kinematically aligned total knee arthroplasty?

M. Hull, S. Howell, Stelios Papadopoulos, 2015, International Orthopaedics.

Accurate alignment and high function after kinematically aligned TKA performed with generic instruments

Maury L. Hull, Stephen M. Howell, Stelios Papadopoulos, 2013, Knee Surgery, Sports Traumatology, Arthroscopy.

What are the bias, imprecision, and limits of agreement for finding the flexion-extension plane of the knee with five tibial reference lines?

M. Hull, S. Howell, A. Brar, 2016, The Knee.

A biomechanical evaluation of anterior and posterior tibialis tendons as suitable single-loop anterior cruciate ligament grafts.

M. Hull, T. H. Haut Donahue, S. Howell, 2002, Arthroscopy : the journal of arthroscopic & related surgery : official publication of the Arthroscopy Association of North America and the International Arthroscopy Association.

The effect of lower-limb anatomy on knee loads during seated cycling.

M L Hull, D. W. Jenkins, M. Hull, 1992, Journal of biomechanics.

Anterior laxity and patient-reported outcomes 7 years after ACL reconstruction with a fresh-frozen tibialis allograft

M. Hull, S. Howell, E. Meike, 2017, Knee Surgery, Sports Traumatology, Arthroscopy.

Maximum Total Point Motion of Five Points Versus All Points in Assessing Tibial Baseplate Stability.

Anna L Garverick, Abigail E. Niesen, M. Hull, 2021, Journal of biomechanical engineering.

Propagation of registration errors into the change in maximum total point motion for determining stability of tibial baseplates

Maury L. Hull, Abigail E. Niesen, M. Hull, 2021, Computer methods in biomechanics and biomedical engineering.

Posterior rim loading of a low-conforming tibial insert in unrestricted kinematic alignment is caused by rotational alignment of an asymmetric baseplate designed for mechanical alignment

M. Hull, S. Howell, C. Delman, 2022, Knee Surgery, Sports Traumatology, Arthroscopy.

What mechanisms are associated with tibial component failure after kinematically-aligned total knee arthroplasty?

M. Hull, S. Howell, A. Nedopil, 2017, International Orthopaedics.

Error in maximum total point motion of a tibial baseplate is lower with a reverse-engineered model versus a CAD model using model-based radiostereometric analysis.

Anna L Garverick, Abigail E. Niesen, M. Hull, 2022, Journal of biomechanics.

Low tibial baseplate migration 1 year after unrestricted kinematically aligned total knee arthroplasty using a medial conforming implant design

Anna L Garverick, Abigail E. Niesen, M. Hull, 2022, Knee Surgery, Sports Traumatology, Arthroscopy.

The posterolateral upslope of a low-conforming insert blocks the medial pivot during a deep knee bend in TKA: a comparative analysis of two implants with different insert conformities

M. Hull, S. Howell, C. Delman, 2021, Knee Surgery, Sports Traumatology, Arthroscopy.

Circle-based model to estimate error in using the lowest points to indicate locations of contact developed by the femoral condyles on the tibial insert in total knee arthroplasty.

M. Hull, Alexander Simileysky, D. Ridenour, 2021, Journal of biomechanics.

A cruciate-retaining implant can treat both knees of most windswept deformities when performed with calipered kinematically aligned TKA

M. Hull, S. Howell, Manpreet Gill, 2020, Knee Surgery, Sports Traumatology, Arthroscopy.

Analysis of differences in laxities and neutral positions from native after kinematically aligned TKA using cruciate retaining implants

M. Hull, S. Howell, J. Roth, 2019, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Does Calipered Kinematically Aligned TKA Restore Native Left to Right Symmetry of the Lower Limb and Improve Function?

M. Hull, S. Howell, A. Nedopil, 2017, The Journal of arthroplasty.

Errors in Calculating Anterior-Posterior Tibial Contact Locations in Total Knee Arthroplasty Using Three-Dimensional Model to Two-Dimensional Image Registration in Radiographs: An In Vitro Study of Two Methods.

Derrick S. Ross, M. Hull, S. Howell, 2017, Journal of biomechanical engineering.

Does Malrotation of the Tibial and Femoral Components Compromise Function in Kinematically Aligned Total Knee Arthroplasty?

M. Hull, S. Howell, A. Nedopil, 2016, The Orthopedic clinics of North America.

Are undesirable contact kinematics minimized after kinematically aligned total knee arthroplasty? An intersurgeon analysis of consecutive patients

M. Hull, S. Howell, T. Meade, 2013, Knee Surgery, Sports Traumatology, Arthroscopy.

Outcomes in Patients with a Calipered Kinematically Aligned TKA That Already Had a Contralateral Mechanically Aligned TKA

M. Hull, S. Howell, Manpreet Gill, 2019, The Journal of Knee Surgery.

Is There a Force Target That Predicts Early Patient-reported Outcomes After Kinematically Aligned TKA?

M. Hull, S. Howell, T. Shelton, 2018, Clinical orthopaedics and related research.

Kinematically aligned total knee arthroplasty limits high tibial forces, differences in tibial forces between compartments, and abnormal tibial contact kinematics during passive flexion

M. Hull, S. Howell, J. Roth, 2018, Knee Surgery, Sports Traumatology, Arthroscopy.

Results of an initial experience with custom-fit positioning total knee arthroplasty in a series of 48 patients.

Robert A Siston, M. Hull, S. Howell, 2008, Orthopedics.

Excellent and Good Results Treating Stiffness with Early and Late Manipulation after Unrestricted Caliper-Verified Kinematically Aligned TKA

M. Hull, S. Howell, A. Nedopil, 2022, Journal of personalized medicine.

Predicting the effect of muscle length on fatigue during electrical stimulation

M. Hull, S. Binder-Macleod, A. Wexler, 2009, Muscle & nerve.

Reorienting the tibial baseplate improves the registration accuracy of model-based radiostereometric analysis.

Abigail E Niesen, Anna L Garverick, Stephen M Howell, 2020, Journal of biomechanics.

Can the efficacy of electrically stimulated pedaling using a commercially available ergometer BE improved by minimizing the muscle stress–time integral?

Maury L Hull, M. Hull, Nils A Hakansson, 2012, Muscle & nerve.

The Effects of Stimulating Lower Leg Muscles on the Mechanical Work and Metabolic Response in Functional Electrically Stimulated Pedaling

M L Hull, M. Hull, N A Hakansson, 2010, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

Muscle Stimulation Waveform Timing Patterns for Upper and Lower Leg Muscle Groups to Increase Muscular Endurance in Functional Electrical Stimulation Pedaling Using a Forward Dynamic Model

Maury L. Hull, Nils A. Hakansson, M. Hull, 2009, IEEE Transactions on Biomedical Engineering.

Evaluation of performance criteria for simulation of submaximal steady-state cycling using a forward dynamic model.

M L Hull, R R Neptune, R. Neptune, 1997, Journal of biomechanical engineering.

Optimized design of an instrumented spatial linkage that minimizes errors in locating the rotational axes of the tibiofemoral joint: a computational analysis.

M L Hull, Daniel P Bonny, S M Howell, 2013, Journal of biomechanical engineering.

A Computational Analysis of Error in Locating the Rotational Axes of the Tibiofemoral Joint With an Instrumented Spatial Linkage

Maury L. Hull, Stephen M. Howell, Daniel P. Bonny, 2012 .

Can a 2D planar model more accurately determine locations of contact developed by the femoral condyles on the tibial insert in total knee arthroplasty than the penetration method?

M. Hull, Alexander Simileysky, 2022, Journal of biomechanics.

A Total Knee Arthroplasty Is Stiffer When the Intraoperative Tibial Force Is Greater than the Native Knee

M. Hull, S. Howell, T. Shelton, 2018, The Journal of Knee Surgery.

Propagation of errors in two methods for determining tibial contact locations using single-plane fluoroscopy following total knee arthroplasty

Maury L. Hull, Stephen M. Howell, Derrick S. Ross, 2017, Comput. methods Biomech. Biomed. Eng. Imaging Vis..

Characterization and Correction of Errors in Computing Contact Location Between Curved Articular Surfaces: Application to Total Knee Arthroplasty.

M. Hull, S. Howell, J. Roth, 2017, Journal of biomechanical engineering.

A method of calculating physiologically relevant joint reaction forces during forward dynamic simulations of movement from an existing knee model.

M L Hull, Michael J Koehle, M. Hull, 2008, Journal of biomechanics.

Design and demonstration of a dynamometric horseshoe for measuring ground reaction loads of horses during racing conditions.

Maury L Hull, Elizabeth S Roland, Susan M Stover, 2005, Journal of biomechanics.

Analysis of Muscular Work in Multisegmental Movements: Application to Cycling

D. A. Hawkins, M. L. Hull, M. Hull, 1990 .

Does the condylar lift-off method or the separation method better detect loss of contact between tibial and femoral implants based on analysis of single-plane radiographs following total knee arthroplasty?

Derrick S. Ross, M. Hull, S. Howell, 2019, Journal of biomechanics.

Simulation of total knee arthroplasty in 5° or 7° valgus: A study of gap imbalances and changes in limb and knee alignments from native

M. Hull, S. Howell, Yu Gu, 2017, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Native Knee Laxities at 0°, 45°, and 90° of Flexion and Their Relationship to the Goal of the Gap-Balancing Alignment Method of Total Knee Arthroplasty.

M. Hull, S. Howell, J. Roth, 2015, The Journal of bone and joint surgery. American volume.

Measurement Error versus Repeated Measurements: A Guide Describing Two Methods for Computing Bias and Precision of Migration Measurements from Double Examinations Using Radiostereometric Analysis.

Abigail E. Niesen, M. Hull, 2022, Journal of Biomechanical Engineering.

Force and Contact Location Measurement Errors of the VERASENSE.

M. Hull, S. Howell, Stephanie Nicolet-Petersen, 2018, Journal of biomechanical engineering.

Correcting for distal femoral asymmetry is necessary to determine postoperative alignment deviations from planned alignment of the femoral component.

M. Hull, J. Boone, S. Howell, 2023, The Knee.

Longitudinal Shapes of the Tibia and Femur are Unrelated and Variable

M. Hull, S. Howell, R. Siston, 2009, Clinical orthopaedics and related research.

A Surgeon That Switched to Unrestricted Kinematic Alignment with Manual Instruments Has a Short Learning Curve and Comparable Resection Accuracy and Outcomes to Those of an Experienced Surgeon

M. Hull, S. Howell, A. Nedopil, 2022, Journal of personalized medicine.

Negligible effect of surgeon experience on the accuracy and time to perform unrestricted caliper verified kinematically aligned TKA with manual instruments

M. Hull, S. Howell, A. Nedopil, 2022, Knee Surgery, Sports Traumatology, Arthroscopy.

Deviations in femoral joint lines using calipered kinematically aligned TKA from virtually planned joint lines are small and do not affect clinical outcomes

M. Hull, S. Howell, A. Nedopil, 2019, Knee Surgery, Sports Traumatology, Arthroscopy.

Caliper-Verified Kinematically Aligned Total Knee Arthroplasty: Rationale, Targets, Accuracy, Balancing, Implant Survival, and Outcomes.

M. Hull, S. Howell, C. Rivière, 2023, Instructional Course Lectures.

Do varus or valgus outliers have higher forces in the medial or lateral compartments than those which are in‐range after a kinematically aligned total knee arthroplasty?: ALIGNED TOTAL KNEE ARTHROPLASTY LIMB AND JOINT LINE ALIGNMENT AFTER KINEMATICALLY

M. Hull, S. Howell, T. Shelton, 2017, The bone & joint journal.

Assessment of the radii of the medial and lateral femoral condyles in varus and valgus knees with osteoarthritis.

Stephen M Howell, Maury L Hull, M. Hull, 2010, The Journal of bone and joint surgery. American volume.

Ball-in-socket medial conformity with posterior cruciate ligament retention neither limits internal tibial rotation and knee flexion nor lowers clinical outcome scores after unrestricted kinematically aligned total knee arthroplasty

M. Hull, S. Howell, A. Nedopil, 2023, International orthopaedics.

Six Commonly Used Postoperative Radiographic Alignment Parameters Do Not Predict Clinical Outcome Scores after Unrestricted Caliper-Verified Kinematically Aligned TKA

M. Hull, S. Howell, T. Zamora, 2022, Journal of personalized medicine.

A TKA Insert with A Lateral Flat Articular Surface Maximizes External and Internal Tibial Orientations without Anterior Lift-Off Relative to Low- and Ultracongruent Surfaces

M. Hull, S. Howell, A. Nedopil, 2022, Journal of personalized medicine.

Increases in tibial force imbalance but not changes in tibiofemoral laxities are caused by varus–valgus malalignment of the femoral component in kinematically aligned TKA

M. Hull, S. Howell, J. Roth, 2018, Knee Surgery, Sports Traumatology, Arthroscopy.

Effect of the Angle of the Femoral and Tibial Tunnels in the Coronal Plane and Incremental Excision of the Posterior Cruciate Ligament on Tension of an Anterior Cruciate Ligament Graft: An in Vitro Study

M. L. Hull, Stephen M. Howell, M. Hull, 2003, The Journal of bone and joint surgery. American volume.

An Improved Tibial Force Sensor to Compute Contact Forces and Contact Locations In Vitro After Total Knee Arthroplasty.

Stephen M Howell, Maury L Hull, Joshua D Roth, 2017, Journal of biomechanical engineering.

Revision of a Medial UKA to a Kinematic Aligned TKA: Comparison of Operative Complexity, Postoperative Alignment, and Outcome Scores to a Primary TKA

M. Hull, S. Howell, Manpreet Gill, 2019, The Journal of Knee Surgery.

A high-accuracy three-dimensional coordinate digitizing system for reconstructing the geometry of diarthrodial joints.

M L Hull, S M Howell, T L Haut, 1998, Journal of biomechanics.

Apparatus to obtain rotational flexibility of the human knee under moment loads in vivo.

M L Hull, O S Mills, M. Hull, 1991, Journal of biomechanics.

Functional roles of the leg muscles when pedaling in the recumbent versus the upright position.

M L Hull, M. Hull, Nils A Hakansson, 2005, Journal of biomechanical engineering.

Heterogeneous three‐dimensional strain fields during unconfined cyclic compression in bovine articular cartilage explants

M. Hull, C. Neu, J. Walton, 2005, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Accuracy assessment of methods for determining hip movement in seated cycling.

M L Hull, R R Neptune, R. Neptune, 1995, Journal of biomechanics.

Direct measurement of strain in the posterolateral bundle of the anterior cruciate ligament.

M L Hull, H A Patterson, M. Hull, 1997, Journal of biomechanics.

Quadriceps load aggravates and roofplasty mitigates active impingement of anterior cruciate ligament grafts against the intercondylar roof

M. Hull, S. Howell, Ben C. Goss, 1998, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Contact pressure and tension in anterior cruciate ligament grafts subjected to roof impingement during passive extension

M L Hull, S M Howell, M. Hull, 1997, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Design and demonstration of a new instrumented spatial linkage for use in a dynamic environment: application to measurement of ankle rotations during snowboarding.

M L Hull, Josh Nordquist, M. Hull, 2007, Journal of biomechanical engineering.

Analysis of Skiing Accidents Involving Combined Injuries to the Medial Collateral and Anterior Cruciate Ligaments

M L Hull, M. Hull, 1997, The American journal of sports medicine.

Measurement of strength and loading variables on the knee during Alpine skiing.

M L Hull, M. Hull, S M Maxwell, 1989, Journal of biomechanics.

Can an isometer predict the tensile behavior of a double‐looped hamstring graft during anterior cruciate ligament reconstruction?

M. Hull, S. Howell, M. P. Wallace, 1998, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

The effect of intersegmental knee moments on patellofemoral contact mechanics in cycling.

M. Hull, S. Howell, J. Wolchok, 1998, Journal of biomechanics.

A theoretical basis for interpreting the force applied to the pedal in cycling.

M L Hull, S A Kautz, S. Kautz, 1993, Journal of biomechanics.

Tension in a double loop tendon anterior cruciate graft during a simulated open chain knee extension exercise

M. Hull, S. Howell, A. Karchin, 2005, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Initial tension and anterior load-displacement behavior of high-stiffness anterior cruciate ligament graft constructs.

M. Hull, S. Howell, A. Karchin, 2004, The Journal of bone and joint surgery. American volume.

An implantable transducer for measuring tension in an anterior cruciate ligament graft.

M. Hull, S. Howell, J. Wolchok, 1998, Journal of biomechanical engineering.

Aggressive rehabilitation using hamstring tendons: graft construct, tibial tunnel placement, fixation properties, and clinical outcome.

M. Hull, S. Howell, 1998, The American journal of knee surgery.

An activation-recruitment scheme for use in muscle modeling.

M L Hull, D A Hawkins, M. Hull, 1992, Journal of biomechanics.

In situ deformation of cartilage in cyclically loaded tibiofemoral joints by displacement-encoded MRI.

M L Hull, C P Neu, M. Hull, 2009, Osteoarthritis and cartilage.

Foam-Reinforced Elderly Human Tibia Approximates Young Human Tibia Better than Porcine Tibia

M. Hull, S. Howell, Dustin M Grover, 2004, The American journal of sports medicine.

Multivariable optimization of cycling biomechanics.

M L Hull, H Gonzalez, M. Hull, 1989, Journal of biomechanics.

New algorithm for selecting meniscal allografts that best match the size and shape of the damaged meniscus

Stephen M Howell, Maury L Hull, M. Hull, 2006, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Dehydration rates of meniscus and articular cartilage in vitro using a fast and accurate laser-based coordinate digitizing system.

M L Hull, M. Hull, An Pham, 2007, Journal of biomechanics.

MRI‐based technique for determining nonuniform deformations throughout the volume of articular cartilage explants

M. Hull, M. Buonocore, C. Neu, 2005, Magnetic resonance in medicine.

Rider/Bicycle Interaction Loads during Standing Treadmill Cycling

M. L. Hull, Cal Stone, M. Hull, 1993 .

How frequent is rotational mismatch within 0°±10° in kinematically aligned total knee arthroplasty?

Stephen M Howell, Maury L Hull, Maximilian Rudert, 2013, Orthopedics.

An improved accuracy six-load component pedal dynamometer for cycling.

M L Hull, T Boyd, D Wootten, 1996, Journal of biomechanics.

A new load application system for in vitro study of ligamentous injuries to the human knee joint.

M L Hull, J M Bach, M. Hull, 1995, Journal of biomechanical engineering.

Implementation of a five degree of freedom automated system to determine knee flexibility in vitro.

M L Hull, G S Berns, H A Patterson, 1990, Journal of biomechanical engineering.

Use of Roentgenography and Magnetic Resonance Imaging to Predict Meniscal Geometry Determined with a Three-dimensional Coordinate Digitizing System

M. Hull, S. Howell, T. L. Haut, 2000 .

Identification of cross-sectional parameters of lateral meniscal allografts that predict tibial contact pressure in human cadaveric knees.

Stephen M Howell, M L Hull, Tammy Haut Donahue, 2002, Journal of biomechanical engineering.

How cyclic loading affects the migration of radio-opaque markers attached to tendon grafts using a new method: a study using roentgen stereophotogrammetric analysis (RSA).

M. Hull, S. Howell, P. Roos, 2004, Journal of biomechanical engineering.

Experimental optimization of pivot point height for swing-arm type rear suspensions in off-road bicycles.

M L Hull, Ari Karchin, M. Hull, 2002, Journal of biomechanical engineering.

Quantification of structural loading during off-road cycling.

M L Hull, D S De Lorenzo, M. Hull, 1999, Journal of biomechanical engineering.

An Off-Road Bicycle With Adjustable Suspension Kinematics

M. L. Hull, S. A. Needle, M. Hull, 1997 .

Design of Aluminum Bicycle Frames

M. L. Hull, M. Hull, R. R. Davis, 1981 .

Muscle force as affected by fatigue: mathematical model and experimental verification.

M L Hull, D Hawkins, M. Hull, 1993, Journal of biomechanics.

Posterior cruciate ligament retention with medial ball-in-socket conformity promotes internal tibial rotation and knee flexion while providing high clinical outcome scores.

M. Hull, S. Howell, C. Delman, 2023, The Knee.

On the relation between joint moments and pedalling rates at constant power in bicycling.

M L Hull, R Redfield, M. Hull, 1986, Journal of biomechanics.

A method for quantifying the anterior load-displacement behavior of the human knee in both the low and high stiffness regions.

M. Hull, S. Howell, Paul Eagar, 2001, Journal of biomechanics.

Does a tensioning device pinned to the tibia improve knee anterior–posterior load‐displacement compared to manual tensioning of the graft following anterior cruciate ligament reconstruction? A cadaveric study of two tibial fixation devices

M L Hull, S M Howell, M. Hull, 2006, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

In vivo calibration of a femoral fixation device transducer for measuring anterior cruciate ligament graft tension: a study in an ovine model.

M L Hull, S M Howell, M. Hull, 2001, Journal of biomechanical engineering.

An MRI-based method to align the compressive loading axis for human cadaveric knees.

M. Hull, C. Neu, K. J. Martin, 2007, Journal of biomechanical engineering.

Static and fatigue strength of a fixation device transducer for measuring anterior cruciate ligament graft tension.

M L Hull, S M Howell, M. Hull, 2000, Journal of biomechanical engineering.

A microcomputer controlled snow ski binding system--II. Release decision theories.

M L Hull, D MacGregor, M. Hull, 1985, Journal of biomechanics.

Dynamic simulation of the leg in torsion.

M. Hull, L. Dorius, 1984, Journal of biomechanics.

Measurement of Tibial Orientation Helps Select the Optimal Insert Thickness to Personalize PCL Tension in a Medial Ball-in-Socket TKA

M. Hull, S. Howell, A. Nedopil, 2022, Journal of personalized medicine.

A comparison of muscular mechanical energy expenditure and internal work in cycling.

M L Hull, R R Neptune, S A Kautz, 1994, Journal of biomechanics.

Coordinate system requirements to determine motions of the tibiofemoral joint free from kinematic crosstalk errors.

Maury L Hull, M. Hull, 2020, Journal of biomechanics.

Measuring Tibial Forces is More Useful than Varus-Valgus Laxities for Identifying and Correcting Overstuffing in Kinematically Aligned Total Knee Arthroplasty

M. Hull, S. Howell, J. Roth, 2019, medRxiv.

Carrier detection of Duchenne dystrophy by frequency analysis of the electromyogram.

R. Shumway, M. Hull, B. Preising, 1988, Journal of biomedical engineering.

A Torn or Reconstructed Anterior Cruciate Ligament Does Not Adversely Affect Clinical Outcome Scores and the Incidence of Reoperation after Unrestricted Kinematically Aligned TKA.

Alexander J. Nedopil, M. Hull, S. Howell, 2023, The Journal of arthroplasty.

Does A Kinematically Aligned Total Knee Arthroplasty Restore Function Without Failure Regardless of Alignment Category?

M. Hull, S. Howell, S. Howell, 2013, Clinical orthopaedics and related research.

A New Force Plate Design Incorporating Octagonal Strain Rings

M. L. Hull, David Hawkins, Richard Brewer, 1995 .

Prediction of pedal forces in bicycling using optimization methods.

M L Hull, R Redfield, M. Hull, 1986, Journal of biomechanics.

Three-dimensional knee joint loading during seated cycling.

M L Hull, D Hawkins, M. Hull, 1992, Journal of biomechanics.

A mechanically decoupled two force component bicycle pedal dynamometer.

M L Hull, J Newmiller, F E Zajac, 1988, Journal of biomechanics.

Accurate alignment and high function after kinematically aligned TKA performed with generic instruments

M. Hull, S. Howell, Stelios Papadopoulos, 2013, Knee Surgery, Sports Traumatology, Arthroscopy.