Salim Ahmed

发表

Modeling of temperature distribution and oil displacement during thermal recovery in porous media: A critical review

Mohammad Islam Miah, M. Hossain, M. I. Miah, 2018, Fuel.

Process Identification from Sinusoidal Test Data by Estimating Step Response

Sirish L. Shah, Salim Ahmed, Biao Huang, 2009 .

Connectionist and mutual information tools to determine water saturation and rank input log variables

Mohammad Islam Miah, M. I. Miah, Salim Ahmed, 2020 .

Parameter and delay estimation of continuous-time models using a linear filter

Sirish L. Shah, Salim Ahmed, Biao Huang, 2006 .

Operational loss modelling for process facilities using multivariate loss functions

Salim Ahmed, F. Khan, S. Hashemi, 2015 .

Fractional order model identification using the sinusoidal input.

Salim Ahmed, S. Imtiaz, Salim Ahmed, 2018, ISA transactions.

Parameter and delay estimation of fractional order models from step response

Salim Ahmed, 2015 .

Identification of integrating processes with time delay

C. S. Cox, Syed Imtiaz, Salim Ahmed, 2013 .

Process Identification using Nonideal Step Inputs

Salim Ahmed, 2010 .

Dynamic risk management of assets susceptible to pitting corrosion

Salim Ahmed, F. Khan, Elahe Shekari, 2019, Corrosion Engineering, Science and Technology.

Identification of MIMO Continuous-Time Models Using Simultaneous Step Inputs

S. Imtiaz, Salim Ahmed, 2015 .

An Insurance Model for Risk Management of Process Facilities

Salim Ahmed, F. Khan, S. Hashemi, 2018, Risk analysis : an official publication of the Society for Risk Analysis.

A methodology to assess human-automated system conflict from safety perspective

Md. Tanjin Amin, S. Imtiaz, Salim Ahmed, 2022, Comput. Chem. Eng..

Extreme wind load analysis using non-stationary risk-based approach

S. Imtiaz, Salim Ahmed, Faisal Khan, 2022, Safety in Extreme Environments.

Dependency effect on the reliability-based design optimization of complex offshore structure

Salim Ahmed, A. Okoro, Faisal Khan, 2022, Reliab. Eng. Syst. Saf..

Learning process safety principles through practice

Faisal Khan, My Gunasekera, Salim Ahmed, 2018 .

TEACHING AND ASSESSING LIFELONG LEARNING IN LABORATORY COURSES

Salim Ahmed, 2018 .

An energy-efficient dynamic positioning controller for high sea conditions

S. Imtiaz, Salim Ahmed, Mohammed Islam, 2022, Applied Ocean Research.

A predictive approach to fitness-for-service assessment of pitting corrosion

Salim Ahmed, Faisal Khan, Elahe Shekari, 2016 .

A Methodical Approach for Knowledge-based Fire and Explosion Accident Likelihood Analysis

Mohammad Zaid Kamil, Salim Ahmed, P. Amyotte, 2022, Process Safety and Environmental Protection.

Step Response-Based Identification of Fractional Order Time Delay Models

Salim Ahmed, 2020, Circuits, Systems, and Signal Processing.

Dynamic hazard identification and scenario mapping using Bayesian network

Faisal Khan, Salim Ahmed, Peiwei Xin, 2017 .

Multivariate probabilistic safety analysis of process facilities using the Copula Bayesian Network model

Salim Ahmed, Faisal I. Khan, Seyed Javad Hashemi, 2016, Comput. Chem. Eng..

Sparse principal component analysis using bootstrap method

Syed Imtiaz, Salim Ahmed, Abdalhamid Rahoma, 2021, Chemical Engineering Science.

A conditional dependence-based marine logistics support risk model

Syed Imtiaz, Salim Ahmed, Arifusalam Shaikh, 2020, Reliab. Eng. Syst. Saf..

Process Parameter and Delay Estimation from Non-uniformly Sampled Data

Sirish L. Shah, Biao Huang, Salim Ahmed, 2008 .

PARAMETER AND DELAY ESTIMATION OF CONTINUOUS-TIME MODELS FROM IRREGULARLY SAMPLED OUTPUT

Sirish L. Shah, Biao Huang, Salim Ahmed, 2006 .

How can process safety and a risk management approach guide pandemic risk management?

Faisal Khan, Paul Amyotte, Syed Imtiaz, 2020, Journal of Loss Prevention in the Process Industries.

Pandemic risk management using engineering safety principles

S. Imtiaz, Salim Ahmed, F. Khan, 2021, Process Safety and Environmental Protection.

Methods and models in process safety and risk management: Past, present and future

Faisal Khan, Salim Ahmed, Samith Rathnayaka, 2015 .

Model development for shear sonic velocity using geophysical log data: Sensitivity analysis and statistical assessment

Mohammad Islam Miah, Salim Ahmed, S. Zendehboudi, 2021 .

Development of scaling criteria for enhanced oil recovery: A review

M. Enamul Hossain, Salim Ahmed, Fatema Akter Happy, 2017 .

Development of scaling criteria for steam flooding EOR process

M. Hossain, Salim Ahmed, Arifur Rahman, 2020, Journal of Petroleum Exploration and Production Technology.

An Active Learning Polynomial Chaos Kriging metamodel for reliability assessment of marine structures

Faisal Khan, Aghatise Okoro, Salim Ahmed, 2021 .

Integration of process safety in equipment design: A framework for academic learning activity

Salim Ahmed, Faisal Khan, MY Gunasekera, 2020 .

Control engineering practice in 25 years: A bibliometric overview

Biao Huang, Salim Ahmed, Salim Ahmed, 2019, Control Engineering Practice.

An analysis of process fault diagnosis methods from safety perspectives

Faisal Khan, Syed Imtiaz, Salim Ahmed, 2021, Comput. Chem. Eng..

Economic risk analysis of pitting corrosion in process facilities

Faisal Khan, Salim Ahmed, Elahe Shekari, 2017 .

Causality analysis for root cause diagnosis in Fluid Catalytic Cracking unit

Faisal Khan, Syed Imtiaz, Salim Ahmed, 2015 .

A risk-based shutdown inspection and maintenance interval estimation considering human error

Abdul Hameed, Faisal Khan, Salim Ahmed, 2016 .

Resilience assessment of offshore structures subjected to ice load considering complex dependencies

Salim Ahmed, B. Colbourne, Mohammed Taleb-berrouane, 2022, Reliab. Eng. Syst. Saf..

A multivariate model to estimate environmental load on an offshore structure

Salim Ahmed, B. Colbourne, Mohammed Taleb-berrouane, 2023, Ocean Engineering.

Environmental load estimation for offshore structures considering parametric dependencies

Salim Ahmed, B. Colbourne, Mohammed Taleb-berrouane, 2021, Safety in Extreme Environments.

Correlation and Dependency in Multivariate Process Risk Assessment

Faisal Khan, Seyed Javad Hashemi, Salim Ahmed, 2015 .

Performance Assessment of DP Control Systems for Different Sea States

Salim Ahmed, Syed Imtiaz, Hasanat Zaman, 2020, 2020 IEEE/OES Autonomous Underwater Vehicles Symposium (AUV)(50043).

Dynamic Positioning of Vessels Using a UKF-Based Observer and an NMPC-Based Controller

Awantha Jayasiri, Anirudh Nandan, Don Spencer, 2017, IEEE Transactions on Automation Science and Engineering.

An optimum control-based approach for Dynamic Positioning of vessels

Awantha Jayasiri, Anirudh Nandan, Syed Imtiaz, 2016, 2016 IEEE 55th Conference on Decision and Control (CDC).

Detection and diagnosis of process fault using unsupervised learning methods and unlabeled data

S. Imtiaz, Salim Ahmed, Abdalhamid Rahoma, 2023, International Journal of Advances in Engineering Sciences and Applied Mathematics.

Development of risk model for marine logistics support to offshore oil and gas operations in remote and harsh environments

Faisal Khan, Samsur Rahman, Syed Imtiaz, 2019, Ocean Engineering.

Step Response-Based Identification of Fractional Order Time Delay Models

Salim Ahmed, Salim Ahmed, 2020, Circuits Syst. Signal Process..

A data-driven Bayesian network learning method for process fault diagnosis

Faisal Khan, Syed Imtiaz, Salim Ahmed, 2021 .

A deep learning model for process fault prognosis

Syed Imtiaz, Rajeevan Arunthavanathan, Faisal Khan, 2021, Process Safety and Environmental Protection.

Risk-based fault detection and diagnosis for nonlinear and non-Gaussian process systems using R-vine copula

Faisal Khan, Syed Imtiaz, Salim Ahmed, 2021 .

A Bibliometric Review and Analysis of Data-Driven Fault Detection and Diagnosis Methods for Process Systems

Faisal Khan, Syed Imtiaz, Salim Ahmed, 2018, Industrial & Engineering Chemistry Research.

Dynamic quantitative operational risk assessment of chemical processes

Syed Imtiaz, Salim Ahmed, Faisal Khan, 2016 .

Risk-based operational performance analysis using loss functions

Faisal Khan, Salim Ahmed, Seyed Javad Hashemi, 2014 .

Loss functions and their applications in process safety assessment

Faisal Khan, Salim Ahmed, Seyed Javad Hashemi, 2014 .

A novel data‐driven methodology for fault detection and dynamic risk assessment

Faisal Khan, Syed Imtiaz, Salim Ahmed, 2020 .

Robust Process Monitoring Methodology for Detection and Diagnosis of Unobservable Faults

Syed Imtiaz, Salim Ahmed, Faisal Khan, 2019, Industrial & Engineering Chemistry Research.

Mapping Topics for Program Enhancement in Undergraduate Process Engineering Education

Salim Ahmed, Darlene Spracklin-Reid, Kelly Hawboldt, 2013 .

Textual data transformations using natural language processing for risk assessment.

Mohammad Zaid Kamil, Salim Ahmed, P. Amyotte, 2023, Risk analysis : an official publication of the Society for Risk Analysis.

Probabilistic Modeling of Pitting Corrosion in Insulated Components Operating in Offshore Facilities

Faisal Khan, Salim Ahmed, Elahe Shekari, 2017 .

Safety challenges in harsh environments: Lessons learned

Salim Ahmed, Seyed Javad Hashemi, Dan Oldford, 2015 .

Probabilistic modeling of business interruption and reputational losses for process facilities

Faisal Khan, Salim Ahmed, Seyed Javad Hashemi, 2015 .

Log data-driven model and feature ranking for water saturation prediction using machine learning approach

Salim Ahmed, Sohrab Zendehboudi, Mohammad Islam Miah, 2020 .

Integrity challenges in harsh environments: lessons learned and potential development strategies

Ming Yang, Faisal Khan, Salim Ahmed, 2014 .

CAE Analysis of Crankshaft for Testing Dynamic Loads for Reducing Cost & Weight

T. A. Khan, Salim Ahmed, 2013 .

Machine Learning Approach to Model Rock Strength: Prediction and Variable Selection with Aid of Log Data

Sohrab Zendehboudi, Mohammad Islam Miah, Salim Ahmed, 2020, Rock Mechanics and Rock Engineering.

Evolving extreme events caused by climate change: A tail based Bayesian approach for extreme event risk analysis

S. Imtiaz, Salim Ahmed, F. Khan, 2021, Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability.

Rare event risk analysis – application to iceberg collision

Faisal Khan, Syed Imtiaz, Salim Ahmed, 2020 .

A generalized framework for risk-based extreme load analysis in offshore system design

S. Imtiaz, Salim Ahmed, Faisal Khan, 2022, Journal of Offshore Mechanics and Arctic Engineering.

Autonomous Fault Diagnosis and Root Cause Analysis for the Processing System Using One-Class SVM and NN Permutation Algorithm

S. Imtiaz, Salim Ahmed, F. Khan, 2022, Industrial & Engineering Chemistry Research.

Process Safety Assessment Considering Multivariate Non-linear Dependence Among Process Variables

Faisal Khan, Salim Ahmed, Risza Rusli, 2020 .

Operational risk assessment model for marine vessels

Abdul Aziz, Faisal Khan, Salim Ahmed, 2019, Reliab. Eng. Syst. Saf..

Fault detection and diagnosis in process system using artificial intelligence-based cognitive technique

Syed Imtiaz, Salim Ahmed, Risza Rusli, 2020, Comput. Chem. Eng..

Reliability assessment of marine structures considering multidimensional dependency of the variables

Faisal Khan, Salim Ahmed, Okoro Aghatise, 2021 .

Conceptual framework for an event-based plant alarm system

Faisal Khan, Salim Ahmed, Pradeep Dalpatadu, 2014, Proceeding of the 11th World Congress on Intelligent Control and Automation.

Alarm allocation for event-based process alarm systems

Faisal Khan, Salim Ahmed, Pradeep Dalapatu, 2013 .

Risk based alarm design: A systems approach

Hossam A. Gabbar, Faisal I. Khan, Salim Ahmed, 2011, 2011 International Symposium on Advanced Control of Industrial Processes (ADCONIP).

Identification from step responses with transient initial conditions

Sirish L. Shah, Biao Huang, Salim Ahmed, 2008 .

Novel identification method from step response

Sirish L. Shah, Biao Huang, Salim Ahmed, 2007 .

A hybrid model for predicting product sulfur concentration of diesel hydrogen desulfurization process

Salim Ahmed, Prafull Sharma, Syed Imtiaz, 2018, Chemometrics and Intelligent Laboratory Systems.

An ontology-based methodology for hazard identification and causation analysis

Faisal Khan, Abdul Aziz, Salim Ahmed, 2019, Process Safety and Environmental Protection.

A sequential optimization procedure to tune MIMO PID controllers

Salim Ahmed, Syed A. Imtiaz, Eugenio Turco Neto, 2017, 2017 Indian Control Conference (ICC).

Bayesian method for event-based alarm annunciation

Faisal Khan, Salim Ahmed, Pradeep Dalpatadu, 2015 .

Loss scenario analysis and loss aggregation for process facilities

Faisal Khan, Salim Ahmed, Seyed Javad Hashemi, 2015 .

Integrating Process Dynamics in Data-driven Models of Chemical Processing Systems

S. Imtiaz, Salim Ahmed, F. Khan, 2023, Process Safety and Environmental Protection.

A Probabilistic Risk Assessment of Offshore Flaring Systems Using Bayesian Network

S. Imtiaz, Salim Ahmed, Faisal Khan, 2020 .