G. Bergmann

发表

Five month in vivo measurement of hip joint forces

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 1989 .

Musculo-skeletal loading conditions at the hip during walking and stair climbing.

G. Bergmann, L. Claes, M. Heller, 2001, Journal of biomechanics.

Hip contact forces and gait patterns from routine activities.

G. Bergmann, F. Graichen, A. Rohlmann, 2001, Journal of biomechanics.

Loading of the knee joint during activities of daily living measured in vivo in five subjects.

G. Bergmann, F. Graichen, A. Rohlmann, 2010, Journal of biomechanics.

ESB Clinical Biomechanics Award 2008: Complete data of total knee replacement loading for level walking and stair climbing measured in vivo with a follow-up of 6-10 months.

G. Bergmann, F. Graichen, A. Rohlmann, 2009, Clinical biomechanics.

Design, calibration and pre-clinical testing of an instrumented tibial tray.

G. Bergmann, F. Graichen, A. Rohlmann, 2007, Journal of biomechanics.

Standardized Loads Acting in Hip Implants

G. Bergmann, G. Duda, A. Bender, 2014, PloS one.

Spinal loads as influenced by external loads: a combined in vivo and in silico investigation.

G. Bergmann, A. Rohlmann, M. Dreischarf, 2015, Journal of biomechanics.

Applying a follower load delivers realistic results for simulating standing.

A Rohlmann, G Bergmann, G. Bergmann, 2009, Journal of biomechanics.

Loads on an internal spinal fixation device during walking.

A Rohlmann, G Bergmann, F Graichen, 1997, Journal of biomechanics.

Loads on an internal spinal fixation device during sitting.

A Rohlmann, G Bergmann, F Graichen, 2001, Journal of biomechanics.

Loads on an internal spinal fixation device during physical therapy.

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2002, Physical therapy.

In vivo measurements of the effect of whole body vibration on spinal loads

Antonius Rohlmann, Georg Bergmann, Philipp Damm, 2013, European Spine Journal.

Standardized Loads Acting in Knee Implants

G. Bergmann, F. Graichen, A. Rohlmann, 2014, PloS one.

An EMG-driven musculoskeletal model of the shoulder.

A. A. Nikooyan, F. V. D. van der Helm, H. Veeger, 2012, Human movement science.

Hip joint loading during walking and running, measured in two patients.

G. Bergmann, F. Graichen, A. Rohlmann, 1993, Journal of biomechanics.

Hip joint contact forces during stumbling

G. Bergmann, F. Graichen, A. Rohlmann, 2004, Langenbeck's Archives of Surgery.

Estimation of muscle forces in the lumbar spine during upper-body inclination.

G. Bergmann, A. Rohlmann, T. Zander, 2001, Clinical biomechanics.

Effect of a pedicle-screw-based motion preservation system on lumbar spine biomechanics: a probabilistic finite element study with subsequent sensitivity analysis.

G. Bergmann, A. Rohlmann, T. Zander, 2010, Journal of biomechanics.

Flexible non-fusion scoliosis correction systems reduce intervertebral rotation less than rigid implants and allow growth of the spine: a finite element analysis of different features of orthobiom™

G. Bergmann, A. Rohlmann, T. Zander, 2008, European Spine Journal.

In vivo gleno-humeral joint loads during forward flexion and abduction.

G. Bergmann, F. Graichen, A. Rohlmann, 2011, Journal of biomechanics.

In vivo measurement of shoulder joint loads during walking with crutches.

G. Bergmann, F. Graichen, A. Rohlmann, 2012, Clinical biomechanics.

Patellofemoral joint contact forces during activities with high knee flexion

G. Bergmann, W. Taylor, M. Heller, 2012, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Influence of femoral anteversion on proximal femoral loading: measurement and simulation in four patients.

G. Bergmann, L. Claes, M. Heller, 2001, Clinical biomechanics.

Interfacial conditions between a press-fit acetabular cup and bone during daily activities: implications for achieving bone in-growth.

G. Bergmann, E. Schneider, M. Morlock, 2000, Journal of Biomechanics.

Comparison of in vivo measured loads in knee, hip and spinal implants during level walking.

G. Bergmann, A. Rohlmann, I. Kutzner, 2017, Journal of biomechanics.

Comparison of the effects of bilateral posterior dynamic and rigid fixation devices on the loads in the lumbar spine: a finite element analysis

G. Bergmann, A. Rohlmann, T. Zander, 2007, European Spine Journal.

Finite-element-analysis and experimental investigation of stresses in a femur.

A Rohlmann, U Mössner, G Bergmann, 1982, Journal of biomedical engineering.

In vivo glenohumeral contact forces--measurements in the first patient 7 months postoperatively.

A Rohlmann, G Bergmann, F Graichen, 2007, Journal of biomechanics.

Loading of the knee joint during ergometer cycling: telemetric in vivo data.

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2012, The Journal of orthopaedic and sports physical therapy.

Optimal stiffness of a pedicle-screw-based motion preservation implant for the lumbar spine

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2012, European Spine Journal.

Hip endoprosthesis for in vivo measurement of joint force and temperature.

A Rohlmann, G Bergmann, F Graichen, 1999, Journal of biomechanics.

Physical Activities That Cause High Friction Moments at the Cup in Hip Implants

G. Bergmann, G. Duda, A. Bender, 2018, The Journal of bone and joint surgery. American volume.

High-Tech Hip Implant for Wireless Temperature Measurements In Vivo

Antonius Rohlmann, Georg Bergmann, Philipp Damm, 2012, PloS one.

Frictional heating of total hip implants. Part 2: finite element study.

N Verdonschot, A Rohlmann, G Bergmann, 2001, Journal of biomechanics.

Frictional heating of total hip implants. Part 1: measurements in patients.

N Verdonschot, A Rohlmann, G Bergmann, 2001, Journal of biomechanics.

Is staircase walking a risk for the fixation of hip implants?

A Rohlmann, G Bergmann, F Graichen, 1995, Journal of biomechanics.

A comparison of hip joint forces in sheep, dog and man.

A Rohlmann, G Bergmann, J Siraky, 1984, Journal of biomechanics.

Hip joint forces in sheep.

A Rohlmann, G Bergmann, F Graichen, 1999, Journal of biomechanics.

Long term animal test with instrumented hip implants

G. Bergmann, F. Graichen, A. Rohlmann, 1987 .

A probabilistic finite element analysis of the stresses in the augmented vertebral body after vertebroplasty

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2010, European Spine Journal.

Effect of an artificial disc on lumbar spine biomechanics: a probabilistic finite element study

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2008, European Spine Journal.

In vivo implant forces acting on a vertebral body replacement during upper body flexion.

Antonius Rohlmann, Marcel Dreischarf, Georg Bergmann, 2015, Journal of biomechanics.

Determination of trunk muscle forces for flexion and extension by using a validated finite element model of the lumbar spine and measured in vivo data.

Antonius Rohlmann, Georg Bergmann, Hans-Joachim Wilke, 2006, Journal of biomechanics.

Optimised loads for the simulation of axial rotation in the lumbar spine.

Antonius Rohlmann, Marcel Dreischarf, Georg Bergmann, 2011, Journal of biomechanics.

Diurnal variations in intervertebral disc height affect spine flexibility, intradiscal pressure and contact compressive forces in the facet joints

G. Bergmann, A. Rohlmann, T. Zander, 2010, Computer methods in biomechanics and biomedical engineering.

Influence of different artificial disc kinematics on spine biomechanics.

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2009, Clinical biomechanics.

Realistic loading conditions for upper body bending.

A Rohlmann, G Bergmann, G. Bergmann, 2009, Journal of biomechanics.

Effects of fusion-bone stiffness on the mechanical behavior of the lumbar spine after vertebral body replacement.

G. Bergmann, A. Rohlmann, T. Zander, 2006, Clinical biomechanics.

Analysis of the influence of disc degeneration on the mechanical behaviour of a lumbar motion segment using the finite element method.

Antonius Rohlmann, Georg Bergmann, Hendrik Schmidt, 2006, Journal of biomechanics.

Effect of a posterior dynamic implant adjacent to a rigid spinal fixator.

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2006, Clinical biomechanics.

A spinal fixation device for in vivo load measurement.

A Rohlmann, G Bergmann, F Graichen, 1994, Journal of biomechanics.

Influence of Muscle Forces on Loads in Internal Spinal Fixation Devices

A Rohlmann, G Bergmann, F Graichen, 1998, Spine.

Estimation of trunk muscle forces using the finite element method and in vivo loads measured by telemeterized internal spinal fixation devices.

A Rohlmann, G Bergmann, J Calisse, 1999, Journal of biomechanics.

Loads on internal spinal fixators measured in different body positions

A. Rohlmann, G. Bergmann, F. Graichen, 1999, European Spine Journal.

Changes in the loads on an internal spinal fixator after iliac-crest autograft.

G. Bergmann, F. Graichen, A. Rohlmann, 2000, The Journal of bone and joint surgery. British volume.

Influence of a Follower Load on Intradiscal Pressure and Intersegmental Rotation of the Lumbar Spine

L Claes, A Rohlmann, G Bergmann, 2001, Spine.

ISSLS Prize Winner: A Novel Approach to Determine Trunk Muscle Forces During Flexion and Extension: A Comparison of Data From an In Vitro Experiment and In Vivo Measurements

L Claes, A Rohlmann, G Bergmann, 2003, Spine.

Tibio‐femoral loading during human gait and stair climbing

William R Taylor, Georg Bergmann, Georg N Duda, 2004, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Influence of a screw with a hinge on the pull-out force at the cranial end vertebra in ventral derotation spondylodesis (VDS)

G. Bergmann, A. Rohlmann, C. Klöckner, 2003, Archives of Orthopaedic and Trauma Surgery.

Tibio-Femoral Contact Force Distribution is Not the Only Factor Governing Pivot Location after Total Knee Arthroplasty

G. Bergmann, W. Taylor, G. Duda, 2019, Scientific Reports.

European Society of Biomechanics S.M. Perren Award 2022: Standardized tibio-femoral implant loads and kinematics.

Colin R. Smith, G. Bergmann, W. Taylor, 2022, Journal of Biomechanics.

Does aquatic exercise reduce hip and knee joint loading? In vivo load measurements with instrumented implants

G. Bergmann, G. Duda, I. Kutzner, 2017, PloS one.

Determination of typical patterns from strongly varying signals

G. Bergmann, A. Bender, 2012, Computer methods in biomechanics and biomedical engineering.

In vivo measured joint friction in hip implants during walking after a short rest

G. Bergmann, G. Duda, A. Bender, 2017, PloS one.

In vivo hip joint loads and pedal forces during ergometer cycling.

G. Bergmann, G. Duda, A. Bender, 2017, Journal of biomechanics.

Postoperative Changes in In Vivo Measured Friction in Total Hip Joint Prosthesis during Walking

G. Bergmann, A. Bender, P. Damm, 2015, PloS one.

European Society of Biomechanics S.M. Perren Award 2022: Standardized tibio-femoral implant loads and kinematics.

Colin R. Smith, G. Bergmann, W. Taylor, 2022, Journal of biomechanics.

Relative contribution of different muscle energy consumption processes in an energy-based muscle load sharing cost function

H. Veeger, G. Bergmann, F. Helm, 2013 .

Material properties of femoral cancellous bone in axial loading

G. Bergmann, A. Rohlmann, R. Kölbel, 2004, Archives of orthopaedic and traumatic surgery.

Duration and frequency of every day activities in total hip patients.

M Honl, E Schneider, G Bergmann, 2001, Journal of biomechanics.

Friction in Total Hip Joint Prosthesis Measured In Vivo during Walking

Georg Bergmann, Philipp Damm, Friedmar Graichen, 2013, PloS one.

In Vivo Hip Joint Loading during Post-Operative Physiotherapeutic Exercises

G. Bergmann, F. Graichen, A. Bender, 2013, PloS one.

Implantable Sensor Technology: From Research to Clinical Practice

Georg Bergmann, Rebecca A. Wachs, Eric H Ledet, 2012, The Journal of the American Academy of Orthopaedic Surgeons.

Realistic loads for testing hip implants.

G Bergmann, F Graichen, A Rohlmann, 2010, Bio-medical materials and engineering.

Total hip joint prosthesis for in vivo measurement of forces and moments.

Antonius Rohlmann, Georg Bergmann, Philipp Damm, 2010, Medical engineering & physics.

An instrumented implant for in vivo measurement of contact forces and contact moments in the shoulder joint.

A Rohlmann, G Bergmann, F Graichen, 2009, Medical engineering & physics.

In vivo measurement of shoulder joint loads during activities of daily living.

A. Rohlmann, A. Bender, P. Westerhoff, 2009, Journal of biomechanics.

Design and calibration of load sensing orthopaedic implants.

A Rohlmann, G Bergmann, F Graichen, 2008, Journal of biomechanical engineering.

[Musculoskeletal biomechanics of the knee joint. Principles of preoperative planning for osteotomy and joint replacement].

G Bergmann, M O Heller, C Perka, 2007, Der Orthopade.

[Loads acting on orthopaedic implants. Measurements and practical applications].

A Rohlmann, G Bergmann, F Graichen, 2007, Der Orthopade.

Implantable 9-Channel Telemetry System for In Vivo Load Measurements With Orthopedic Implants

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2007, IEEE Transactions on Biomedical Engineering.

Musculoskeletal loading database: loading conditions of the proximal femur

G. N. Duda *, M. O. Heller, G. Bergmann, 2005 .

Determination of muscle loading at the hip joint for use in pre-clinical testing.

G Bergmann, M O Heller, L Claes, 2005, Journal of biomechanics.

Direct comparison of calculated hip joint contact forces with those measured using instrumented implants. An evaluation of a three-dimensional mathematical model of the lower limb.

G Bergmann, F Graichen, J P Paul, 2003, Journal of biomechanics.

Averaging of Strongly Varying Signals - Mittelung stark variierender Signale

Georg Bergmann, H. Ruder, R. Gandini, 2001 .

Influence of shoes and heel strike on the loading of the hip joint.

A Rohlmann, G Bergmann, F Graichen, 1995, Journal of biomechanics.

Evaluation of ischial weight-bearing orthoses, based on in-vivo hip joint force measurements.

A Rohlmann, G Bergmann, F Graichen, 1994, Clinical biomechanics.

Four-channel telemetry system for in vivo measurement of hip joint forces.

G Bergmann, F Graichen, G. Bergmann, 1991, Journal of biomedical engineering.

Multichannel strain gauge telemetry for orthopaedic implants.

A Rohlmann, G Bergmann, F Graichen, 1988, Journal of biomechanics.

Hip Joint Forces During Load Carrying

A Rohlmann, G Bergmann, F Graichen, 1997, Clinical orthopaedics and related research.

Vitamin E stabilised polyethylene for total knee arthroplasty evaluated under highly demanding activities wear simulation.

G. Bergmann, I. Kutzner, C. Schilling, 2017, Acta biomaterialia.

Influence of ligament stiffness on the mechanical behavior of a functional spinal unit.

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2004, Journal of biomechanics.

Analysis of Simulated Single Ligament Transection on the Mechanical Behaviour of a Lumbar Functional Spinal Unit / Rechnerische Analyse des Einflusses der Bänder auf das mechanische Verhalten eines Bewegungssegments der Lendenwirbelsäule

G Bergmann, G. Bergmann, A. Rohlmann, 2004, Biomedizinische Technik. Biomedical engineering.

Monitoring the load on a telemeterised vertebral body replacement for a period of up to 65 months

G. Bergmann, F. Graichen, A. Rohlmann, 2013, European Spine Journal.

Material properties of femoral cancellous bone in axial loading

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 1980, Archives of orthopaedic and traumatic surgery.

Effect of different surgical strategies on screw forces after correction of scoliosis with a VDS implant

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2006, European Spine Journal.

Braces do not reduce loads on internal spinal fixation devices.

G. Bergmann, F. Graichen, A. Rohlmann, 1999, Clinical biomechanics.

Validation of the Delft Shoulder and Elbow Model using in-vivo glenohumeral joint contact forces.

G Bergmann, F Graichen, F C T van der Helm, 2010, Journal of biomechanics.

CR TKA UHMWPE Wear Tested after Artificial Aging of the Vitamin E Treated Gliding Component by Simulating Daily Patient Activities

G. Bergmann, I. Kutzner, T. Grupp, 2014, BioMed research international.

Optimised in vitro applicable loads for the simulation of lateral bending in the lumbar spine.

G. Bergmann, A. Rohlmann, M. Dreischarf, 2012, Medical engineering & physics.

Spinal loads after osteoporotic vertebral fractures treated by vertebroplasty or kyphoplasty

G. Bergmann, A. Rohlmann, T. Zander, 2006, European Spine Journal.

Is It Possible to Simulate Physiologic Loading Conditions by Applying Pure Moments?: A Comparison of In Vivo and In Vitro Load Components in an Internal Fixator

A Rohlmann, G Bergmann, F Graichen, 2001, Spine.

In vitro load measurement using an instrumented spinal fixation device.

G. Bergmann, F. Graichen, A. Rohlmann, 1996, Medical engineering & physics.

Clamping stiffness and its influence on load distribution between paired internal spinal fixation devices.

G. Bergmann, A. Rohlmann, J. Calisse, 1996, Journal of spinal disorders.

Comparison of intradiscal pressures and spinal fixator loads for different body positions and exercises

A. Rohlmann, G. Bergmann, F. Graichen, 2001, Ergonomics.

Comparison of loads on internal spinal fixation devices measured in vitro and in vivo.

A Rohlmann, G Bergmann, F Graichen, 1997, Medical engineering & physics.

Effect of an orthosis on the loads acting on a vertebral body replacement.

G. Bergmann, F. Graichen, A. Rohlmann, 2013, Clinical biomechanics.

Monitoring In Vivo Implant Loads With a Telemeterized Internal Spinal Fixation Device

A Rohlmann, G Bergmann, F Graichen, 2000, Spine.

Methods for Avoiding or Reducing High Spinal Loads in Everyday Life

G. Bergmann, A. Rohlmann, 2014 .

Spinal Loads during Cycling on an Ergometer

G. Bergmann, F. Graichen, A. Rohlmann, 2014, PloS one.

[The biomechanics of kyphosis].

G. Bergmann, A. Rohlmann, C. Klöckner, 2001, Der Orthopade.

Effect of an internal fixator and a bone graft on intersegmental spinal motion and intradiscal pressure in the adjacent regions

G. Bergmann, F. Graichen, A. Rohlmann, 2001, European Spine Journal.

A non-optimized follower load path may cause considerable intervertebral rotations.

Antonius Rohlmann, Marcel Dreischarf, Georg Bergmann, 2010, Journal of biomechanics.

Effect of position and height of a mobile core type artificial disc on the biomechanical behaviour of the lumbar spine

G. Bergmann, A. Rohlmann, T. Zander, 2008, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Influence of load carrying on loads in internal spinal fixators.

A Rohlmann, G Bergmann, F Graichen, 2000, Journal of biomechanics.

Comparison of the mechanical behavior of the lumbar spine following mono- and bisegmental stabilization.

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2002, Clinical biomechanics.

Different Arm Positions and the Shape of the Thoracic Spine Can Explain Contradictory Results in the Literature About Spinal Loads for Sitting and Standing

Antonius Rohlmann, Marcel Dreischarf, Georg Bergmann, 2010, Spine.

Wirbelsäulenbelastung beim Sitzen auf einem Bürostuhl mit nach hinten kippbarer Rückenlehne / Loads Acting on the Spine when Seated on an Office Chair with a Tilting Back

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2002 .

Loads on internal spinal fixation devices

G. Bergmann, F. Graichen, A. Rohlmann, 1999, Der Orthopäde.

Loads on a Telemeterized Vertebral Body Replacement Measured in Two Patients

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2008, Spine.

Loads on a telemeterized vertebral body replacement measured in three patients within the first postoperative month.

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2008, Clinical biomechanics.

Activities of Everyday Life with High Spinal Loads

Antonius Rohlmann, Georg Bergmann, Hendrik Schmidt, 2014, PloS one.

Effect of Total Disc Replacement with ProDisc on Intersegmental Rotation of the Lumbar Spine

G. Bergmann, A. Rohlmann, T. Zander, 2005, Spine.

Internal spinal fixator stiffness has only a minor influence on stresses in the adjacent discs.

A Rohlmann, G Bergmann, J Calisse, 1999, Spine.

Influence of graded facetectomy and laminectomy on spinal biomechanics

A. Rohlmann, C. Klöckner, G. Bergmann, 2003, European Spine Journal.

ESB Clinical Biomechanics Award 2018: Muscle atrophy‐related increased joint loading after total hip arthroplasty and their postoperative change from 3 to 50 months

G. Bergmann, G. Duda, C. Perka, 2019, Clinical biomechanics.

The Load upon the Artifical Hip Joint During Cycling

G. Bergmann, F. Graichen, A. Rohlmann, 1990 .

Effects of stem design and material properties on stresses in hip endoprostheses.

A Rohlmann, U Mössner, G Bergmann, 1987, Journal of biomedical engineering.

Finite-element-analysis and experimental investigation in a femur with hip endoprosthesis.

A Rohlmann, U Mössner, G Bergmann, 1983, Journal of biomechanics.

A comprehensive assessment of the musculoskeletal system: The CAMS-Knee data set.

William R Taylor, Georg Bergmann, Philipp Damm, 2017, Journal of biomechanics.

Comparison of Two Methods for In Vivo Estimation of the Glenohumeral Joint Rotation Center (GH-JRC) of the Patients with Shoulder Hemiarthroplasty

Georg Bergmann, Frans C. T. van der Helm, Friedmar Graichen, 2011, PloS one.

Evaluation of 2D Biomechanical Models of the Knee of One-Leg Stand for Total Knee Arthroplasty Planning

G. Bergmann, J. Eschweiler, K. Radermacher, 2017 .

Mediolateral force distribution at the knee joint shifts across activities and is driven by tibiofemoral alignment

G Bergmann, A Bender, G. Bergmann, 2017, The bone & joint journal.

Influence of limb alignment on mediolateral loading in total knee replacement: in vivo measurements in five patients.

Georg Bergmann, Friedmar Graichen, Bernd Heinlein, 2012, The Journal of bone and joint surgery. American volume.

Averaging of strongly varying signals.

G Bergmann, H Ruder, G. Bergmann, 2001, Biomedizinische Technik. Biomedical engineering.

Finite Element Analysis of the Elbow After Joint Replacement

G. Bergmann, A. Rohlmann, 1989 .

[Mechanical properties of bonding between cancellous bone and polymethylmetacrylate. IV. Tensile fatigue strength (author's transl)].

G. Bergmann, A. Rohlmann, R. Kölbel, 1977, Archiv fur orthopadische und Unfall-Chirurgie.

Influence of radiation conditions on the wear behaviour of Vitamin E treated UHMWPE gliding components for total knee arthroplasty after extended artificial aging and simulated daily patient activities.

G. Bergmann, C. Schilling, T. Grupp, 2021, Journal of the mechanical behavior of biomedical materials.

Mechanical Properties of the Cement/Bone Bond

G. Bergmann, R. Kölbel, U. Boenick, 1976 .

Modulation of the Relationship Between External Knee Adduction Moments and Medial Joint Contact Forces Across Subjects and Activities

William R Taylor, Georg Bergmann, Markus O Heller, 2014, Arthritis & rheumatology.

Medial and lateral foot loading and its effect on knee joint loading.

G. Bergmann, I. Kutzner, A. Bender, 2015, Clinical biomechanics.

Knee Adduction Moment and Medial Contact Force – Facts about Their Correlation during Gait

Georg Bergmann, Markus O. Heller, Adam Trepczynski, 2013, PloS one.

Large sizes of vertebral body replacement do not reduce the contact pressure on adjacent vertebral bodies per se.

G. Bergmann, A. Rohlmann, T. Zander, 2009, Medical engineering & physics.

In vivo measurement of implant loads in a patient with a fractured vertebral body

A. Rohlmann, G. Bergmann, F. Graichen, 2004, European Spine Journal.

Comparison of the biomechanical effects of posterior and anterior spine-stabilizing implants

Antonius Rohlmann, G. Bergmann, A. Rohlmann, 2005, European Spine Journal.

The effect of valgus braces on medial compartment load of the knee joint - in vivo load measurements in three subjects.

Georg Bergmann, Jörn Dymke, Bernd Heinlein, 2011, Journal of biomechanics.

The effect of laterally wedged shoes on the loading of the medial knee compartment‐in vivo measurements with instrumented knee implants

Georg Bergmann, Philipp Damm, Friedmar Graichen, 2011, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Biomechanics: Basic and Applied Research

Georg Bergmann, A. Rohlmann, R. Kölbel, 1987 .

Placing a bone graft more posteriorly may reduce the risk of pedicle screw breakage: analysis of an unexpected case of pedicle screw breakage.

G. Bergmann, F. Graichen, A. Rohlmann, 1998, Journal of biomechanics.

Patient monitoring system for load measurement with spinal fixation devices.

A Rohlmann, G Bergmann, F Graichen, 1996, Medical engineering & physics.

Spinal loads during position changes.

G. Bergmann, F. Graichen, A. Rohlmann, 2012, Clinical biomechanics.

Measured loads on a vertebral body replacement during sitting.

Antonius Rohlmann, Marcel Dreischarf, Georg Bergmann, 2011, The spine journal : official journal of the North American Spine Society.

Loads on a spinal implant measured in vivo during whole-body vibration

Antonius Rohlmann, Georg Bergmann, Barbara Hinz, 2010, European Spine Journal.

An instrumented implant for vertebral body replacement that measures loads in the anterior spinal column.

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2007, Medical engineering & physics.

The influence of footwear on knee joint loading during walking--in vivo load measurements with instrumented knee implants.

Georg Bergmann, Friedmar Graichen, Jörn Dymke, 2013, Journal of biomechanics.

In vivo loads on a vertebral body replacement during different lifting techniques.

Antonius Rohlmann, Marcel Dreischarf, Georg Bergmann, 2016, Journal of biomechanics.

Biomechanical Considerations in the Design of a Semi-constrained Total Shoulder Replacement

G. Bergmann, A. Rohlmann, R. Kölbel, 1982 .

IN VIVO SHOULDER JOINT FORCES AT ISOLATED MOTIONS

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2008 .

A nonlinear finite element analysis of interface conditions in porous coated hip endoprostheses.

A Rohlmann, G Bergmann, W C Hayes, 1988, Journal of biomechanics.

Effect of bone graft characteristics on the mechanical behavior of the lumbar spine.

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2002, Journal of biomechanics.

Loads on an Internal Spinal Fixation Device Measured In Vivo

G. Bergmann, F. Graichen, A. Rohlmann, 2003 .

Comparison of in vivo measured loads in knee, hip and spinal implants during level walking.

G. Bergmann, A. Rohlmann, I. Kutzner, 2017, Journal of biomechanics.

IN VIVO MEASUREMENTS OF THE FRICTION MOMENT IN TOTAL HIP JOINT PROSTHESES DURING WALKING

Georg Bergmann, Philipp Damm, Robert Ackermann, 2012 .

Biomechanics and Pathomechanics of the Shoulder Joint with Reference to Prosthetic Joint Replacement

G. Bergmann, G. Bergmann, 1987 .

Realistic loads for testing hip implants.

G. Bergmann, F. Graichen, A. Rohlmann, 2010, Bio-medical materials and engineering.

First in vivo measurements of contact forces in the shoulder joint

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2006 .