A. Rohlmann

发表

Five month in vivo measurement of hip joint forces

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 1989 .

Hip contact forces and gait patterns from routine activities.

G. Bergmann, F. Graichen, A. Rohlmann, 2001, Journal of biomechanics.

Loading of the knee joint during activities of daily living measured in vivo in five subjects.

G. Bergmann, F. Graichen, A. Rohlmann, 2010, Journal of biomechanics.

ESB Clinical Biomechanics Award 2008: Complete data of total knee replacement loading for level walking and stair climbing measured in vivo with a follow-up of 6-10 months.

G. Bergmann, F. Graichen, A. Rohlmann, 2009, Clinical biomechanics.

Design, calibration and pre-clinical testing of an instrumented tibial tray.

G. Bergmann, F. Graichen, A. Rohlmann, 2007, Journal of biomechanics.

Computational biomechanics of a lumbar motion segment in pure and combined shear loads.

Antonius Rohlmann, Marcel Dreischarf, Aboulfazl Shirazi-Adl, 2013, Journal of biomechanics.

Spinal loads as influenced by external loads: a combined in vivo and in silico investigation.

G. Bergmann, A. Rohlmann, M. Dreischarf, 2015, Journal of biomechanics.

Applying a follower load delivers realistic results for simulating standing.

A Rohlmann, G Bergmann, G. Bergmann, 2009, Journal of biomechanics.

Loads on an internal spinal fixation device during walking.

A Rohlmann, G Bergmann, F Graichen, 1997, Journal of biomechanics.

Loads on an internal spinal fixation device during sitting.

A Rohlmann, G Bergmann, F Graichen, 2001, Journal of biomechanics.

Loads on an internal spinal fixation device during physical therapy.

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2002, Physical therapy.

In vivo measurements of the effect of whole body vibration on spinal loads

Antonius Rohlmann, Georg Bergmann, Philipp Damm, 2013, European Spine Journal.

Standardized Loads Acting in Knee Implants

G. Bergmann, F. Graichen, A. Rohlmann, 2014, PloS one.

Hip joint loading during walking and running, measured in two patients.

G. Bergmann, F. Graichen, A. Rohlmann, 1993, Journal of biomechanics.

Hip joint contact forces during stumbling

G. Bergmann, F. Graichen, A. Rohlmann, 2004, Langenbeck's Archives of Surgery.

Estimation of muscle forces in the lumbar spine during upper-body inclination.

G. Bergmann, A. Rohlmann, T. Zander, 2001, Clinical biomechanics.

Effect of a pedicle-screw-based motion preservation system on lumbar spine biomechanics: a probabilistic finite element study with subsequent sensitivity analysis.

G. Bergmann, A. Rohlmann, T. Zander, 2010, Journal of biomechanics.

What have we learned from finite element model studies of lumbar intervertebral discs in the past four decades?

A. Rohlmann, A. Shirazi-Adl, H. Schmidt, 2013, Journal of biomechanics.

Flexible non-fusion scoliosis correction systems reduce intervertebral rotation less than rigid implants and allow growth of the spine: a finite element analysis of different features of orthobiom™

G. Bergmann, A. Rohlmann, T. Zander, 2008, European Spine Journal.

In vivo gleno-humeral joint loads during forward flexion and abduction.

G. Bergmann, F. Graichen, A. Rohlmann, 2011, Journal of biomechanics.

In vivo measurement of shoulder joint loads during walking with crutches.

G. Bergmann, F. Graichen, A. Rohlmann, 2012, Clinical biomechanics.

Comparison of in vivo measured loads in knee, hip and spinal implants during level walking.

G. Bergmann, A. Rohlmann, I. Kutzner, 2017, Journal of biomechanics.

Comparison of the effects of bilateral posterior dynamic and rigid fixation devices on the loads in the lumbar spine: a finite element analysis

G. Bergmann, A. Rohlmann, T. Zander, 2007, European Spine Journal.

Finite-element-analysis and experimental investigation of stresses in a femur.

A Rohlmann, U Mössner, G Bergmann, 1982, Journal of biomedical engineering.

In vivo glenohumeral contact forces--measurements in the first patient 7 months postoperatively.

A Rohlmann, G Bergmann, F Graichen, 2007, Journal of biomechanics.

Loading of the knee joint during ergometer cycling: telemetric in vivo data.

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2012, The Journal of orthopaedic and sports physical therapy.

Optimal stiffness of a pedicle-screw-based motion preservation implant for the lumbar spine

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2012, European Spine Journal.

Hip endoprosthesis for in vivo measurement of joint force and temperature.

A Rohlmann, G Bergmann, F Graichen, 1999, Journal of biomechanics.

High-Tech Hip Implant for Wireless Temperature Measurements In Vivo

Antonius Rohlmann, Georg Bergmann, Philipp Damm, 2012, PloS one.

Frictional heating of total hip implants. Part 2: finite element study.

N Verdonschot, A Rohlmann, G Bergmann, 2001, Journal of biomechanics.

Frictional heating of total hip implants. Part 1: measurements in patients.

N Verdonschot, A Rohlmann, G Bergmann, 2001, Journal of biomechanics.

Is staircase walking a risk for the fixation of hip implants?

A Rohlmann, G Bergmann, F Graichen, 1995, Journal of biomechanics.

A comparison of hip joint forces in sheep, dog and man.

A Rohlmann, G Bergmann, J Siraky, 1984, Journal of biomechanics.

Hip joint forces in sheep.

A Rohlmann, G Bergmann, F Graichen, 1999, Journal of biomechanics.

Long term animal test with instrumented hip implants

G. Bergmann, F. Graichen, A. Rohlmann, 1987 .

A probabilistic finite element analysis of the stresses in the augmented vertebral body after vertebroplasty

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2010, European Spine Journal.

Effect of an artificial disc on lumbar spine biomechanics: a probabilistic finite element study

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2008, European Spine Journal.

In vivo implant forces acting on a vertebral body replacement during upper body flexion.

Antonius Rohlmann, Marcel Dreischarf, Georg Bergmann, 2015, Journal of biomechanics.

Determination of trunk muscle forces for flexion and extension by using a validated finite element model of the lumbar spine and measured in vivo data.

Antonius Rohlmann, Georg Bergmann, Hans-Joachim Wilke, 2006, Journal of biomechanics.

Is it possible to estimate the compressive force in the lumbar spine from intradiscal pressure measurements? A finite element evaluation.

Antonius Rohlmann, Marcel Dreischarf, Rui Zhu, 2013, Medical engineering & physics.

Forces on the spine

A. Rohlmann, H. Wilke, 2012 .

Which postures are most suitable in assessing spinal fusion using radiostereometric analysis?

A. Rohlmann, T. Zander, H. Boustani, 2012, Clinical biomechanics.

Optimised loads for the simulation of axial rotation in the lumbar spine.

Antonius Rohlmann, Marcel Dreischarf, Georg Bergmann, 2011, Journal of biomechanics.

Pedicle-screw-based dynamic implants may increase posterior intervertebral disc bulging during flexion

A. Rohlmann, A. Disch, T. Zander, 2011, Biomedizinische Technik. Biomedical engineering.

Effect of multilevel lumbar disc arthroplasty on spine kinematics and facet joint loads in flexion and extension: a finite element analysis

Antonius Rohlmann, Fabio Galbusera, Hendrik Schmidt, 2012, European Spine Journal.

Diurnal variations in intervertebral disc height affect spine flexibility, intradiscal pressure and contact compressive forces in the facet joints

G. Bergmann, A. Rohlmann, T. Zander, 2010, Computer methods in biomechanics and biomedical engineering.

Influence of different artificial disc kinematics on spine biomechanics.

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2009, Clinical biomechanics.

Realistic loading conditions for upper body bending.

A Rohlmann, G Bergmann, G. Bergmann, 2009, Journal of biomechanics.

Effects of fusion-bone stiffness on the mechanical behavior of the lumbar spine after vertebral body replacement.

G. Bergmann, A. Rohlmann, T. Zander, 2006, Clinical biomechanics.

Analysis of the influence of disc degeneration on the mechanical behaviour of a lumbar motion segment using the finite element method.

Antonius Rohlmann, Georg Bergmann, Hendrik Schmidt, 2006, Journal of biomechanics.

Effect of a posterior dynamic implant adjacent to a rigid spinal fixator.

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2006, Clinical biomechanics.

A spinal fixation device for in vivo load measurement.

A Rohlmann, G Bergmann, F Graichen, 1994, Journal of biomechanics.

Influence of Muscle Forces on Loads in Internal Spinal Fixation Devices

A Rohlmann, G Bergmann, F Graichen, 1998, Spine.

Estimation of trunk muscle forces using the finite element method and in vivo loads measured by telemeterized internal spinal fixation devices.

A Rohlmann, G Bergmann, J Calisse, 1999, Journal of biomechanics.

Loads on internal spinal fixators measured in different body positions

A. Rohlmann, G. Bergmann, F. Graichen, 1999, European Spine Journal.

Changes in the loads on an internal spinal fixator after iliac-crest autograft.

G. Bergmann, F. Graichen, A. Rohlmann, 2000, The Journal of bone and joint surgery. British volume.

Influence of a Follower Load on Intradiscal Pressure and Intersegmental Rotation of the Lumbar Spine

L Claes, A Rohlmann, G Bergmann, 2001, Spine.

ISSLS Prize Winner: A Novel Approach to Determine Trunk Muscle Forces During Flexion and Extension: A Comparison of Data From an In Vitro Experiment and In Vivo Measurements

L Claes, A Rohlmann, G Bergmann, 2003, Spine.

Influence of a screw with a hinge on the pull-out force at the cranial end vertebra in ventral derotation spondylodesis (VDS)

G. Bergmann, A. Rohlmann, C. Klöckner, 2003, Archives of Orthopaedic and Trauma Surgery.

Effect of ligament stiffness on spinal loads and muscle forces in flexed positions

A. Rohlmann, Kap-Soo Han, Yoon-Hyuk Kim, 2012 .

The effect of design parameters of interspinous implants on kinematics and load bearing: an in vitro study

A. Rohlmann, M. Pfeiffer, W. Blömer, 2014, European Spine Journal.

Velocity of Lordosis Angle during Spinal Flexion and Extension

A. Rohlmann, Daniel Weinland, W. Taylor, 2012, PloS one.

Material properties of femoral cancellous bone in axial loading

G. Bergmann, A. Rohlmann, R. Kölbel, 2004, Archives of orthopaedic and traumatic surgery.

Influence of porous coating thickness and elastic modulus on stress distributions in hip prostheses

A. Rohlmann, W. Hayes, E. Cheal, 1987 .

Comparison of eight published static finite element models of the intact lumbar spine: predictive power of models improves when combined together.

A Rohlmann, J. P. Little, V K Goel, 2014, Journal of biomechanics.

Free vascularized bone transplantation in the extremities

A. Rohlmann, A. Eisenschenk, M. Lautenbach, 1998, Der Orthopäde.

Realistic loads for testing hip implants.

G Bergmann, F Graichen, A Rohlmann, 2010, Bio-medical materials and engineering.

Total hip joint prosthesis for in vivo measurement of forces and moments.

Antonius Rohlmann, Georg Bergmann, Philipp Damm, 2010, Medical engineering & physics.

An instrumented implant for in vivo measurement of contact forces and contact moments in the shoulder joint.

A Rohlmann, G Bergmann, F Graichen, 2009, Medical engineering & physics.

In vivo measurement of shoulder joint loads during activities of daily living.

A. Rohlmann, A. Bender, P. Westerhoff, 2009, Journal of biomechanics.

Design and calibration of load sensing orthopaedic implants.

A Rohlmann, G Bergmann, F Graichen, 2008, Journal of biomechanical engineering.

[Loads acting on orthopaedic implants. Measurements and practical applications].

A Rohlmann, G Bergmann, F Graichen, 2007, Der Orthopade.

Implantable 9-Channel Telemetry System for In Vivo Load Measurements With Orthopedic Implants

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2007, IEEE Transactions on Biomedical Engineering.

Influence of shoes and heel strike on the loading of the hip joint.

A Rohlmann, G Bergmann, F Graichen, 1995, Journal of biomechanics.

Evaluation of ischial weight-bearing orthoses, based on in-vivo hip joint force measurements.

A Rohlmann, G Bergmann, F Graichen, 1994, Clinical biomechanics.

Multichannel strain gauge telemetry for orthopaedic implants.

A Rohlmann, G Bergmann, F Graichen, 1988, Journal of biomechanics.

Hip Joint Forces During Load Carrying

A Rohlmann, G Bergmann, F Graichen, 1997, Clinical orthopaedics and related research.

Antonius Rohlmann, Marcel Dreischarf, Hendrik Schmidt, 2014, PloS one.

Estimation of loads on human lumbar spine: A review of in vivo and computational model studies.

Antonius Rohlmann, Marcel Dreischarf, Aboulfazl Shirazi-Adl, 2016, Journal of biomechanics.

Lumbar spinal loads vary with body height and weight.

William R Taylor, Antonius Rohlmann, A. Rohlmann, 2013, Medical engineering & physics.

Effect of ligament stiffness on spinal loads and muscle forces in flexed positions

A. Rohlmann, Kap-Soo Han, Yoon-Hyuk Kim, 2012, International Journal of Precision Engineering and Manufacturing.

An enhanced and validated generic thoraco-lumbar spine model for prediction of muscle forces.

Antonius Rohlmann, William R. Taylor, A. Rohlmann, 2012, Medical engineering & physics.

Spinal muscles can create compressive follower loads in the lumbar spine in a neutral standing posture.

Antonius Rohlmann, Kap-Soo Han, Seok-Jo Yang, 2011, Medical engineering & physics.

Influence of ligament stiffness on the mechanical behavior of a functional spinal unit.

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2004, Journal of biomechanics.

Monitoring the load on a telemeterised vertebral body replacement for a period of up to 65 months

G. Bergmann, F. Graichen, A. Rohlmann, 2013, European Spine Journal.

Considerations when loading spinal finite element models with predicted muscle forces from inverse static analyses.

A. Rohlmann, R. Zhu, G. Duda, 2013, Journal of biomechanics.

Which Radiographic Parameters Are Linked to Failure of a Dynamic Spinal Implant?

A. Rohlmann, P. Strube, M. Putzier, 2012, Clinical orthopaedics and related research.

Material properties of femoral cancellous bone in axial loading

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 1980, Archives of orthopaedic and traumatic surgery.

Effect of different surgical strategies on screw forces after correction of scoliosis with a VDS implant

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2006, European Spine Journal.

The risk of disc prolapses with complex loading in different degrees of disc degeneration - a finite element analysis.

Lutz Claes, Antonius Rohlmann, Hendrik Schmidt, 2007, Clinical biomechanics.

Braces do not reduce loads on internal spinal fixation devices.

G. Bergmann, F. Graichen, A. Rohlmann, 1999, Clinical biomechanics.

[Stabilization of the osteoporotic spine from a biomechanical viewpoint].

A. Rohlmann, C. Heyde, R. Kayser, 2010, Der Orthopade.

Optimised in vitro applicable loads for the simulation of lateral bending in the lumbar spine.

G. Bergmann, A. Rohlmann, M. Dreischarf, 2012, Medical engineering & physics.

Spinal loads after osteoporotic vertebral fractures treated by vertebroplasty or kyphoplasty

G. Bergmann, A. Rohlmann, T. Zander, 2006, European Spine Journal.

Biomechanical behavior of MRI-signal-inducing bone cements after vertebroplasty in osteoporotic vertebral bodies: An experimental cadaver study.

A. Rohlmann, H. Bail, F. Wichlas, 2014, Clinical biomechanics.

In vitro load measurement using an instrumented spinal fixation device.

G. Bergmann, F. Graichen, A. Rohlmann, 1996, Medical engineering & physics.

Clamping stiffness and its influence on load distribution between paired internal spinal fixation devices.

G. Bergmann, A. Rohlmann, J. Calisse, 1996, Journal of spinal disorders.

Comparison of intradiscal pressures and spinal fixator loads for different body positions and exercises

A. Rohlmann, G. Bergmann, F. Graichen, 2001, Ergonomics.

Comparison of loads on internal spinal fixation devices measured in vitro and in vivo.

A Rohlmann, G Bergmann, F Graichen, 1997, Medical engineering & physics.

Effect of an orthosis on the loads acting on a vertebral body replacement.

G. Bergmann, F. Graichen, A. Rohlmann, 2013, Clinical biomechanics.

Monitoring In Vivo Implant Loads With a Telemeterized Internal Spinal Fixation Device

A Rohlmann, G Bergmann, F Graichen, 2000, Spine.

Methods for Avoiding or Reducing High Spinal Loads in Everyday Life

G. Bergmann, A. Rohlmann, 2014 .

Comparison of four reconstruction methods after total sacrectomy: a finite element study.

A. Rohlmann, Liming Cheng, R. Zhu, 2012, Clinical biomechanics.

Spinal Loads during Cycling on an Ergometer

G. Bergmann, F. Graichen, A. Rohlmann, 2014, PloS one.

Application of a new calibration method for a three-dimensional finite element model of a human lumbar annulus fibrosus.

Lutz Claes, Antonius Rohlmann, Ulrich Simon, 2006, Clinical biomechanics.

[The biomechanics of kyphosis].

G. Bergmann, A. Rohlmann, C. Klöckner, 2001, Der Orthopade.

Effect of an internal fixator and a bone graft on intersegmental spinal motion and intradiscal pressure in the adjacent regions

G. Bergmann, F. Graichen, A. Rohlmann, 2001, European Spine Journal.

A non-optimized follower load path may cause considerable intervertebral rotations.

Antonius Rohlmann, Marcel Dreischarf, Georg Bergmann, 2010, Journal of biomechanics.

Effect of position and height of a mobile core type artificial disc on the biomechanical behaviour of the lumbar spine

G. Bergmann, A. Rohlmann, T. Zander, 2008, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Influence of load carrying on loads in internal spinal fixators.

A Rohlmann, G Bergmann, F Graichen, 2000, Journal of biomechanics.

Comparison of the mechanical behavior of the lumbar spine following mono- and bisegmental stabilization.

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2002, Clinical biomechanics.

The effect of design parameters of dynamic pedicle screw systems on kinematics and load bearing: an in vitro study

A. Rohlmann, G. Duda, W. Blömer, 2011, European Spine Journal.

Different Arm Positions and the Shape of the Thoracic Spine Can Explain Contradictory Results in the Literature About Spinal Loads for Sitting and Standing

Antonius Rohlmann, Marcel Dreischarf, Georg Bergmann, 2010, Spine.

Loads on internal spinal fixation devices

G. Bergmann, F. Graichen, A. Rohlmann, 1999, Der Orthopäde.

Loads on a Telemeterized Vertebral Body Replacement Measured in Two Patients

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2008, Spine.

Loads on a telemeterized vertebral body replacement measured in three patients within the first postoperative month.

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2008, Clinical biomechanics.

Activities of Everyday Life with High Spinal Loads

Antonius Rohlmann, Georg Bergmann, Hendrik Schmidt, 2014, PloS one.

Discrepancies in anthropometric parameters between different models affect intervertebral rotations when loading finite element models with muscle forces from inverse static analyses

Antonius Rohlmann, Rui Zhu, A. Rohlmann, 2014, Biomedizinische Technik. Biomedical engineering.

Effect of Total Disc Replacement with ProDisc on Intersegmental Rotation of the Lumbar Spine

G. Bergmann, A. Rohlmann, T. Zander, 2005, Spine.

Prospective quantitative assessment of spinal range of motion before and after minimally invasive surgical treatment of vertebral body fractures

A. Rohlmann, K. Schaser, A. Disch, 2014, Archives of Orthopaedic and Trauma Surgery.

Internal spinal fixator stiffness has only a minor influence on stresses in the adjacent discs.

A Rohlmann, G Bergmann, J Calisse, 1999, Spine.

Influence of graded facetectomy and laminectomy on spinal biomechanics

A. Rohlmann, C. Klöckner, G. Bergmann, 2003, European Spine Journal.

Parameters influencing the outcome after total disc replacement at the lumbosacral junction. Part 1: misalignment of the vertebrae adjacent to a total disc replacement affects the facet joint and facet capsule forces in a probabilistic finite element analysis

A. Rohlmann, M. Dreischarf, H. Schmidt, 2013, European Spine Journal.

Comparative evaluation of a novel measurement tool to assess lumbar spine posture and range of motion

Antonius Rohlmann, Daniel Weinland, Georg N. Duda, 2012, European Spine Journal.

The Load upon the Artifical Hip Joint During Cycling

G. Bergmann, F. Graichen, A. Rohlmann, 1990 .

Effects of stem design and material properties on stresses in hip endoprostheses.

A Rohlmann, U Mössner, G Bergmann, 1987, Journal of biomedical engineering.

Finite-element-analysis and experimental investigation in a femur with hip endoprosthesis.

A Rohlmann, U Mössner, G Bergmann, 1983, Journal of biomechanics.

Spinal load changes during rotatory dynamic sitting.

A Rohlmann, M Lengsfeld, P Griss, 2000, Clinical biomechanics.

Parameters influencing the outcome after total disc replacement at the lumbosacral junction. Part 2: distraction and posterior translation lead to clinical failure after a mean follow-up of 5 years

A. Rohlmann, M. Dreischarf, H. Schmidt, 2013, European Spine Journal.

A novel system for the dynamic assessment of back shape.

William R Taylor, Antonius Rohlmann, Tobias Consmüller, 2010, Medical engineering & physics.

Automatic distinction of upper body motions in the main anatomical planes.

William R Taylor, Antonius Rohlmann, Georg N Duda, 2014, Medical engineering & physics.

Finite Element Analysis of the Elbow After Joint Replacement

G. Bergmann, A. Rohlmann, 1989 .

[Mechanical properties of bonding between cancellous bone and polymethylmetacrylate. IV. Tensile fatigue strength (author's transl)].

G. Bergmann, A. Rohlmann, R. Kölbel, 1977, Archiv fur orthopadische und Unfall-Chirurgie.

Large sizes of vertebral body replacement do not reduce the contact pressure on adjacent vertebral bodies per se.

G. Bergmann, A. Rohlmann, T. Zander, 2009, Medical engineering & physics.

In vivo measurement of implant loads in a patient with a fractured vertebral body

A. Rohlmann, G. Bergmann, F. Graichen, 2004, European Spine Journal.

Comparison of the biomechanical effects of posterior and anterior spine-stabilizing implants

Antonius Rohlmann, G. Bergmann, A. Rohlmann, 2005, European Spine Journal.

Is It Possible to Simulate Physiologic Loading Conditions by Applying Pure Moments?: A Comparison of In Vivo and In Vitro Load Components in an Internal Fixator

A Rohlmann, G Bergmann, F Graichen, 2001, Spine.

Biomechanics: Basic and Applied Research

Georg Bergmann, A. Rohlmann, R. Kölbel, 1987 .

Investigation of different cage designs and mechano-regulation algorithms in the lumbar interbody fusion process - a finite element analysis.

Antonius Rohlmann, Sara Checa, Hendrik Schmidt, 2014, Journal of biomechanics.

Placing a bone graft more posteriorly may reduce the risk of pedicle screw breakage: analysis of an unexpected case of pedicle screw breakage.

G. Bergmann, F. Graichen, A. Rohlmann, 1998, Journal of biomechanics.

Patient monitoring system for load measurement with spinal fixation devices.

A Rohlmann, G Bergmann, F Graichen, 1996, Medical engineering & physics.

Spinal loads during position changes.

G. Bergmann, F. Graichen, A. Rohlmann, 2012, Clinical biomechanics.

Measured loads on a vertebral body replacement during sitting.

Antonius Rohlmann, Marcel Dreischarf, Georg Bergmann, 2011, The spine journal : official journal of the North American Spine Society.

Loads on a spinal implant measured in vivo during whole-body vibration

Antonius Rohlmann, Georg Bergmann, Barbara Hinz, 2010, European Spine Journal.

An instrumented implant for vertebral body replacement that measures loads in the anterior spinal column.

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2007, Medical engineering & physics.

In vivo loads on a vertebral body replacement during different lifting techniques.

Antonius Rohlmann, Marcel Dreischarf, Georg Bergmann, 2016, Journal of biomechanics.

Biomechanical Considerations in the Design of a Semi-constrained Total Shoulder Replacement

G. Bergmann, A. Rohlmann, R. Kölbel, 1982 .

IN VIVO SHOULDER JOINT FORCES AT ISOLATED MOTIONS

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2008 .

A nonlinear finite element analysis of interface conditions in porous coated hip endoprostheses.

A Rohlmann, G Bergmann, W C Hayes, 1988, Journal of biomechanics.

Effect of bone graft characteristics on the mechanical behavior of the lumbar spine.

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2002, Journal of biomechanics.

Loads on an Internal Spinal Fixation Device Measured In Vivo

G. Bergmann, F. Graichen, A. Rohlmann, 2003 .

Estimation of loads on human lumbar spine: A review of in vivo and computational model studies.

A. Rohlmann, A. Shirazi-Adl, N. Arjmand, 2016, Journal of biomechanics.

Comparison of in vivo measured loads in knee, hip and spinal implants during level walking.

G. Bergmann, A. Rohlmann, I. Kutzner, 2017, Journal of biomechanics.

Realistic loads for testing hip implants.

G. Bergmann, F. Graichen, A. Rohlmann, 2010, Bio-medical materials and engineering.

First in vivo measurements of contact forces in the shoulder joint

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2006 .