I. Hutchings

发表

Tribology: Friction and Wear of Engineering Materials

I. Hutchings, 1992 .

A model for the friction of multiphase materials in abrasion

I. Hutchings, N. Axén, S. Jacobson, 1996 .

Transitions between two-body and three-body abrasive wear: influence of test conditions in the microscale abrasive wear test

I. Hutchings, R. Trezona, D. Allsopp, 1999 .

Development of high-throughput glass inkjet devices for pharmaceutical applications.

I. Hutchings, T. Ehtezazi, N. Dempster, 2014, Journal of pharmaceutical sciences.

The influence of corrosion on the erosion of aluminium by aqueous silica slurries

I. Hutchings, G. T. Burstein, Y. Li, 1995 .

Ductile-brittle transitions and wear maps for the erosion and abrasion of brittle materials

I. Hutchings, 1992 .

Numerical studies of the influence of the dynamic contact angle on a droplet impacting on a dry surface

I. Hutchings, K. Yokoi, D. Vadillo, 2009 .

Reduction of the sliding friction of metals by the application of longitudinal or transverse ultrasonic vibration

I. Hutchings, V. Kumar, 2004 .

Perspective: The Breakup of Liquid Jets and the Formation of Droplets

J. R. Castrejón-Pita, I. Hutchings, 2014 .

The shadowgraph imaging technique and its modern application to fluid jets and drops

J. R. Castrejón-Pita, I. Hutchings, G. Martin, 2011 .

The ricochet of spheres and cylinders from the surface of water

I. Hutchings, 1976 .

Particle erosion of ductile metals: A mechanism of material removal

I. Hutchings, R. Winter, 1974 .

Inkjet printing - the physics of manipulating liquid jets and drops

I. Hutchings, G. Martin, S. Hoath, 2008 .

Friction and Wear

I. Hutchings, É. Santner, M. Gee, 2011 .

General approach and procedures for erosive wear testing.

I. Hutchings, M. Gee, 2002 .

The rôle of particle properties in the erosion of brittle materials

I. Hutchings, P. Shipway, 1996 .

Adult rat retinal ganglion cells and glia can be printed by piezoelectric inkjet printing

I. Hutchings, K. Martin, W. Hsiao, 2013, Biofabrication.

Effect of Particulate Contamination in Grease-Lubricated Hybrid Rolling Bearings

I. Hutchings, L. Kahlman, 1999 .

Links Between Ink Rheology, Drop-on-Demand Jet Formation, and Printability

Graham D. Martin, Stephen D. Hoath, Ian M. Hutchings, 2009 .

How PEDOT:PSS solutions produce satellite-free inkjets

I. Hutchings, S. Hoath, W. Hsiao, 2012 .

A simple criterion for filament break-up in drop-on-demand inkjet printing

Stephen D. Hoath, Ian M. Hutchings, Sungjune Jung, 2013 .

High Speed Imaging and Analysis of Jet and Drop Formation

I. Hutchings, G. Martin, S. Hoath, 2006, NIP & Digital Fabrication Conference.

Plethora of transitions during breakup of liquid filaments

J. R. Castrejón-Pita, I. Hutchings, A. A. Castrejón-Pita, 2015, Proceedings of the National Academy of Sciences.

A simple large-scale droplet generator for studies of inkjet printing.

J. R. Castrejón-Pita, I. Hutchings, G. Martin, 2008, The Review of scientific instruments.

Jetting behavior of polymer solutions in drop-on-demand inkjet printing

Stephen D. Hoath, Ian M. Hutchings, Oliver G. Harlen, 2012 .

Drop speeds from drop-on-demand ink-jet print heads

I. Hutchings, G. Martin, S. Hoath, 2013 .

Inkjet printing of weakly elastic polymer solutions

I. Hutchings, G. Martin, S. Hoath, 2014 .

Fracture of brittle spheres under compression and impact loading. I. Elastic stress distributions

Ian M. Hutchings, P. H. Shipway, I. Hutchings, 1993 .

Effects of die surface patterning on lubrication in strip drawing

Ian M. Hutchings, H. L. Costa, I. Hutchings, 2009 .

Hydrodynamic lubrication of textured steel surfaces under reciprocating sliding conditions

Ian M. Hutchings, H. L. Costa, I. Hutchings, 2007 .

Experimental Study of the Influence of Nozzle Defects on Drop-on-Demand Ink Jets

I. Hutchings, G. Martin, Castrejón-Pita, 2010 .

Holographic Measurement of Drop-on-Demand Drops in Flight

I. Hutchings, G. Martin, Castrejón-Pita, 2011 .

Introduction to inkjet printing for manufacturing

Graham D. Martin, Ian M. Hutchings, I. Hutchings, 2012 .

Velocity Profiles in a Cylindrical Liquid Jet by Reconstructed Velocimetry

J. R. Castrejón-Pita, I. Hutchings, S. Hoath, 2012 .

Time-Resolved Particle Image Velocimetry within the Nozzle of a Drop-on-Demand Printhead

I. Hutchings, A. A. Castrejón-Pita, S. Hoath, 2012 .

Breakup of liquid filaments.

J. R. Castrejón-Pita, I. Hutchings, A. A. Castrejón-Pita, 2012, Physical review letters.

Printing stable liquid tracks on a surface with finite receding contact angle.

Wen-Kai Hsiao, I. Hutchings, G. Martin, 2014, Langmuir : the ACS journal of surfaces and colloids.

A full factorial investigation of the erosion durability of automotive clearcoats

Ian M. Hutchings, Mj Pickles, R. I. Trezona, 2000 .

Erosion of unfilled elastomers by solid particle impact

I. Hutchings, D. W. T. Deuchar, A. Muhr, 1987 .

Improved method of testing durability and adhesion of paints and other coatings

I. Hutchings, P. Shipway, 1993 .

Influence of nozzle roughness on conditions in a gas-blast erosion rig

I. Hutchings, P. Shipway, 1993 .

A new technique for determining the micro-scale abrasion resistance of automotive clearcoats

I. Hutchings, R. Trezona, A. Ramamurthy, 1997 .

Effect of weathering on the mechanical properties of automotive clearcoats

I. Hutchings, R. Trezona, A. Weakley, 2000 .

Resistance of paint coatings to multiple solid particle impact: effect of coating thickness and substrate material

I. Hutchings, R. Trezona, 2001 .

Printed photonic arrays from self-organized chiral nematic liquid crystals

I. Hutchings, P. Hands, T. Wilkinson, 2012 .

Droplet impact onto moving liquids

J. R. Castrejón-Pita, I. Hutchings, A. A. Castrejón-Pita, 2016, Journal of Fluid Mechanics.

Some innovative surface texturing techniques for tribological purposes

I. Hutchings, H. Costa, I. Hutchings, 2015 .

Transitions in the erosive wear behaviour of a glass ceramic

I. Hutchings, A. Sparks, 1991 .

Deformation of metal surfaces by the oblique impact of square plates

I. Hutchings, 1977 .

Yielding of engineering polymers at strain rates of up to 500 s−1

I. Hutchings, S. Kukureka, 1984 .

Tribological and mechanical properties of carbon nitride films deposited by ionised magnetron sputtering

I. Hutchings, Z. Barber, Y. Kusano, 2000 .

The role of adiabatic shear in solid particle erosion

I. Hutchings, R. Winter, 1975 .

Sliding wear behaviour of laser clad coatings based upon a nickel-based self-fluxing alloy co-deposited with conventional and nanostructured tungsten carbide–cobalt hardmetals

Jiajun Liu, I. Hutchings, P. Shipway, 2005 .

A comparative study of the slurry erosion and free-fall particle erosion of aluminium

Ian M. Hutchings, I. Hutchings, G. T. Burstein, 1991 .

Laboratory simulation of the industrial ceramic tile polishing process

M. J. Ibáñez, I. Hutchings, K. Adachi, 2004 .

Effect of deposition conditions on the characteristics of reactively sputtered titanium nitride films

I. Hutchings, N. Axén, R. Somekh, 1997 .

Lubricants and lubrication

I. Hutchings, P. Shipway, 2017 .

1 Introductory Remarks

I. Hutchings, G. Martin, S. Hoath, 2016 .

The role of viscoelasticity in drop impact and spreading for inkjet printing of polymer solution on a wettable surface

I. Hutchings, S. Hoath, Sungjune Jung, 2013 .

The structure of adiabatic shear bands in a titanium alloy

I. Hutchings, S. Timothy, 1985 .

I. Hutchings, E. Hinch, A. A. Castrejón-Pita, 2012, Physical review. E, Statistical, nonlinear, and soft matter physics.

Duncan Dowson's editorship of Wear

I. Hutchings, 2021, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology.

Amorphous Carbon-Silicon Alloys Prepared by a High Plasma Density Source

I. Hutchings, J. Robertson, W. Milne, 1999 .

Electrochemically induced annealing of stainless-steel surfaces

I. Hutchings, G. T. Burstein, K. Sasaki, 2000, Nature.

Erosion resistance and adhesion of composite metal/ceramic coatings produced by plasma spraying

I. Hutchings, T. Clyne, D. Ramm, 1993 .

Properties of amorphous carbon-silicon alloys deposited by a high plasma density source

I. Hutchings, J. Robertson, W. Milne, 2001 .

Surface Deformation Behaviour of Tic and Tin Coated Steels: 1 Indentation Response

I. Hutchings, T. Page, J. Knight, 1989 .

Laboratory characterisation of the wear behaviour of PVD-coated tool steels and correlation with cutting tool performance

I. Hutchings, S. Bull, E. Doyle, 1996 .

Inkjet-printed laser arrays

I. Hutchings, P. Hands, T. Wilkinson, 2012 .

Lattice changes generated by electrochemically induced surface annealing of austenitic stainless steel

I. Hutchings, G. T. Burstein, K. Sasaki, 2003 .

Analysis and laboratory simulation of an industrial polishing process for porcelain ceramic tiles

Ian M. Hutchings, Koshi Adachi, M. J. Ibáñez, 2005 .

Jetted mixtures of particle suspensions and resins

I. Hutchings, S. Hoath, W. Hsiao, 2014 .

Properties of carbon nitride films deposited by magnetron sputtering

I. Hutchings, Y. Kusano, R. Somekh, 1998 .

The role of viscoelasticity in drop impact and spreading for inkjet printing of polymer solution on a wettable surface

I. Hutchings, S. Hoath, Sungjune Jung, 2012, Microfluidics and Nanofluidics.

Indentation Methods in Advanced Materials Research Introduction

Ian M. Hutchings, Michael V. Swain, Yang-Tse Cheng, 2009 .

PLASTIC COMPRESSION OF SPHERES

I. Hutchings, M. Chaudhri, P. Makin, 1984 .

Cold spray deposition of thermoplastic powder

I. Hutchings, Yanmeng Xu, 2006 .

Tribological properties of metal matrix composites

I. Hutchings, 1994 .

Investigation of surface treatments for galling protection of titanium alloys

Ian M. Hutchings, Urban Wiklund, I. Hutchings, 2001 .

NOVEL METHODS FOR CHARACTERIZING THE MECHANICAL DURABILITY OF AUTOMOBILE PAINT SYSTEMS

Ian M. Hutchings, A. C. Ramamurthy, J. W. Freese, 1998 .

EROSION-CORROSION OF MILD-STEEL IN A TEMPERATURE-GRADIENT

I. Hutchings, P. Rogers, J. Little, 1995 .

Ink-jet printing for the decoration of ceramic tiles: technology and opportunities

I. Hutchings, 2010 .

Ink-jet printing in micro-manufacturing: opportunities and limitations

I. Hutchings, 2009 .

Inkjet printing for pharmaceutics - A review of research and manufacturing.

Ronan Daly, Tomás S Harrington, Graham D Martin, 2015, International journal of pharmaceutics.

Erosion/Oxidation of Austenitic and Ferritic Alloys

I. Hutchings, J. Little, A. Ninham, 1990 .

Patterning of carbon nanotube structures by inkjet printing of catalyst

I. Hutchings, K. Koziol, S. W. Pattinson, 2012, Journal of Materials Science.

Tribology: friction and wear of engineering materials, 2nd edition

I. Hutchings, P. Shipway, 2017 .

Wear of particulate metal matrix composites

I. Hutchings, S. Bhattacharya, A. Alpas, 2018 .

Improving sliding and abrasive wear behaviour of cast A356 and wrought AA7075 aluminium alloys by plasma electrolytic oxidation

I. Hutchings, L. Ceschini, C. Martini, 2010 .

Theory and application of a micro-scale abrasive wear test

I. Hutchings, K. Rutherford, D. Petersen, 1997 .

Wear by particulates

Ian M. Hutchings, I. Hutchings, 1987 .

3.19 – Wear of Aluminum-based Composites

I. Hutchings, 2000 .

An optical method for assessing scratch damage in bulk materials and coatings

I. Hutchings, G. Parry, P. Wang, 2003 .

Abrasive wear behaviour of an Al2O3–Al co-continuous composite

I. Hutchings, V. Imbeni, M. Breslin, 1999 .

Wear of alumina fibre–aluminium metal matrix composites by two-body abrasion

Ian M. Hutchings, I. Hutchings, A. Wang, 1989 .

Scaling laws for particle velocity in the gas-blast erosion test

I. Hutchings, A. Stevenson, 1995 .

A MODEL FOR THE EROSION OF METALS BY SPHERICAL PARTICLES AT NORMAL INCIDENCE - eScholarship

Ian M. Hutchings, I. Hutchings, 1981 .

The effects of ball surface condition in the micro‐scale abrasive wear test

I. Hutchings, R. Trezona, D. Allsopp, 1998 .

Porcelain tile microstructure: Implications for polished tile properties

M. J. Ibáñez, I. Hutchings, E. Sánchez, 2006 .

Development of the erosion durability technique for thin coatings

I. Hutchings, K. Rutherford, 1996 .

New directions in tribology

Ian M. Hutchings, I. Hutchings, 1997 .

Abrasive wear resistance of plasma-sprayed tungsten carbide–cobalt coatings

I. Hutchings, H. Chen, 1998 .

Wear of hardfacing white cast irons by solid particle erosion

I. Hutchings, A. Stevenson, 1995 .

Wear resistance of amorphous alloys and related materials

I. Hutchings, A. L. Greer, K. Rutherford, 2002 .

WEAR OF ALUMINUM-ALUMINA METAL-MATRIX COMPOSITES BY ABRASION AND EROSION

I. Hutchings, A. Wang, 1990 .

Recent advances in the understanding of solid particle erosion.

I. Hutchings, 1980 .

Correlations between tangential force and damage mechanisms in the scratch testing of ceramics

I. Hutchings, N. Axén, L. Kahlman, 1997 .

The influence of substrate hardness on the response of TiN-coated steels to surface deformation

I. Hutchings, T. Page, J. Knight, 1989 .

Development of the dry sand/rubber wheel abrasion test

I. Hutchings, A. Stevenson, 1996 .

The influence of particle properties on the erosive wear of sintered boron-carbide

I. Hutchings, P. Shipway, 1991 .

Progress towards standardisation of ball cratering

Ian M. Hutchings, J. von Stebut, Mark Gee, 2003 .

A micro-abrasive wear test, with particular application to coated systems

I. Hutchings, K. Rutherford, 1996 .

Results from an interlaboratory exercise to validate the micro-scale abrasion test

Ian M. Hutchings, Mark Gee, A. J. Gant, 2005 .

Modelling the entrainment and motion of particles in a gap: Application to abrasive wear

I. Hutchings, Y. Kusano, 2003 .

Analysis of abrasive wear and friction behaviour of composites

I. Hutchings, N. Axén, 1996 .

Inkjet Technology for Digital Fabrication

Ian M. Hutchings, I. Hutchings, 2012 .

The contributions of David Tabor to the science of indentation hardness

I. Hutchings, 2009 .

Abrasive wear resistance of TiN/NbN multi-layers: measurement and neural network modelling

Ian M. Hutchings, I. Hutchings, C. Davies, 1996 .

Micro-scale abrasive wear testing of PVD coatings on curved substrates

I. Hutchings, K. Rutherford, 1996 .

Wear-resistant materials : into the next century

I. Hutchings, 1994 .

Micro-scale abrasive wear behaviour of HVOF sprayed and laser-remelted conventional and nanostructured WC-Co coatings

Jiajun Liu, I. Hutchings, P. Shipway, 2005 .

Contributions to Dynamic Behaviour of Materials Professor John Edwin Field, FRS 1936–2020

S. G. Goveas, J. M. Huntley, I. Hutchings, 2021, Journal of Dynamic Behavior of Materials.

The deterioration of bonded abrasive papers during the wear of metals

Ian M. Hutchings, I. Hutchings, A. P. Mercer, 1989 .

Influence of particle fracture in the high-stress and low-stress abrasive wear of steel

I. Hutchings, N. Dube, 1999 .

Abrasion processes in wear and manufacturing

Ian M. Hutchings, I. Hutchings, 2002 .

Initiation and growth of microfractures along adiabatic shear bands in Ti–6AI–4V

I. Hutchings, S. Timothy, 1985 .

Effect of processing parameters on the surface durability of steam-oxidized sintered iron

I. Hutchings, J. Mello, 2001 .

Surface durability of steam-oxidized sintered iron: effect of surface topography

I. Hutchings, J. D. Mello, 2001 .

Future, Opportunities and Challenges of Inkjet Technologies

Ian M. Hutchings, J. Rafael Castrejón-Pita, W. R. S. Baxter, 2013 .

Leonardo da Vinci's studies of friction

Ian M. Hutchings, I. Hutchings, 2016 .

Methods of data analysis for the micro-scale abrasion test on coated substrates

I. Hutchings, K. Acker, Y. Kusano, 2003 .

The impact of a soft metal sphere on a hard metal target II. Deformation of the target

I. Hutchings, S. Timothy, 1986 .

Thermal effects in the erosion of ductile metals

Ian M. Hutchings, Alan V. Levy, I. Hutchings, 1989 .

Design of a slurry erosion test rig

Ian M. Hutchings, I. Hutchings, G. T. Burstein, 1990 .

Abrasive and erosive wear tests for thin coatings: a unified approach

I. Hutchings, 1998 .

Influence of environmental composition and electrochemical potential on the slurry erosion-corrosion of aluminium

I. Hutchings, G. T. Burstein, Y. Li, 1995 .

On the morphology of thermochemically produced Fe2B/Fe interfaces

I. Hutchings, A. Ninham, 1986 .

Deposition of carbon nitride films by ionised magnetron sputtering

I. Hutchings, C. Christou, Z. Barber, 1999 .

Rotating wheel abrasive wear testing.

Ian M. Hutchings, Mark Gee, A. J. Gant, 2002 .

A method for optimizing the particle flux in erosion testing with a gas-blast apparatus

Ian M. Hutchings, P. H. Shipway, I. Hutchings, 1994 .

A critical study of the erosion of an aluminium alloy by solid spherical particles at normal impingement

Ian M. Hutchings, I. Hutchings, A. K. Cousens, 1983 .

Mechanical properties of amorphous carbon nitride films

I. Hutchings, N. Axén, R. Somekh, 1996 .

A New Method to Assess the Jetting Behavior of Drop-on-Demand Ink Jet Fluids

I. Hutchings, G. Martin, S. Hoath, 2011 .

Wear-mode mapping for the micro-scale abrasion test

Ian M. Hutchings, Koshi Adachi, I. Hutchings, 2003 .

Micro-scale abrasion and scratch response of PVD coatings at elevated temperatures

I. Hutchings, D. Allsopp, D.N Allsopp, 2001 .

Development of a maskless electrochemical texturing method

Ian M. Hutchings, H. L. Costa, I. Hutchings, 2009 .

Transitions, Threshold Effects and Erosion Maps

Ian M. Hutchings, I. Hutchings, 1992 .

Strain rate effects in microparticle impact

Ian M. Hutchings, I. Hutchings, 1977 .

Solid particle erosion studies using single angular particles

Ian M. Hutchings, I. Hutchings, R. Winter, 1974 .

Measurement of the elastic modulus of paperboard from the low-frequency vibration modes of rectangular plates

Ian M. Hutchings, Jim Woodhouse, J Sato, 2007 .

Determination of the Dynamic Elastic Properties of Paper and Paperboard from the Low-frequency Vibration Modes of Rectangular Plates

Ian M. Hutchings, Jun Sato, Jim Woodhouse, 2007 .

Incorporation of nitrogen in sputtered carbon films

I. Hutchings, N. Axén, G. Botton, 1996 .

Porcelain tile microstructure: implications for polishability

M. J. Ibáñez, I. Hutchings, E. Sánchez, 2006 .

Inkjet Technology for Digital Fabrication: Hutchings/Inkjet Technology for Digital Fabrication

Graham D. Martin, Ian M. Hutchings, I. Hutchings, 2012 .

Direct Writing Technology Advances and Developments

Ian M. Hutchings, Lin Li, K.K.B. Hon, 2008 .

Applications of Paper-Based Diagnostics

Ali K. Yetisen, Ian M. Hutchings, Fernando da Cruz Vasconcellos, 2015 .

Attrition of brittle spheres by fracture under compression and impact loading

Ian M. Hutchings, P. H. Shipway, I. Hutchings, 1993 .

Abrasive and erosive wear of metal-matrix composites

Ian M. Hutchings, I. Hutchings, 1991 .

Mechanisms of wear in powder technology

I. Hutchings, 1993 .

Mechanisms of wear in powder technology: A review

Ian M. Hutchings, I. Hutchings, 1993 .

Al-Y-Ni nanophase composites by devitrification - Microstructure, hardness and abrasive wear resistance

I. Hutchings, A. L. Greer, Z. Zhong, 1997 .

The influence of atmospheric composition on the abrasive wear of titanium and Ti-6Al-4V

I. Hutchings, A. Mercer, 1988 .

Further studies of the oblique impact of a hard sphere against a ductile solid

N. H. Macmillan, I. Hutchings, D. Rickerby, 1981 .

Solid particle erosion of metals: the removal of surface material by spherical projectiles

Ian M. Hutchings, I. Hutchings, J. Field, 1976, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

The Behaviour of Metals Under Ballistic Impact at Sub-Ordnance Velocities

I. Hutchings, 1983 .

Effect of particle concentration on erosion rate of mild steel bends in a pneumatic conveyor

Ian M. Hutchings, Mayur Patel, Michael S.A. Bradley, 2005 .

Prediction of the resistance of metals to erosion by solid particles

I. Hutchings, 1975 .

Experimental study of atomization patterns produced by the oblique collision of two viscoelastic liq

I. Hutchings, S. Hoath, Sungjune Jung, 2011 .

The mechanisms of erosion of unfilled elastomers by solid particle impact

Ian M. Hutchings, I. Hutchings, J. Arnold, 1990 .

High Rate Deposition of Ta-C:H Using an Electron Cyclotron Wave Resonance Plasma Source

I. Hutchings, J. Robertson, W. Milne, 1999 .

Estimation of yield stress in polymers at high strain-rates using G.I. Taylor's impact technique

I. Hutchings, I. M. Hutchings, 1978 .

7 – Surface engineering

I. Hutchings, 2017 .

Resistance of cast polyurethane elastomers to solid particle erosion

I. Hutchings, J. Li, 1990 .

Manufacturing at double the speed

J. Allwood, R. Roy, I. Hutchings, 2016 .

A note on Guillaume Amontons and the laws of friction

I. Hutchings, 2021, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology.

A computer model for particle velocity calculation in erosion testing

I. Hutchings, A. Ninham, 1983 .

Optimizing the primary particle size distributions of pressurized metered dose inhalers by using inkjet spray drying for targeting desired regions of the lungs

I. Hutchings, T. Ehtezazi, L. Seton, 2015, Drug development and industrial pharmacy.

Friction and Wear

I. Hutchings, É. Santner, M. Gee, 2011 .

Fracture of brittle spheres under compression and impact loading. II: Results for lead-glass and sapphire spheres

Ian M. Hutchings, P. H. Shipway, I. Hutchings, 1993 .

Inkjet Printing Process for Large Area Electronics

Graham D. Martin, Ian M. Hutchings, Sungjune Jung, 2015 .

The dynamics of the impact and coalescence of droplets on a solid surface.

I. Hutchings, K. Kubiak, J R Castrejón-Pita, 2011, Biomicrofluidics.

Monograph on the erosion of materials by solid particle impact

Ian M. Hutchings, I. Hutchings, 1983 .

Effect of deposition conditions on the chemical bonding in sputtered carbon nitride films

I. Hutchings, N. Axén, G. Botton, 1996 .

Energy absorbed by elastic waves during plastic impact

Ian M. Hutchings, I. Hutchings, 1979 .

A new method for measurement of particle abrasivity

I. Hutchings, D. Kelly, 2001 .

Jetting of complex fluids

Graham D. Martin, Ian M. Hutchings, Sungjune Jung, 2013 .

Effects of erodent recycling in solid particle erosion testing

I. Hutchings, A. Sparks, 1993 .

Flux rate effects in the erosive wear of elastomers

I. Hutchings, J. Arnold, I. M. Hutchings, 1989 .

The erosive wear of elastomers

I. Hutchings, J. Arnold, 1991 .

The impact and spreading of a small liquid drop on a non-porous substrate over an extended time scale

Ian M. Hutchings, Sungjune Jung, I. Hutchings, 2012 .

Ink Jet Printing for Direct Mask Deposition in Printed Circuit Board Fabrication

Graham D. Martin, Stephen D. Hoath, Ian M. Hutchings, 2009 .

The abrasive and erosive wear of polymeric paint films

I. Hutchings, R. Trezona, A. Ramamurthy, 1997 .

A simple small-bore laboratory gas-gun

I. Hutchings, I M Hutchings, R E Winter, 1975 .

Oscillations of aqueous PEDOT:PSS fluid droplets and the properties of complex fluids in drop-on-demand inkjet printing

I. Hutchings, C. Bain, G. Martin, 2015 .

Properties of PEDOT:PSS from Oscillating Drop Studies

I. Hutchings, C. Bain, G. Martin, 2014, NIP & Digital Fabrication Conference.

Erosion of short delta-alumina fibre aluminium metal matrix composites by solid particles

I. Hutchings, Ag Wang, 1990 .

Mechanisms of the Erosion of Metals by Solid Particles

I. Hutchings, 1979 .

The Role of Particle Motion in Abrasive and Erosive Wear

I. Hutchings, 2005 .

Mixing and internal dynamics of droplets impacting and coalescing on a solid surface.

I. Hutchings, A. A. Castrejón-Pita, K. Kubiak, 2013, Physical review. E, Statistical, nonlinear, and soft matter physics.

Influence of erodent particle shape on the erosion of mild steel.

I. Hutchings, A. Cousens, 1983 .

Effect of compaction pressure and powder grade on microstructure and hardness of steam oxidised sintered iron

I. Hutchings, R. Binder, J. D. de Mello, 2001 .

Atomization patterns produced by the oblique collision of two Newtonian liquid jets

I. Hutchings, G. Martin, S. Hoath, 2010 .

A model for the erosive wear of rubber at oblique impact angles

I. Hutchings, J. Arnold, 1992 .

Dependence of Material Hardness on Erosion by Solid Particle Impact

I. Hutchings, Y. Oka, 1990 .

INFLUENCE OF ADIABATIC SHEAR BANDS ON THE FATIGUE STRENGTH OF A TITANIUM ALLOY

I. Hutchings, S. Timothy, 1984 .

Adiabatic shear bands in a titanium-alloy resulting from ballistic impact at high and low-temperatures

I. Hutchings, S. Timothy, 1984 .

Sensitivity of wear rates in the micro-scale abrasion test to test conditions and material hardness

Ian M. Hutchings, Koshi Adachi, I. Hutchings, 2005 .

Comparison between weight loss of bends in a pneumatic conveyor and erosion rate obtained in a centrifugal erosion tester for the same materials

I. Hutchings, Mayur K. Patel, M. Bradley, 2005 .

Three-body abrasive wear testing of soft materials

I. Hutchings, R. Trezona, 1999 .

Measurement of coating durability by solid particle erosion

I. Hutchings, P. Shipway, 1995 .

Mechanisms of abrasive wear in a boronized alloy steel

I. Hutchings, A. Wang, 1988 .

Impact erosion processes

I. Hutchings, J. Field, 1984 .

The influence of atmospheric humidity on the abrasive wear of metals

I. Hutchings, A. Mercer, 1985 .

Behavior of ink-jet printed drops on a corona-treated polymeric film substrate

I. Hutchings, G. Martin, Wk Hsiao, 2011 .

A model to predict the life of pneumatic conveyor bends

Ian M. Hutchings, Mayur Patel, Michael S.A. Bradley, 2002 .

The Erosion-Corrosion of a Nitrocarburized Low Alloy Steel in a Simulated FBC Environment

I. Hutchings, P. Rogers, J. Little, 1990 .

The effects of irradiation and ageing on the abrasive wear resistance of ultra high molecular weight polyethylene

I. Hutchings, M. Choudhury, 1997 .

The effect of biological fluids on the response of DLC films to a novel erosion durability test

I. Hutchings, T. Clyne, M. Allen, 1996 .

Tribological behaviour of multi-layered PVD nitride coatings

I. Hutchings, V. Imbeni, E. Lanzoni, 2001 .

Wastage of low alloy steels in a fluidized bed environment

I. Hutchings, P. Rogers, J. Little, 1995 .

Microstructural characterization of surface layers formed on a low alloy steel during erosion – oxidation in a fluidized bed

I. Hutchings, P. Rogers, J. Little, 1997 .

Surface features on a low alloy steel exposed in a simulated fluidized bed combustor environment

I. Hutchings, P. Rogers, J. Little, 1992 .

Low velocity erosion-corrosion of steels in a fluidized bed

I. Hutchings, J. Little, A. Ninham, 1990 .

Laboratory-scale fluidized bed rig for high-temperature tube wastage studies

I. Hutchings, J. Little, Aj Niham, 1989 .

TiN coatings for protection against combined wear and oxidation

I. Hutchings, P. Rogers, J. Little, 1992 .

Solid particle erosive wear testing

I. Hutchings, 2000 .

Strain whitening of a thermoplastic olefin material

I. Hutchings, P. Wang, I. M. Hutchings, 2006 .

The erosion of ductile metals by spherical particles

Ian M. Hutchings, I. Hutchings, R. Winter, 1975 .

Erosive wear of rubber by solid particles at normal incidence

I. Hutchings, J. Arnold, 1993 .

The action of gaseous lubricants in the orthogonal machining of an aluminium alloy by titanium nitride coated tools

I. Hutchings, T. Wakabayashi, John A. Williams, 1993 .

Diamond-like carbon films on sintered carbides - technology and wear resistance evaluation

I. Hutchings, T. Clyne, J. Richter, 1998 .

The erosion of ductile metals by solid particles

I. Hutchings, 1975 .

Formation of adiabatic shear bands by the impact of wedges and cones

I. Hutchings, S. Timothy, 1989 .

Adiabatic shear band fracture surfaces in a titanium alloy

I. Hutchings, S. Timothy, 1986 .

Dependence of Drop Speed on Nozzle Diameter, Viscosity and Drive Amplitude in Drop-on-Demand Ink-jet Printing

Wk Hsiao, Graham D. Martin, Stephen D. Hoath, 2011, NIP & Digital Fabrication Conference.

Indentation fracture of small brittle particles

I. Hutchings, A. Stevenson, 1996 .

Design and selection of materials for tribological applications

I. Hutchings, P. Shipway, 2017 .

Tribological characterization of diamond-like carbon films on nonledeburitic high-speed steels

I. Hutchings, D. Allsopp, T. Clyne, 2000 .

Wear by hard particles

I. Hutchings, P. Shipway, 2017 .

5 – Sliding wear

I. Hutchings, 2017 .

The effect of carbon nanotube orientation on erosive wear resistance of CNT-epoxy based composites

I. Hutchings, K. Koziol, M. Bradley, 2014 .

The number of particle contacts in two-body abrasive wear of metals by coated abrasive papers

I. Hutchings, A. Wang, 1989 .

Impact yielding of high density polyethylene

I. Hutchings, B. Briscoe, 1978 .

Experiments and Lagrangian simulations on the formation of droplets in drop-on-demand mode.

I. Hutchings, G. Martin, O. Harlen, 2011, Physical review. E, Statistical, nonlinear, and soft matter physics.

Fundamentals of Inkjet Technology

Graham D. Martin, Ian M. Hutchings, I. Hutchings, 2012 .

Measurement of liquid film thickness by optical fluorescence and its application to an oscillating piston positive displacement flowmeter

Ian M. Hutchings, Roger C. Baker, I. Hutchings, 2011 .

Surface treatment for 'galling' protection of titanium alloys - characterization by surface-specific electron and Raman spectroscopies

I. Hutchings, J. Temple, S. Myhra, 2002 .

The Kinetics of Gas-Phase Lubrication in the Orthogonal Machining of an Aluminium Alloy

I. Hutchings, J. Williams, T. Wakabayashi, 1995 .

Compressive failure of silica-filled epoxy resins: influence of matrix strength, interfacial bond strength and porosity

I. Hutchings, A. Mouritz, 1992 .

Manufacturing at double the speed

J. Allwood, R. Roy, I. Hutchings, 2016 .

Ink-jet printing for patterning engineering surfaces

I. Hutchings, H. Costa, 2008, NIP & Digital Fabrication Conference.

Droplet Impact on to Moving Liquids

Ian M. Hutchings, Castrejon Pita, Aa Castrejon pita, 2016 .

Adult rat retinal ganglion cells and glia can be printed by piezoelectric inkjet printing

I. Hutchings, K. Martin, W. Hsiao, 2013, Biofabrication.

Influence of inert gases on ionized magnetron plasma deposition of carbon nitride thin films

Ian M. Hutchings, Yukihiro Kusano, Zoe H. Barber, 2003 .

THE INTERACTION BETWEEN TOOL MATERIAL, ENVIRONMENT, AND PROCESS CONDITIONS IN THE MACHINING OF ALUMINIUM ALLOYS

I. Hutchings, W. Liew, John A. Williams, 1999 .

Friction and lubrication effects in the machining of aluminium alloys

Ian M. Hutchings, Willey Yun Hsien Liew, I. Hutchings, 1998 .

Sources of variability in the free-ball micro-scale abrasion test

I. Hutchings, Y. Kusano, 2005 .

A Model for Jet Shortening in Drop-On-Demand Ink-Jet Printing

I. Hutchings, G. Martin, S. Hoath, 2009, NIP & Digital Fabrication Conference.

High Speed Shadowgraphy for the Study of Liquid Drops

Ian M. Hutchings, R. Castrejón-García, J. R. Castrejón-Pita, 2013 .

Experiments and Lagrangian simulations on the formation of droplets in continuous mode.

I. Hutchings, G. Martin, O. Harlen, 2011, Physical review. E, Statistical, nonlinear, and soft matter physics.

Links between fluid rheology and drop-on-demand jetting and printability

I. Hutchings, G. Martin, S. Hoath, 2008, NIP & Digital Fabrication Conference.

Experimental observation of von Kármán vortices during drop impact.

I. Hutchings, A. A. Castrejón-Pita, A A Castrejón-Pita, 2012, Physical review. E, Statistical, nonlinear, and soft matter physics.

Effect of Compaction Pressure and Powder Grade on the Microstructure, Hardness and Surface Topography of Steam Oxidized Sintered Iron

I. Hutchings, R. Binder, A. Klein, 2006 .