Jong-Ho Kim

发表

Evaluation of stress intensity factor for a partially patched crack using an approximate weight function

Jong-Ho Kim, Seong-Gu Hong, Soon-Bok Lee, 2003 .

A silicon-based flexible tactile sensor for ubiquitous robot companion applications

Jong-Ho Kim, Kunnyun Kim, Kang Ryeol Lee, 2006 .

Fatigue crack growth behavior of Al7050-T7451 attachment lugs under flight spectrum variation

Jong-Ho Kim, Seong-Gu Hong, Soon-Bok Lee, 2003 .

FEA for Fabrication Process of PZT Preform Using CIM

Jong-Ho Kim, Seung-Min Baek, Ho-Yong Shin, 2009 .

Development of a flexible three-axial tactile sensor array for a robotic finger

Jong-Ho Kim, Woo-Chang Choi, H. Kwon, 2011 .

Finite-element analysis and X-ray measurement of the residual stresses of ceramic/metal joints

Jong-Ho Kim, Soon-Bok Lee, 1997 .

Atomic force microscope cantilever calibration device for quantified force metrology at micro- or nano-scale regime: the nano force calibrator (NFC)

Yon-Kyu Park, Min-Seok Kim, Jong-Ho Kim, 2006 .

SI-traceable determination of spring constants of various atomic force microscope cantilevers with a small uncertainty of 1%

Yon-Kyu Park, Min-Seok Kim, Jong-Ho Kim, 2007 .

Sensor-less control of methanol concentration based on estimation of methanol consumption rates for direct methanol fuel cell systems

Chonghun Han, Heung Yong Ha, Han-Ik Joh, 2008 .

Millimeter-Scale Piezoresistive Cantilevers for Accurate Force Measurements at the Nano-Newton Level

Yon-Kyu Park, Min-Seok Kim, Jong-Ho Kim, 2013 .

HIGH TEMPERATURE MECHANICAL PROPERTIES OF CVD-SiC THIN FILMS

Jong-Ho Kim, Kwi‐Il Park, D. K. Kim, 2009 .

Elastomeric high-κ composites of low dielectric loss tangent: Experiment and simulation

Jong-Ho Kim, B. Sung, Seungjun Chung, 2020 .

Microstructure and mechanical properties of Al–1Mn and Al–10Si alloy circular clad ingot prepared by direct chill casting

Jong-Ho Kim, Y. Fu, Tingju Li, 2013 .

Robot fingertip tactile sensing module with a 3D-curved shape using molding technique

Yon-Kyu Park, Min-Seok Kim, Dong-Ki Kim, 2013 .

Fabrication of robot head module using contact-resistance force sensor for human-robot interaction and its evaluation

Jong-Ho Kim, Dong-Ki Kim, Young-Ha Kwon, 2012 .

Effect of heat treatment on tensile and fatigue deformation behavior of extruded Al-12 wt%Si alloy

Jong-Ho Kim, Kee‐Ahn Lee, S. Lee, 2017, Metals and Materials International.

Enhanced performance in capacitive force sensors using carbon nanotube/polydimethylsiloxane nanocomposites with high dielectric properties.

Jong-Ho Kim, Sang-Soo Lee, I. Jeon, 2016, Nanoscale.

Development of tactile sensor with functions of contact force and thermal sensing for attachment to intelligent robot finger tip

Jong-Ho Kim, Woo-Chang Choi, Hyun-Joon Kwon, 2006, 2006 5th IEEE Conference on Sensors.

An Analysis of Formability of Micro Pattern Forming on the Thin Sheet Metal

Jong-Ho Kim, Jong-Bong Kim, M. Shin, 2009 .

Fabrication of four-point biped robot foot module based on contact-resistance force sensor and its evaluation

Jong-Ho Kim, Dong-Ki Kim, Young-Ha Kwon, 2011 .

Enhanced electromechanical performance of P(VDF-TrFE-CTFE) thin films hybridized with highly dispersed carbon blacks

Jong-Ho Kim, C. Kang, Heesuk Kim, 2018, Composites Part B: Engineering.

A Touchpad for Force and Location Sensing

Dong-Ki Kim, Jong-Ho Kim, Young-Ha Kwon, 2010 .

Design of Flexible Tactile Sensor Based on Three-Component Force and Its Fabrication

Yon-Kyu Park, Min-Seok Kim, Hyo Jik Lee, 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

Temperature Dependence on Elastic Constant of SiC Ceramics

Jong-Ho Kim, Ho-Yong Shin, J. Im, 2010 .

Reduction of deadweight pendulum motion and its conformation by using a build-up system

Yon-Kyu Park, Min-Seok Kim, Jong-Ho Kim, 2009 .

A STUDY ON THE IMPROVEMENT OF THE ACCURACY OF A SHAVING PROCESS USING A PROGRESSIVE DIE

Jong-Ho Kim, W. Chung, H. Ryu, 2008 .