B. Jang

发表

Axiomatic design approach for marine design problems

Beom-Seon Jang, YoungSoon Yang, Y. S. Yeun, 2002 .

Fatigue-damage prediction for ship and offshore structures under wide-banded non-Gaussian random loadings part I: Approximation of cycle distribution in wide-banded gaussian random processes

Jeong Du Kim, B. Jang, Hyeon-jin Kim, 2020 .

A finite element approach for predicting the full resistance profile of a spudcan deeply penetrating in dense sand overlying clay

B. Jang, M. Duan, J. Zhao, 2019, Applied Ocean Research.

Automatic FE modeler using stiffener-based mesh generation algorithm for ship structural analysis

Beom-Seon Jang, Yong-Suk Suh, Tae-Hee Lee, 2008 .

Improved environmental contour methods based on an optimization of hybrid models

Beom-Seon Jang, Hyeonjin Kim, B. Jang, 2019, Applied Ocean Research.

Yield interaction model of jack-up considering nonlinear load-displacement relationship before yield

Beom-Seon Jang, Junhwan Choi, Hanbaek Ju, 2021, Ocean Engineering.

Comparison of Analysis Methods for Designed Spudcan Bearing Capacity and Penetration Behavior for Southwest Sea Soil

B. Jang, J. Zhao, Junhwan Choi, 2015 .

Application of analytical model in the prediction of dynamic responses and fatigue damage of flexible risers: Part II – Dynamic analysis of flexible risers in large-scale domain using a direct moment correction method

Jeong Du Kim, B. Jang, Hyeon-jin Kim, 2021 .

A Simplified Nonlinear Analysis Procedure for the Flexible Risers in Subjected to Combined Loading Effects

B. Jang, J. Kim, 2019 .

Application of analytical model in the prediction of dynamic responses and fatigue damage of flexible risers: Part I – Improvement of analytical model considering shear deformation and varying tension effects

B. Jang, J. Kim, Ran-Hui Yun, 2021 .

Improvement of the bending behavior of a flexible riser: Part ii – hysteretic modeling of bending stiffness in global dynamic analysis

B. Jang, Ran-Hui Yun, Jeong Du Kim, 2020 .

A study on an efficient prediction of welding deformation for T-joint laser welding of sandwich panel Part II : Proposal of a method to use shell element model

Jae Woong Kim, B. Jang, S. Kang, 2014 .

The effect of weld residual stress on fracture toughness at the intersection of two welding lines of offshore tubular structure

B. Jang, Hyeon-jin Kim, S. Im, 2020 .

Dynamic bending of an ice wedge resting on a winkler-type elastic foundation

B. Jang, S. Løset, Wenjun Lu, 2022, Cold Regions Science and Technology.

Simplified contact-based segment expansion (CBSE) method for assessment of crashworthiness of double-hulled ship structure

B. Jang, Junhwan Choi, H. Ju, 2020, Ships and Offshore Structures.

Residual stresses analysis of friction stir welding using one-way FSI simulation

B. Jang, Ha-Cheol Song, S. Kang, 2015 .

A process-centric ship design management framework

Chang-Hyun Lee, Dae-Eun Ko, Yong-Suk Suh, 2010 .

A linearization coefficient for Morison force considering the intermittent effect due to free surface fluctuation

B. Jang, Hyeon-jin Kim, Kangsu Lee, 2018, Ocean Engineering.

Managing approximation models in multiobjective optimization

Beom-Seon Jang, Won-Sun Ruy, Y. S. Yeun, 2003 .

Managing approximation models in collaborative optimization

Beom-Seon Jang, YoungSoon Yang, Y. S. Yeun, 2005 .

Adaptive approximation in multi-objective optimization for full stochastic fatigue design problem

Beom-Seon Jang, YoungSoon Yang, Dae-Eun Ko, 2009 .

Elastic lateral-torsional buckling analysis of permanent means of access structure

Ming Ma, Beom-Seon Jang, B. Jang, 2011 .

A study on effects of slug flow on dynamic response and fatigue damage of risers

Jeong Du Kim, B. Jang, Dongyeon Lee, 2020 .

The ISSC 2022 committee III.1-Ultimate strength benchmark study on the ultimate limit state analysis of a stiffened plate structure subjected to uniaxial compressive loads

Masahiko Fujikubo, Beom-Seon Jang, Jonas W. Ringsberg, 2021 .

Probabilistic fire risk analysis and structural safety assessment of FPSO topside module

Beom-Seon Jang, Yanlin Jin, B. Jang, 2015 .

Simplified buckling-and-contact-based expansion method for assessment of crashworthiness of double-hulled ship structure

Jung Kim, Beom-Seon Jang, Han-Baek Ju, 2020 .

Benchmark study on slamming response of flat-stiffened plates considering fluid-structure interaction

Dac Dung Truong, B. Jang, J. Ringsberg, 2021 .

Welding deformation analysis based on improved equivalent strain method considering the effect of temperature gradients

Beom-Seon Jang, Tae-Jun Kim, B. Jang, 2015 .

Comparison of friction stir welding heat transfer analysis methods and parametric study on unspecified input variables

Beom-Seon Jang, Sung-Wook Kang, B. Jang, 2014 .

Comparison of friction stir welding heat transfer analysis methods and parametric study on unspecified input variables

B. Jang, S. Kang, 2014, Journal of Mechanical Science and Technology.

A study on heat-flow analysis of friction stir welding on a rotation affected zone

Beom-Seon Jang, Jae-Woong Kim, B. Jang, 2014 .

A study on heat-flow analysis of friction stir welding on a rotation affected zone

B. Jang, Jae-Woong Kim, S. Kang, 2014, Journal of Mechanical Science and Technology.

Welding deformation analysis based on improved equivalent strain method to cover external constraint during cooling stage

Beom-Seon Jang, Tae-Jun Kim, B. Jang, 2015 .

A study on computational fluid dynamics simulation of friction stir welding

B. Jang, S. Kang, 2013 .

The development of a practical pipe auto-routing system in a shipbuilding CAD environment using network optimization

Won-Sun Ruy, Shin-Hyung Kim, Beom-Seon Jang, 2013 .

A parametric study on the use of passive fire protection in FPSO topside module

Beom-Seon Jang, Martin Friebe, Yanlin Jim, 2014 .

Fatigue analysis of floating wind turbine support structure applying modified stress transfer function by artificial neural network

Beom-Seon Jang, Yoon Hyeok Bae, Hyeonjin Kim, 2018 .

Fatigue life prediction of ship and offshore structures under wide-banded non-Gaussian random loadings

Beom-Seon Jang, Hyeon-jin Kim, B. Jang, 2021 .

Improvement of the bending behavior of a flexible riser : Part I – nonlinear bending behavior considering the shear deformation of polymer layers

B. Jang, Ran-Hui Yun, Jung Kim, 2020 .

Study on fatigue experiment for transverse butt welds under 2G and 3G weld positions

Beom-Seon Jang, Seong-Min Kim, Sung-Wook Kang, 2015 .